Installing an Auxbeam Switch Panel in the Jeep JK.
Vložit
- čas přidán 26. 08. 2024
- This week I am installing an Auxbeam switch panel in the Jeep. This was a straightforward installation. However, I did have a hiccup or two. With this new 8 gang switch panel I am able to add up two 8 accessories; but which ones? Sounds like an opportunity for a giveaway! Super Clean has offered to send a one viewer from the lower 48 states a bottle of original Super Clean and a bottle of the Super Clean Aerosol. To win you must be a subscriber, and correctly guess what accessory I wire to the Auxbeam first. Thats it! So, make sure you are a subscriber and comment below with your guess. Check back next week to the video on the accessory installation. If you are a subscriber…THANK YOU! If you are not one, please subscribe! Thanks for watching the video and have a blessed day.
Christian Jeep Association christianjeepa...
Mission of Hope: missionforhope.us
Bible Questions Answered www.gotquestio...
Devos Outdoor Gear: devosoutdoor.com
Tailgater Tire Table: tailgatertiret...
Music: CZcams Library: “Go Down Swinging” - NEFFEX
I have seen multiple videos of this switch panel and your video was by far above the rest. You answer all my questions.. thank you
Thank you for watching and adding a comment. If you haven't, please consider subscribing, it really helps the channel.
Thx for the info. I just sold my TJ and bought a JK so I have to swap out my Auxbeam. This video answered my questions.
Glad I could help!
I wanted to thank you for posting your video on the install. I was super skeptical about doing this ony own. It's in and working! Thanks again Rob
You are welcome, I'm glad it helped with your install. If you haven't please consider hitting the thumbs up button, or subscribing...both really help the channel. Thank you for watching and taking the time to comment. Have a blessed day.
The Jumper cable wire run was a very good idea. I will be using that for my Jeep install. Thanks!
Your welcome, it may not be correct, but it has worked for me. Thanks for watching and taking the time to comment.
Thanks for the jumper cable hack! I had the same issue and was just about to order new wires.
No problem! Thanks for watching and taking the time to comment. Have a blessed day.
My guess for your next install would be auxiliary exterior lighting. If I need to be specific, a light bar.
Congradulations Ken Molina, Send me your address, as long as its in the lower 48, I'll let Super Clean where to send the package. DunnageGarage@gmail.com
Great job!
Thank you for watching and taking the time to comment. If you haven't please consider subscribing.
Did you use the ACC tap? On mine the ACC tap is a 5A, the stock ACC fuse is 20A.
Pretty sure I did (I know I have one installed) Remember this swith is low voltage inside the cab, the provided fuse is big enough. All the higher draw parts are under the hood and use the big breaker switch. Thanks for watching and commenting.
Great video! Did you only use the one screw to mount or did you drill into your jeep? S/F
If memory serves me well, I did have to drill a single hole to mount it. Thanks for watching and taking the time to comment.
Has the jumper cable swap been working well with no issues?
It has been working without issue. Thanks for watching, and taking the time to comment.
Which fuse did you use?
The fuse breaker system that came with the kit
@@DunnageGaragewhich fuse would you prefer using? I bought the 6 gang switch and didn’t come with any of that, thanks!
@@dannybaviskar3534 I’m surprised it didn’t come with one. Have you contacted Auxbeam? Thanks for asking. If you haven’t please consider subscribing.
@@DunnageGarage will do! And with more research, apparently if you don’t have heated seats you can use that fuse and it works! 👍🏽
@@dannybaviskar3534 nice, thanks for the info. God bless!