Drill Press Lidl Parkside PTBM 500 D4 (PTBM 500 E5) + Wobble fix
Vložit
- čas přidán 9. 10. 2018
- Sometimes I need a drill press, but I don't want to spend a lot of money. So, I bought this cheap Lidl Parkside drill press (500 watt) PTBM 500 D4 / PTBM 500 E5. So I can use it for the Land Rover Defender. This video includes the wobble fix.
I called this vlog a SPECIAL because it's not about the World Trip and the preparations (what this channel is all about). But I still hope you like the video.
Had the same Parkside Drill press for 2 years (£50 on clearance offer at Lidl) with regular use and no issues. Parkside actually do some pretty decent drill bits sets too. But I use Dormer or Presto bits on Cast Iron, Stainless etc.I actually increased the available throat gap by 80mm by fitting a new column made from some scrap stainless tube I picked up from a brewery skip. I can highly recommend this a s solid budget DIY Drill..
Also replacing the bearings with tapered ones will greatly improve the machine and its life
I'm afraid we will end up replacing EVERYTHING on this machine 😉
Thank you!!! I bought a new Scheppach drill press, model DP16VLS. It was unusable because of the quill wobble. Customer service told me that there is no tightening screw.
BUT: I saw your video and started to wonder if there could be a screw on the Scheppach as well - and there it was! At the same place!
Haha, that's awesome man! Glad the video helped 😎
Great video. Might be enough to tip me over the edge to buy one!
Thanks Scott! I frequently use the machine, and I'm still happy with it.
This helped a lot!
I'm glad it did!
Hi ,i have the same one, once when i was drilling in to the 5mm cast iron rod,the Chuck for stuck and after that the press is not working . The motor rotates without the belts ,once belts on its not rotating. I thought may be the capacitor problem but even after replacing the capacitor the same issue motor hums no rotation , have you any solutions for this issue.
Thanks
Have you checked the bolts holding the spindles / drive pulley ? Check all three of them because they can come loose. That's why if you try it without the belt the resistance is gone and there is rotation, but once you install the belt there is too much resistance and the rotating stops. Hopes this helps!
Thanks for responding i’ll check those bolts
Hi i Checked all the bolts they are tight but when the motor rotates (without belts again) i could able stop the motor with one hand just by holding the pulley without any force and also the motor while running not even for 1 min it heats like an iron box (untouchable)
Mmmm... in that case I don't know how to fix that problem. Hopefully the seller can help you out!
Thanx for the 15.000+ views!!I Don't forget to check out my latest vlog : czcams.com/video/pb7x_FXRnEM/video.html
Wat ik denk over de kolomboormachine? Hij is te groot om mee te nemen, haha!
I tried to fix the wobble the same way but whatever I do it still wobbles like crazy
That sucks! Unfortunately I have no other solution.
Check if the bearings have been seated properly if not replace them with tapered ones
tried it sill wobbles...
That sucks!
I had a wobble on mine and did the same thing as u it helped but still wobbles
Update: I removed the chuck and used a mallet to tap it in and it’s is straight now😁
That s*cks!
THANK YOU! i have the same press, and the wobble was killing me.
Drill press starts @3:20
True, but you'll miss all the fun ;)
Don't need one, now I want one hahaha
You don't have to break the bank so... Why not 😃
what chuck woble it has after adjusting, can u measure it ?
I'm sorry I can't do that because of the World trip but the adjustment made a huge difference!
Thanks bro
Good sharing
Thanx ;)
Was weer strak ge-edit, amigo! Als ik jouw muziekritmegerelateerdebeelden zie, vraag ik me af wat ik verkeerd doe, want als ik ditzelfde zou doen, zou me dat dagen kosten! heb je daar een handigheidje voor?
Groetz, Wim
Thanx man! De handigheid is heel veel monteren ( ik heb dat meestal gedaan onder druk van deadlines, dat werkt ook wel mee hahaha) Dan gaat het wel een stukje sneller :) Dus... monteren, monteren en monteren! Ik zie het resultaat de volgende keer tegemoet? ;)
Ach, ik doe het al wel (zie sommige van mijn Nederlandse vlogs op channel Wim Keesmaat), maar het kost gewoon gruwelijk veel tijd. En dan heb je stukjes video die gewoon niet in het ritme passen en dan baal je weer :-)
👍