At the Bench: An In-Depth Look at the ARRI SkyPanel S-60C

The ARRI SkyPanel is an LED soft light that is packed with features. The SkyPanel comes in two different configurations and three sizes. In this blog, Ian will take a closer look at the S-60C model. C-model SkyPanels have adjustable color temperatures from 2,800K - 10,000K. In addition, the units have what ARRI describes as Vibrant Color Selection. This means that color hue and saturation can be adjusted. The light can also be programmed to display the color quality of both Lee and Rosco color gels. To read the full post, visit our blog:
blog.abelcine.com/2016/12/29/a...
Sign up for our newsletter so you can be the first to find out about all the latest product specials, company news, free community events, and more! www.abelcine.com/r/signup

i was at a light workshop by arri and the skypanels are a absolute dream ...

[@maheshrai9935]

How to connect 3 or more sky panel and operated by switch or remote or dmx . please tell me which equipment needed for this done

[@AbelCine_official]

The most reliable connection to the Sky Panel is a hard wire DMX 5 pin XLR connection to a dimmer board. Keep in mind that you will need to allocate three channels per unit for dimming. It is important to note that some modes have up to 18 channels of adjustment. It is important to consider the purchase of the ARRI remote for each unit for these deeper levels of adjustment.

[@J-Gx]

9:10 how long has this "gaffer" been working? Righty tighty lefty loosey

[@joeo.8034]

I notice right away that the skypanel doesn't match the tungsten light at all. It looks unhealthy, flat, with a slight hint of green in it. I'm sure you could dial out the green, but it still came now where to matching the prettiness of the tungsten light. For $6,000+ a unit, I want that thing to be damn good at matching a $1.50 light bulb.

[@LeopoldN]

Joe O. Yes you can match tungsten and also control plus and minus green. As shown in the video.

[@juanestevez2841]

Great videos for those of us that don't habe the chance to experimente increíble new technology, because on set we usualy don't habe the time original te physical space.
I'm trying yo find out if it's possible to wirelessly changing the protocol or it's always nessesary to get to the ligth? I'm asking because sometimes the sky panels are on a cherrypeaker or far up on the roof. Well thanks and good work!

[@LeopoldN]

Juan Estevez there is many wireles dmx solution on the market. Arri also has its own one.
There is also a sc360 version that already has wireless system inside the fixture but compatible only with arri controller.
Otherwise there is also a little box (same for every model) that allow you to control your fixture with usb. This is mor for megaboom arm setups

[@sanilalkuttimon1755]

❤️❤️

[@saurabhpatne5532]

What's that white paper on that led sheet?... What is that called??

[@AbelCine_official]

Hello! Do you have a timecode reference for what you're asking about specifically? Also, please feel free to send an email directly to our specialists at techsupport(@)abelcine(.)com if you have a more specific question.

[@manojkumarsaw6629]

Very nice kimat kitna hai lagbhag

[@w.churchill109]

Don't switch it on, tear it apart.

[@paulocesarbicalho1018]

Preciso da tradução para o português

[@paulocesarbicalho1018]

Volto a pedir tradução para Português as explicações sobre o Sky Pennel

[@williamprimrose7648]

hum, the Yidoblo for 1300 bucks beats this price wise, and gives me the same thing, as usual, arri overpriced led nonsense.