If you don’t have a place to break the ferrite core on the cable you can de-pin the header and pull the wire through. Just go slow to make sure you don’t bend the pins
Boa tarde! tudo bem? Estou com um problema na instalação da gun4ir no windows 7, gostaria de saber se alguem ja passou por isso e poderia me ajudar. O windows 7 reconhece o arduino pro micro, quando faço a gravação na placa, ela se transforma em um outro dispositivo (GUN4IR Pro Micro P1) e o software GUN4IR não o detecta para fazer os testes e configurações. Desde de já agradeço.
Nice. I purchased your PCBs to upgrade the less elegant rumble PCB I originally used. Much cleaner design with less wires. Do you plan on posting a video doing the same for the Guncon2?
I was initially planning to, but it wouldn't be much different, as the GC2 PCB has the same components as the GC1 one, with only the extra dpad connector. Maybe I'll do another video later on.
If you don’t have a place to break the ferrite core on the cable you can de-pin the header and pull the wire through. Just go slow to make sure you don’t bend the pins
is it possible to add a bluetooth dongle and rechargable battery to make this wireless sincfe its reconied as a HID device?
Boa tarde! tudo bem?
Estou com um problema na instalação da gun4ir no windows 7, gostaria de saber se alguem ja passou por isso e poderia me ajudar.
O windows 7 reconhece o arduino pro micro, quando faço a gravação na placa, ela se transforma em um outro dispositivo (GUN4IR Pro Micro P1) e o software GUN4IR não o detecta para fazer os testes e configurações.
Desde de já agradeço.
Nice. I purchased your PCBs to upgrade the less elegant rumble PCB I originally used. Much cleaner design with less wires. Do you plan on posting a video doing the same for the Guncon2?
I was initially planning to, but it wouldn't be much different, as the GC2 PCB has the same components as the GC1 one, with only the extra dpad connector. Maybe I'll do another video later on.
superb, I just bought your PCB's and going to get started soon. Just need to buy a license from you first
Buen video. Estoy interesado en las pcbs universales pero en tu pagina no se especifica las dimensiones. Seria muy útil contar con esa información.
Where do I buy these components from in the uk
Are D1 & D2 the same part ?
What is the problem with the aliexpress IRL540 ?
Do you have a link to the LED's needed ?
Many Thanks
yes, same. the aliexpresse IRL often have quality control issues, so YMMV.
@jaybee1584 hi thanks , what value is the capacitor? And can a radial one be used in its place. Thanks again
Bon y’a plus qu’à 🥹🥹