Maruyama SCW9 Pro GBB Submachine Gun | 值不值得買? | The Honest
Vložit
- čas přidán 4. 05. 2024
- #gbbsmg #submachinegun #4uadthehonest #airsoftreview
If you like these videos, using【🤍Super Thanks】help and support more creations
如果喜歡這類的影片，請大大的用【🤍超級感謝】支持我們繼續創作👍🏻👍🏻
Click here to Donate ►
patreon.com/4uadsmartairsoft?...
Click here for subscribing our awesome stuff► / @4uadsmartairsoft
Go check out our new arrival【4UAD最新商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
If You Don't Wanna Miss Any important informations, Follow Us On :
Facebook ► / 4uadsmartairsoft
Instagram ► / 4uadsmartairsoft
Airsoft Service Center ► 4uadsmartairsoft.com - Zábava
Sponsor & Any Good Stuff
影片裡的好東西在下方連結
Go check out 4UAD new Arrival !!
【4UAD 相關商品在下方連結↓↓↓】
store.4uadsmartairsoft.com/
Special Thanks:
➤ACETECH: you guys do make some amazing Grenades and Tracers
Amazing Grenades : amzn.to/3EFsI2W
Bifrost Tracers : amzn.to/3us9Xhs
Official Web: www.acetk.com/
➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!!
Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
zg
Love your GBB coverage. Best on youtube imo
Thanks man that means a lot to us
quality of video is getting better, you deserve more than 1mill sub asap
Haha thanks man we will keep up the work!
Best airsoft channel!
Thanks man!
Love to see this channel do a review on a older gun like a GnG combat machine M4 but love the content criminality underrated channel.
That is some good suggestions thanks man
great gun and great review! 😍
Thanks man glad you like it!
Ive had the pro-G version for about 5 months now. It's also very gas efficient. I have the 1913/picatinny stock adapter, which does need minor shimming to remove side to side wobble.
The nozzle takes VFC NPAS parts. And the outer barrel attaches by 14mm ccw threads so swapping it to any length barrel extension you want is really easy. Just make sure to use heat to loosen the factory thread lock. There's gobs of it.
IMO best out of the box GBBR you can buy for the money right now.
That is some really good information right there
I have the Pro G version and it's going strong even after the nozzle spring snapped. Can't wait for their SD and full length receivers.
I’m sure they got it on the way
穿西裝真的好帥，很有紳士密令的感覺!
Are you guys planning to do a comparison video between Maruyama and Archwick replicas? I have the previous SCW-9 model with the Glock lower. I was looking to getting the Archwick but, if the Maruyama is just as competitive of less money and an extra mag than it’s a no brainer choice!
Great video and I can’t wait till I finally get to put the 4uad buckings to the test this June.
Haha that’s a tricky one but yes we will get one from archwick and see how the review goes
"do i really look that gangster to you?"
thats going in my library im using this
I’m honored
期待ghk ddm4🫣🫣
封面超帥
哈哈謝謝啊～是說我胖了不少必須再努力一下
The year 2024 seems to be the year of B&T😏
Love it
Thanks love!
LOL 循環抖內 😏
謝謝你的分享與介紹❤讚👍
沒問題的～～繼續努力
Loved this video, really interested in getting this now!
Question: What red dot are you using on the gun?
Haha thanks man it a new red dot from vector optic called frenzy 2
when is it releasing in europe ?
Really beauriful smg 🤩🤩🤩🤩
Only need silencer with longer and precise inner barrel and it goes !!!!!
I agree with a slightly longer barrel this one will shoot like an AR
I put a Magpul AR pistol grip on my Archwick APC9K Pro, too. 😊
Hot isn’t it haha
Markman smg 9
Not shown in the video, but they say the receiver group is interchangable with SCW-9 PRO-G already launched.
Can't wait to receive them and add ACR stock on it😂😂
Yep you can do that just fine! Thanks for the mention!
Sorry not related to airsoft but what is the font you use for your intro disclaimer text?
👍👍👍🔥
That's a B&T APC replica.
But I think you should say it has a BDC hopup since it's on the "Bottom".
Very nice but that piece of plastic on the hammer still worries me because it's between a rock and a hard place. There should be a steel insert on the carrier instead. Probably. IDK what plastic it is.
Haha yah will see how long it will last
我希望大大可以介紹vfc fnc, m16a1
前面出現的都會來介紹喔
Waiting for the hpa adapter with drum mag to come out lol
期待apc556
看看會不會收到囉
APC556有要出?!
我終於看到ghk g17 gne5了 我想快上市了
錢包君準備好
@@4UADSmartAirsoft准备好了，出了就冲！
i guess the spring of the mag is too strong at first. after shooting several mags, it relax a bit.
That might be the case~~
@@4UADSmartAirsoft just guess. I had the same issue with my SVD as well
Not my cup of tea when it comes to the form factor, but its gas performance looks awesome, and that only makes it an option for a GBBR SMG =)
Yah man has efficiency really decides if a gbb performs good or not~ the look really depends~haha
Marayama 9mm smg
Who’s marayama?
小賴大大 請問ghk m4 v3近期會上了嗎? 等好久了QQ
嘿嘿準備囉
想看如果裝之前那把SCW9的加速管的表現
應該大同小異，初速+20這樣
我是買vfc mcmr cqb哈哈
應該效果挺不錯的！
Archwick我去年5月份预订一直跳票到现在还音信全无😅现在看来选这个是正确的选择
這把確實不差～而且我認為不太會壞
What do you guys think of the GMH9 . Iam using a 4UAD bucking modify flat hop nub . Plus iam using some 0.6X7mm springs to help with the recoil .
Iam also using a Lambda L3 102mm inner barrel would it compare to this
SCW9
Ghm9 will take quite some tuning I order to get the gas output stable, but I would say friction pro works pretty well with the most of TDC chambers out there
會唔會考慮更換摩擦大師？？
原廠彈道已經很不錯了，但換上摩擦大師一定是個舒服的存在
Aps m4 machine pistol co2
I bet it’s gonna hurt
How is the recoil for this gun? I heard the older maruyama's have weak recoil.
not much but very snappy
這把的板機扣下去怎麼是二段式的呢😮
以及內部需要上螺絲膠嗎？
咦沒啊就是壓下去然後reset
我想請問一下，它在後定處有額外的鋼片設計之類的嗎？怕像ar玩久了後定失效不好修
這邊不用擔心，結構設計的很妥沒啥問題
好奇通用KWA的MP9彈匣嗎
當然不通，kwa 特規大王就別想了
這枝看起來應該比archwick 便宜一點
確實
小赖，那个霰弹枪应该是金鹰做的吧🤣我们好像没那玩意儿
哈哈哈國內應該沒有，但確定是國內生產的，只出口不進口，很可惜。這把槍買好久了惡操過後都還沒壞
Does the GHK Gen 5 take the Gen 3 mags?
Yes Sir
This baby or APFG MPX, which one will you choose?
Damn that is a hard pick
Mpx
Are the mags compatible with the mp9 kwa?
Nope when it comes to kwa don’t even think about it
what reddot do you have on that? it looks like an acro
It’s a new one from vector optics called frenzy plus
Can i use vfc glock mag in this gun?
The previous version yes
I have a question, I bought a new one, and it fire in single fire mod but it will fire in 3 burst in some time. Is that normal in new gun.
this tells me there is something off with the sear, try to lub (add some lubricant) it first and see if this solves the problem
好槍一把，我已經買了❤不過火帽拆不下來
The hop chamber itself has 14mm CCW threading for the outer barrel. If you remove the factory outer barrel, you can add any sized barrel extension you want.
Be careful, the factory used a LOT of thread lock. You will need to use heat or there will be a risk of stripping the threads.
@@treesleavedents Ok！thanks you！
熱風槍出動
@@4UADSmartAirsoft 我沒有！所以我用打火機烤它🤣
超詳細的詳細講解與測試～另外開頭也是十分印象深刻XD
我想説我差點認不出來Andrew😂
哈哈哈我胖了不少
Hello is it upgradable
Yep it is
Put a grenade launcher acetech grenades
Cqb killer
No. The APC9 from Archwick will be the gun of the year.
I will test it out and see if that is true
那請問這版本和上一個glock匣版本比起來，哪一個比較好？
G版本可以塞50發，他本身有附延長槍管的滅音管，他的槍身比較短一點，有裝滅音管大概100初速左右，沒有上加速管大概90。
這個版本雙彈匣，沒有附滅音管，我覺得其他部分都差不多。
我自己是買了一把G版，之後打算買直匣來換，有些人喜歡G版那種短短的感覺，有些人喜歡直匣版本，就看你的XP取向啦~
@@user-pd6wt2dq3h g版我看過有人測不裝加速管102，裝了可以到130
這版比較帥這版比較帥！
@@davidyang6834 喔嗚，那可能是因為我是在冬天測的，而且有用重一點的彈。
其實現在這版的真的很不錯，雙彈匣跟比較長的槍身，這樣才8000而已。但如果妳想要有滅音管的話，可能需要買G版，但不確定直匣下槍身以後會不會賣，這個成本就比較高了。
氣化的部分真的因人而異，我是覺得G版的在冬天連發不太行，但考慮到是Glock 彈匣，好像不怎麼意外🤣
@@4UADSmartAirsoft 我也覺得這版比較帥，小難過的是沒有附滅音管
ghk？ gen5？
Yep Ghk g17 gen5
When?
@@4UADSmartAirsoft wtf 终于要来了？
它雙上彈回不回是新的彈匣彈簧太緊推太快?
我們有試過幾次壓到最滿但後面幾次就都順了
但這隻真的不錯ㄝ
對了 GBB步槍四個彈匣下場夠用嗎？因為我是玩電槍的不清楚
我都帶六個140發靜音匣（火力不足恐懼症（＾∇＾）
跟Archwick APC9K是同一把嗎?
這是長版，而且archwick有授權，不過archwick不知道等到何時何月才有貨
@@LosLos-Sensei 乍看好像 仔細看確實長度不一樣~
價格也差不少...
@@user-gg9lt3sw1v 是的！archwick apc9k跟這把其實就是mp5跟mp5k的分別，只是有沒有授權和內部結構用料的分別，不過上面這把的內部我用磁鐵是可以吸附上去的
The archwick is a different one. It will come with trademarks, some accessories, and iron sights, but will be double the cost. Also will be their first gbb, is more than 6 months late in release and based on the marui zet system.
Maruyama already released last year their apc9k, both full package and a cheaper pistol version (without suppressor and stock)
I own the apc9k full package by maruyama since release and it is a blast. Best gbbr overall
I have the archwick one, that external is great but the internal is crap. Poor gas efficiency, sluggish operation.
Uh oh. Nelson at Archwick may not invite you back if you say this VFC is the SMG of the year over his. Especially after he directly demonstrated how this wobbled compared to his authorized one. That said, at half the cost, this has better value if you say it performs as good or better. That is what you are saying, right? 😂 So get this over the SD2/apc9k?
Guys from Archwick told me they will send me one to test, but so far I haven't heard anything from them just yet
@@4UADSmartAirsoft oh, wow. So you really will be doing the comparison. Definitely a must watch for sure,
and I wonder how you will do a sequel to the Maruyama presentation video. Perhaps Transporter but John Woo style? I think you have the style to do it. Too bad Archwick seems to be delayed on the release. Lots of preorders but no deliveries.
@@jhzfn yah man I'm pretty excited for their release, but to do a review or not I have a spot for them its now up to them to take it or not
B&T, so hot right now.
Hot hot hot
That bb weight....
What about it?
Yeah what about it?
.40 and .43 bbs being an smg and Max distance 45 meters, I was expecting accuracy and range with more useable .28 .30 .32 bb weights. That's all guys.
Excellent！but ⋯⋯⋯too dark
黑人黑夜捉烏鴉
GHK g17 gen5🫵😯🤌
Stay tuned
比較好奇69小隊的由來~
69是一個人人平等舒服的姿勢，為了對抗惡勢力，每個小隊成員必須隨時想起人人平等的信念， 為了民主與平等！69小隊就此誕生
Ｍａｒｕｉ Ｍ４ ＭＷＳ