Echt super diese Motoren ( Langhuber) geringe Drehzahl und nicht kaputt zu kriegen......ausserdem genialer Motorsound und relativ geringer Dieselverbrauch....echt super !!!
Agreed, if Indian companies got their act together and controlled quality they would be a force to be reckoned with. Some sectors of British manufacturing had quite a bad reputation for quality control during the 70's as well.
750 rpm is considered medium speed. A low-speed diesel is 300 rpm maximum. Medium is 300-1000 rpm and a diesel engine that is designed to work and rev over 1000 rpm is a high-speed diesel engine. Furthermore, I have trouble believing that the teeny-tiny belt shown in this video could handle transferring 18hp between this motor and the electrical (generator?) equipment seen beside it for more than about 45 seconds. Shown here at virtually no load, it seems to be fine, but load that thing up and ramp up the engine's power output, say goodbye to that little belt.
Wenn man jetzt noch eine Abgaswärmerückgewinnung einplanen könnte wäre das ganze noch Umweltfreundlicher (Wie ich gehört habe , kann der Motor nach Vorwärmung mit Diesel mit PÖL laufen )
According to the meters 1.1 kW is being used. The frequency is 48Hz. The engine is running at 643 RPM. So, running a little too slow and with a very low load. How does it run with, say 10 kW load?
QUALITY CONTROL COULD BE POSSIBLE IF PURCHASER MIGHT UNDERSTAND THE SITUATION OF MFG. AS THEY SURVIVING BY GIVING QUALITY PARTS IN SUCH A CHIP RATE. IF YOU WANT QUALITY THAN PURCHASER HAS TO GIVE BEST RATE.
Echt super diese Motoren ( Langhuber) geringe Drehzahl und nicht kaputt zu kriegen......ausserdem genialer Motorsound und relativ geringer Dieselverbrauch....echt super !!!
Simply fantastic. Ingeniously well done ensemble. Congrats. Thanks a lot for saving restoring taping editing uploading and sharing.
Very nice and that mechanical frequency meter is cool...^^
Agreed, if Indian companies got their act together and controlled quality they would be a force to be reckoned with. Some sectors of British manufacturing had quite a bad reputation for quality control during the 70's as well.
Nice sound i very Very like this sound
750 rpm is considered medium speed. A low-speed diesel is 300 rpm maximum. Medium is 300-1000 rpm and a diesel engine that is designed to work and rev over 1000 rpm is a high-speed diesel engine. Furthermore, I have trouble believing that the teeny-tiny belt shown in this video could handle transferring 18hp between this motor and the electrical (generator?) equipment seen beside it for more than about 45 seconds. Shown here at virtually no load, it seems to be fine, but load that thing up and ramp up the engine's power output, say goodbye to that little belt.
400 Volt on 3 phases and 7 Ampere per phase, that is a power consumption close to 5 kW.
How is the engine going now?. What kw can you get out at 670rpm.
Wenn man jetzt noch eine Abgaswärmerückgewinnung einplanen könnte wäre das ganze noch Umweltfreundlicher (Wie ich gehört habe , kann der Motor nach Vorwärmung mit Diesel mit PÖL laufen )
WOW!!!
p
According to the meters 1.1 kW is being used. The frequency is 48Hz. The engine is running at 643 RPM. So, running a little too slow and with a very low load. How does it run with, say 10 kW load?
400 Volt on 3 phases and 7 Ampere per phase, equals nearly 5 kW.
good
I don't see that "fractional horsepower belt" conveying 18 horsepower.
The engine speed was not set to produce 50 Hz, by my eye.
+Ronald Youvan that little belt is just to start it thought?
Looks a quality bit of kit compared to a p.o.s Lister..
nice engine for a small sail boat. how large a propeller can it turn at 750rpm?
That's right
wer hat den importiert ?
Nice
Can you show miniature lister engines and sell them
QUALITY CONTROL COULD BE POSSIBLE IF PURCHASER MIGHT UNDERSTAND THE SITUATION OF MFG. AS THEY SURVIVING BY GIVING QUALITY PARTS IN SUCH A CHIP RATE.
IF YOU WANT QUALITY THAN PURCHASER HAS TO GIVE BEST RATE.
Kensi company da ha engine
Price kitna hai
Is Hp engine Dam kitna ho sakta hein
Konsi company ka h
How much desial used per hours
Please original products japan product is hw much?
Welding machine chalk sakti hai
I need the price
Kaha.milega.masin
was fuer ein typ iss das?
Sounds like a clock.
lots of torqe
25 kw janretar mil Sakta hai
kitna Diseal letah
how are these on fuel?
Consumes very low amount of fuel this is the main reason people still using these
engine run to slow, no 50HZ on the HZ meter.
1006