Video není dostupné.
Omlouváme se.

Willow breast pump fix broken Part 1

Sdílet
Vložit
  • čas přidán 27. 08. 2021
  • Bought these willow pumps for $25 for three off of marketplace. Seller said they wouldn’t pump. Turns out the plastic tab on the mouth of the pump was broken binding the pump causing the light to flash orange and white. Easy fix! Good luck! Check out the second part in my other video.
    Link to Part 2 of video! • Willow Breast Pump bro...

Komentáře • 14

  • @krisstanford8598
    @krisstanford8598 Před rokem +2

    Fixed my wife's that got in water. Didn't know how to open the case before watching this video. Thank you

  • @katyrgs9547
    @katyrgs9547 Před 2 lety +2

    This is a great video!! Thank you so much! I'll definitely be referring back to it when I have problems

    • @ajjw0828
      @ajjw0828  Před 2 lety +1

      Thanks for the feedback!! Happy it helped! My wife’s pump is still holding up good no issues!

  • @HeyItsKayJayBae
    @HeyItsKayJayBae Před rokem +1

    How amazing that he can literally fix anything even a breast pump!

    • @ajjw0828
      @ajjw0828  Před rokem

      Thanks for the kind words!

  • @sray619
    @sray619 Před rokem +1

    Were you able to get the pumps to continue working for a while after? I successfully repaired using this tutorial but the short pin snapped again a day later-it’s hard to get it perfectly lined up and I think it rubs against the mechanism.
    If so, any tricks?

    • @ajjw0828
      @ajjw0828  Před rokem

      Yes, she’s been pumping with them ever since with no issues. I know what you mean about getting them aligned properly, that’s prolly the most critical part about the fix. If they’re not aligned almost perfectly you will run into issues. Also making sure no superglue gets in the pin diameter which could cause binding as well. Unfortunately I dont have any super helpful tips for that. Only think I can think is if you have enough length on the pin,grinding the broken end down flat so you get a smooth flat surface to glue to, hopefully helping to keep the pin straight.

  • @stephanier9341
    @stephanier9341 Před 2 lety +1

    Do you just snap it back into place after?

    • @ajjw0828
      @ajjw0828  Před 2 lety

      I’m not sure exactly which part you’re talking about. If you mean the cover then yes that should just snap back in place. No wires connect to the cover. Here is the second half of the video if it help. Let me know if you have any questions! Hope it helps! czcams.com/video/qNm__YcvDJ4/video.html

  • @ginap719
    @ginap719 Před 2 lety +1

    Where did you buy the used ones? I fixed the crack but it happened again. Was thinking about getting once and taking the piece from it

    • @ajjw0828
      @ajjw0828  Před 2 lety +1

      We got ours off of Facebook marketplace. I think the lady sold all three for like 25 bucks or something like that. I wish since this is a common issue that you could just buy replacement parts from Willow.

    • @kevingiles8472
      @kevingiles8472 Před 2 lety

      @Gin P, my wife had the same issue with one of the tabs on her right pump constantly cracking. She ultimately bought a new set, so she now has an extra left (functional) and right (re-glued) Gen 3 pair she is willing to part with. Would you pay $80 for the pair and a charger?

    • @alabdraza.7233
      @alabdraza.7233 Před rokem

      I have broken one for parts selling it on eBay, I can send you the link if you are interested