Installing Frame Sliders On My 2024 Triumph Street Triple RS!
Vložit
- čas přidán 28. 04. 2023
- Quick little video on how to install the frame sliders. I think these are a necessary add on to any bike, as you never know when it will end up on its side... (hopefully never)
The end of the video is me testing out the mic inside the helmet so I can do a "motovlog" style video. Talk about the bike, the roads, things on my mind ETC. I really enjoy making these videos as it's a way to be creative and express the thing I love. Stay tuned for much more content! - Auta a dopravní prostředky
Thanks for the video. I just installed mine a few days ago and used this video as reference.
Nice install. Thanks for the USB tip! 👍🏾
Thank you so much for the video, mate! Used a magnet to avoid losing the nut. Worked perfectly. Saved me a lot of trouble, for sure!! Cheers from Brazil!!
BRAZIL!!! Awesome, I have family out there
@@motocorn What a coincidence!!! I live in the South, at Florianópolis... If you ever pass by, let me know.. Cheers..
These videos are great man!
Thank you!
Excellent work! I need to get a T50 before installing mine
Let's link up for a ride! I was just on that stretch last week
How is the clearance between the sliders and your legs when on the bike? I am 5'10" and on my MT-07 I could not fit sliders like these with the 2 points of attachment and had to go with Evotech ad my knees would have hit the sliders. I am getting a Street Triple 765 and love the look of these sliders but am worried they might hit my legs.
Hi, what is the Nm for tightening those screws?
are the frame sliders the same as the previous models? like the 2019-2022 models?
Got my 2024 RS on Saturday, this channel finna be my go to when it comes to the 2024 model RS mods lol
Congrats! Lots to come :)
@@motocorn was meaning to ask, for the bolts; what was the torque spec they need to be at when putting them back on?
@@Davey_ItsaRS The handlebar clamp? 26 Nm
@@motocorn no, the frame sliders. Wanted to know what the torque spec was for the engine bolts when you put them back on with the frame sliders.
@@Davey_ItsaRS Ahh, Yea idk. I just got em pretty tight. Let me look... 48nm
4.20 secs. Dropped the bolt. Magnet, my friend!
Does this come with replacement nuts and bolts for both sides? I’m pretty sure the shitty evotec ones I tried to install messed up the stock nuts on one side of mine. Thanks!
And which frame sliders are these? Are they the Triumph Cleveland ones that are around 200?
Hi, I’m 5”7 with 29.5 inch inside leg. The RS is tall and so considering R with low seat or LRH R. What are your stats and how do you manage ? For me , slow control , and need for foot down on slops is a consideration with seat height. 🏴
Hey there! Im 5"6 when i wake up so legally 5"5 and i dont find the RS to be difficult. However it is noticeably taller than the trident. I had the Low seat for the RS and i didnt like it. It was too sharp in the thighs for me and i preferred the stock seat if im being honest. But at 5"7, the R with low seat should be great if you find the comfort :)
Hi, I just put a deposit on a 2024 ST RS in cosmic yellow (coming in July) and found your channel and subbed, enjoying the content. I'm 5'7" and 150 lbs. and you are roughly the same size, How do you find the suspension set up from the factory, have you adjusted the front or rear ?
Hey congrats!!! Im trying to get to 150 haha.
I find it to be pretty nice, though im about 20lbs heavier, i MAY go to a suspension specialist and see if he can tune the bike to my weight. I find it to be nice overall though, no real complaints, though i dont know any better soooo.
Nice videos for the new bike. I have also just got exactly the same bike and would like to know if you can show us how to remove the side panels as I cannot figure it out.
I can see the "button" which you describe but cannot remove it.
SUBSCRIBED 😀
You probably figured it out, but in case you didn't...
Press the center of that button in with a little hex or even a paper clip. It will click and stay depressed, then you can just pull the button off. Panel pulls straight off with a slight push forward. Then reset the button for reassembly.
Question: when you got your bike, during the break in period, what RPM limit did you stay under?
Im still in "break in" haha. I just ride the bike how I would, just not bouncing of limiter haha. Apparently the bikes are Ran in on a Dyno prior to shipping so if anything were to happen, it would before the dealer even got it. I was advised not to just sit in a single gear on the highway for too long, and just ride the bike how you normally would haha.
@@motocorn that makes sense, I was told something similar by my dealer, okay ig I’ll baby her a little less now lol, thanks Chief
By the way, what phone holder are you using? It seems very stable.
The QuadLock with their vibration damper :)
Is there any increase in engine vibration or buzz after crossing 6500 RPM ?
Nice bikes! Did they come with LED turn signals? I've seen some videos from the US that dont have LED signals.
Thanks! The street triples come with halogen bulbs for the turn signals in the US... Here's the link to LED ones www.amazon.com/gp/product/B09HBR9TF9/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
@@motocorndid you by any chance end up getting hyper flash with these LED turn signal? I tried installing mine on my bike, I was getting hyper flash and a warning sign “left indicator is on”.
I have dropped a final bolt on a project deep into the engine are on my old bike. Went ahead and bought a telescoping magnet and got it. Cost me 6 bucks
how'd you get your license plate so quick?
I traded in another bike for this one, so they just did a plate swap at the dealer!
I dropped it into the fan too!!!
Win some loose some hahaha
Nice dog 🐶
Thanks!
Debating whether to wait for the cosmic yellow to be on stock or just get the silver ice.
Find the cosmic yellow. I almost settled on silver ice but i went one state over to get the cosmic yellow and i love it. It looks so much better in person its worth it.
Add links to sites for Mods, Better lighting and focus on the mods more, you move around a lot. Hard to see exactly what your doing. Otherwise good job just need some tweaking to your vid style. What Sliders did you install???
This is probably the only video I’ve made where I didn’t include links. Watch the other ones. They progress the longer you watch. This had to have been the 3rd video I made.