Toyota SKID Steer Backhoe Mounting Adapter Plate Welding Attachment Bracdo 9MD2 How TO Mate Machine
Vložit
- čas přidán 4. 07. 2024
- Instagram: @LILEVO90
In this video I cover my leaky radiator, how and where to drain the engine oil, the hydraulic fluid tank, the distance between the tires and the frame for tire chains, and how to adapt any mounting bracket to the Toyota machine or vice versa.
Popular part numbers and specs below:
Wheels: 16.5" x 8.25" with approx 4" offset
Replacement wheels: www.solidtiresandtracks.com/16...
Tires: 10x16.5"
Napa 3386 fuel filter
Toyota 23302-31960-71
Napa 1521 oil filter
Toyota 15601-78101-71
Napa 51551 hydraulic filter
Toyota 67512-41803-71
Cyclone air filter 17791-22000-71
Air cleaner 17803-U2051-71
Fan Belt 89323-76004-71
#lilevo
#carguy
#carrepair
#toyota
#forktruck
#skidsteer
#sdk8
#sdk7
#mechanic
#builtnotbought - Auta a dopravní prostředky
The weight plate measurements and tire clearance questions were for me. Thank you for the response. Tires are looking to close for comfort for my chains. Thank you tho!
The factory toyota mount on mine dosent even attach at all to the quick connect. Where your “clamps” are mine are just drop in wedge pins that go to the mounts like you have on the machine and bottom just sits in the hooks. I need to hook up my hoses to the machine then use the boom to push the backhoe onto the machine and drop in the wedges. Ita actually a pretty slick setup and its quick once you figure it out.
awesome video, thank you very much. i see that my 2sdk8 is missing the upper mounts for the support arms to connect to. also my 9hd doesnt have the arms like the ones you had to cut and move inward. apparently someone cut them off before i owned it. thanx again ur awesome
Have you had to replace/rebulid the main hydraulic lift cylinder packing seals? I need do mine and didn’t know if you had a place to purchase the parts for it? Thank you
Main lift cylinder kit and dump cylinders use the same kit: 04651-40600-71
I'm looking at one of these Saturday I guess a 2SDK8. My concern is hydraulic flow. I'd like to run a bush hog or a post hole digger. They need more flow than these have. Any thoughts?
How much more flow than a backhoe?
@@LILEVO brush hogs claim to take around 15 GPM or more. The back how would not be continous,, but intermittent.
@@LILEVO I bought one. Pick it up Monday afternoon. With factory backhoe.
@@spudth nice, worst case you can probably sell it for more if it doesn't dlow enough