Thanks for the support as always mate, I took a chance as it was in a boiler room, the was only tepid at best as well, if it had been red hot there would be no way I would do it
I couldn't quite remember how to check them to be honest, this one was constantly tripping the RCD and was under warranty so I just changed it, thanks for watching as always 👍
They tend to hold back on an air lock, I wouldn't try it though in an house or if the water was hot, I also knew this would come out Ok being fairly new, sometimes a completely failed element will warp a bit making it hard to get out the hole, thanks for watching as always
Hi Tom, a nice take out there Tom, like yourself I always enjoy examining the old pipe work while removing it. It’s even better when it’s time to weigh it all in. The underfloor heating jobs are always interesting for me, I haven’t done much of that and I’m a bit to old to get involved now. Another great film thank you Tom, have a great week and as always take care. 👍👍👍
Thanks for the support as always Chris, the weigh in should be nice at the end of this month, I've had a few good strip out jobs, I much prefer working in older buildings and enjoy figuring out how stuff was done originally, have a great week mate
Thanks for the support as always mate, teamwork is dreamwork, sometimes it's nice to have a mate on jobs like these, shared responsibility when it all goes wrong 👍
Thanks for the support as always Steve, they can go wrong, to be honest I wouldn't normally do that but this was basically outside and the water was only luke warm
Brave man taken that immersion snatch on 🤣 I’ve seen those immersion just spaghetti and become a nightmare to come out so many times , as a heating engineer even I had anxiety 😅
Sorry about the adverts mate, from the 1st of November creators will get more say on where adverts are put in the video, even when I turn them off they still appear on the videos, I guess google has to make money because of all the server space these videos take up, I make very little money from them, and I I'm not sponsored in any way so the actual videos themselves are not one big advert for a product if that makes sense
Thanks for the support as always mate, I do need another weigh in soon, last week was a bad week, a few jobs that I wasn't happy with what other trades had done
That was a belter Tom, rather you than me snatching a cylinder that size. Chin up mate.
Thanks for the support as always mate, I took a chance as it was in a boiler room, the was only tepid at best as well, if it had been red hot there would be no way I would do it
Proper old school that heat exchanger and the coal lorry. Looks like it’s been a bit of a bodge. Proper 70’s bathroom suite.
A love a coloured bathroom suite, they will all be back in fashion soon, thanks for watching as always
You can measure to see if the immersion is knackered mate. Power off your looking for about 20 ohms or check for an earth leak. Great one as usual
I couldn't quite remember how to check them to be honest, this one was constantly tripping the RCD and was under warranty so I just changed it, thanks for watching as always 👍
Nice job with that snatch Tom, saved a load of time. Great vid as always mate
Thanks for the support as always mate, it would have took a good half hour to drain, I wouldn't recommend snatching them though
I expected a lot more water to come out of that cylinder when you snatched the immersion. I might try it One day 😂😂
They tend to hold back on an air lock, I wouldn't try it though in an house or if the water was hot, I also knew this would come out Ok being fairly new, sometimes a completely failed element will warp a bit making it hard to get out the hole, thanks for watching as always
No messing tom ....💪....quality work as always ....best plumbing chanel by far 👍
Really apprecaite that mate, glad you enjoy the content
Nice snatch Tom 😊 I havnt got the balls to do it 😂
Good video as always pal
Thanks for the support as always mate, It is easier with two I find, shared responsibility when it all goes wrong
Hi Tom, a nice take out there Tom, like yourself I always enjoy examining the old pipe work while removing it.
It’s even better when it’s time to weigh it all in. The underfloor heating jobs are always interesting for me, I haven’t done much of that
and I’m a bit to old to get involved now. Another great film thank you Tom, have a great week and as always take care. 👍👍👍
Thanks for the support as always Chris, the weigh in should be nice at the end of this month, I've had a few good strip out jobs, I much prefer working in older buildings and enjoy figuring out how stuff was done originally, have a great week mate
You can't beat a good rip out Tom, nice job as always.
They are nice with the scrap, thanks for watching as always Keith
Nice team work there on the change over I did see the Slight step back as he knew the nut was coming on done😂 good video 👍👍👍👍👍
Thanks for the support as always mate, teamwork is dreamwork, sometimes it's nice to have a mate on jobs like these, shared responsibility when it all goes wrong 👍
Another enjoyable video Tom, again thanks for all the effort’s you go to. 👏👏
Thanks for the support as always Andy 👍
Excellent video, with an interesting range of jobs.
Impressive immersion snatch - only for those that know what they’re doing!
Thanks for the support as always Steve, they can go wrong, to be honest I wouldn't normally do that but this was basically outside and the water was only luke warm
Brave man taken that immersion snatch on 🤣 I’ve seen those immersion just spaghetti and become a nightmare to come out so many times , as a heating engineer even I had anxiety 😅
I've had that too mate, this one was only 6 months old though, I fitted it and had to swap it under warranty, thanks for watching
@@PlumbLikeTom nice one Tom , always great content 👊🏻
Nice snatch job on the cylinder Tom,
Brilliant video as always mate,
Lots of Beers 🍺 money in the scrap 😂
👍👍🤜
Thanks for the support as always Tony, not a big drinker but could do with a new watch strap, might have to treat myself
Simple check with a meter.
You are right, I swapped this one out as it was under warranty, no charge for the customer
@@PlumbLikeTom top service 👌
Great video Tom. You can't beat a good rip out with plenty of scrap - car boot money 👍😎
That's it mate, thanks for watching as always PB 👍
Fair play snatching that immersion.
Thanks for the support as always Paul, it is greatly appreciated 👍
First! Av it Tom. No one can plumb like...
Thanks for the support as always mate, it is greatly appreciated
Good content as usual mate, brave snatch that Tom, hats off to you👍🏻
Thanks for the support as always mate, It was brave if it went OK, stupidity if it went wrong
Sorry to hear you're having a rough time. Hope things get better for you. Always interesting seeing quirky properties. 👍
Thanks for the support as always mate, it was just a bit of a stressful week
Busy busy there Tom .nice job on the under floor heating pipes.
Ripping out is always a pain 👍👍👍
Thanks for the support as always John, the only good thing with ripping out is the scrap
Tom you look stressed out mate, take some time for yourself and relax, nothing is more important than your health 💪
Thanks for the support as always mate
Nice one mate..too many adverts adverts adverts adverts tho
Sorry about the adverts mate, from the 1st of November creators will get more say on where adverts are put in the video, even when I turn them off they still appear on the videos, I guess google has to make money because of all the server space these videos take up, I make very little money from them, and I I'm not sponsored in any way so the actual videos themselves are not one big advert for a product if that makes sense
Interesting jobs as usual Tom, that last one will be £ when you get to the scrapyard 😊 hope you have a better week, the ups and downs of plumbing🪠🚽👍
Thanks for the support as always mate, I do need another weigh in soon, last week was a bad week, a few jobs that I wasn't happy with what other trades had done
Pound to a penny if I did that snatch, I would have cross threaded it --- hope this week is better for you.
They can go wrong, thanks for the support as always Alan
Plenty of scrap Tom
it's building up nicely again, thanks for watching as always mate
🤘😎🤘
Thanks for the support as always Wayne 👍
Did the PRV from the boiler tee into the return in the loft with a remote PRV fitted ?
No, that's as it was mate, the heating pipes went down, shocking install really, thanks for watching