How to fix and diagnose sliding door not working on a 2005-2012 Honda Odyssey.
Vložit
- čas přidán 30. 01. 2021
- #honda #odyssey #howto #slidingdoor #notworking #diagnosis #fix #easy #doityourself
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok.com/@jvfix
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
=====================================================================
2005 honda odyssey honda odyssey door won't close 2006 honda odyssey sliding door repair 2006 honda odyssey side power door not completly closing 2006 honda odyssey sliding door removal - Auta a dopravní prostředky
Fabulous video Sir. Thanks for taking the time to do it. For me...the best thing about the internet is finding out how to do things...mechanical, construction,....even cleaning a gun. Guys like you who share their knowledge about how to do things....sign of your goodness as a human being. Seriously. we are lucky when we run across guys like you who share secrets of the trade for the guys who are clueless.....like me
Thank you so much for those kind words really means alot to me. comments like this is what makes me to keep going and improve my content everyday day.
blessings and thanks for watching.
The fact you did all of this one-handed is even more impressive.
thanks alot it was kinda difficult to film but I got it done so other people can learn how to fix these cool sliding doors.
@@JVFIXLLC you did a great job and you’re a great teacher, too. Keep it up!
Great video I was able to remove the two top latch mounting bolts, and used the empty holes to spray WD 40 into the latch. This allowed the spray to reach the necessary spot to free up the sticking linkage, now the door works perfect.. 10 minute fix all work performed from outside the Odyssey at the rear latch on the sliding door. Thanks to your video
glad it helped thanks for watching
Man you are a blessing. Thank you so much for posting this video, I was able to fix my door and it works as good as it did before. Thank you again.
thanks for watching glad it helped you.
Thank you so much for this video! Neither door was working even after replacing the side rollers. I decided to try following your suggestion by pulling the latch mechanism and cleaning it. When I put it all back together, the door still didn’t automatically close initially, but I pushed it back into the fully open position and suddenly the switch started working. Repeated the whole process on the other side and the same thing happened. Both doors are now working and the current leak that has been draining the battery for more than a year is now gone! I’m so grateful that you spent the time to take us through this! Thanks again!
Glad it worked out!! Thank you for watching
Waiiiiiit!!!!
That is what’s killing my battery? But how???
SUPER Helpful!!!! I got the door working again, thanks to you!
Thanks for watching
Best detailed guide I’ve seen on odyssey door repair. Thank you!
Thanks a lot!!! And thanks for watching
My '05 Odyssey had this exact problem. I followed your directions and fixed the door myself. Thank you!
Glad it helped. Thanks is for watching
Helpful note; I needed to clean the contact spring as well, but I did NOT release any of the cables except for the one plastic clamp near the screws towards the rear. You will see this clamp at 11:14. If you freeze the video at 11:15 you will see the last clamp just below the white wire. The clamp is just above the yellow marking on the black cable. The motor WILL come out far enough to easily work on the micro-switch and spring. Just have some paper towel or rag to absorb the penetrating oil you need to spray to loosen up the spring. Just keep working the spring back and forth to loosen the debris buildup. Also, the bottom bolt, to release the motor, attaches to a piece of metal that straddles the channel that runs vertically between the motor and rear of the door frame. You will "feel" this channel if you simply put your hand in there. You need to PUSH that channel TOWARDS the outside wall of the door panel to finagle the motor out. That piece of metal may fall off the channel. No worries. Just slip it back on the channel AFTER you get the motor back into the door. The piece has a hole in it which receives that lower bolt. This may sound confusing, but once you work on it, it will be very apparent. This is NOT a difficult procedure. Just be patient and it doesn't take more than an hour (75% of that hour is simply figuring this out as you go along). Good luck!
thanks for this helpful note. I am sure it will help more people.
Thank you for taking the time to post. Latch switch was my issue as well on a touring edition 06 235k vehicle. I’ve replaced the cable before in both doors but this was a new issue. Symptom- DS worked fine. PS door has no feedback from the dash switch, key FOB or door hand on interior or exterior. Checked fuses first (two per door plus backup fuse) but all checked out. Went to CZcams!
The live data from your tool allowed me to narrow in on the issue. Did not disassemble, but blew out debris with compressed air and PB blasted the latch multiple times. Did the other door while I was at it as PM. She’s alive again. Thanks again. Your time taking this video is much appreciated.
no problem glad it helped u out
I bought my Odyssey yesterday and talked the dealer down $500 because the left sliding door would not work. Based on what you showed in this video but without taking anything apart I sprayed the latch mechanism with brake cleaner (which blew out a lot of debris) then soaked it down with penetrating fluid and my door started working! Thank you so much!
Glad it worked out for you. That's the first thing on all the honda odysseys that I have fixed with that issue. It is really common. I would advise you to do the same thing on the other door to prevent it from failing
Thanks Michael and JVFIX! My passenger sliding door (2007 Odyssey) stopped working and there was a battery drain of almost 1 amp. All the fuses and relays were fine, and I did not think this switch would be the problem, because the interior lights did go out when I closed the door by hand. But I sprayed some caliper cleaner in there anyway and as if by magic, the door started working again and the battery drain is gone. So apparently there are a myriad of switches in there controlling different things, and we should not assume that the operation of the interior lights is telling the whole story! JVFIX, maybe you could go a little deeper about the different switches and how they interact?
@@jamesschofield9023 I've got a door that doesn't function and I've previously had a parasitic draw that I never took the time to figure out because if I drive it daily, it seems to be a non issue. Sounds like I'm going to get two birds with one stone when I repair my door! That would be fantastic because I wasn't relishing trying to track down the parasitic draw!
We're on the laps do you spray I'm a girl so I really don't like taking things apart LOL
20:46
Excellent video. Thank you for holding the camera for us. Growing a third hand sure would come in handy. You are the best 👍
yea doing the videos alone sometimes it's abit challenging
Excellent Tutorial! Thank You!
Thanks for watching
Just fixed my van's door by following this awesome video. You saved me tons of $$!! The only thing I also had to do was pull the 7.5amp "Backup" fuse from the panel under the drivers dash, wait 10 seconds, then plug back in. I think that resets it, got that from another video. Anyway thanks a ton!
glad it worked thanks so much for watching
Was your van getting a parasitic draw due to this issue?
Like 0.410 miliamps?
I been doing this to my van, (disconnecting the 7.5 fuse) but after that I use the door a couple of times and stops working again, I go to the fuse, do the proses again and after a couple opens and closes, stops working again.
😢😢
Thanks!
This was a very helpful video. Very much appreciated.
thanks for watching glad I helped
Ty just fixed mine today . Very clear instructions
glad it helped thanks for watching
Excellent video with explanation and very helpful, thanks!
thanks for watching hope it helped
I’m just a lube tech/tire guy, and I futtsed around with changing the rollers cause they were messed up and they wouldn’t open easily on my passenger side and I wanted to fix that, I did, and now they open manually totally fine, then when everything was all back together to see if the doors would close and latch but the back latch on both sides doesn’t grip into the body leaving the doors open just a crack. Was not looking forward to tracking that down but I feel you have just made it so this can possibly be a positive learning opportunity for myself.. so thanks
yea these vans are always having issues with the rear latches because they catch alot of dirt and even leafs.
Thank you for your expertise, I just follow your video and get my fixed. Thanks
glad it worked. thanks for watching
Thank you for this. 👍
THANKS FOR WATCHING
Perfect video. Thank You
thanks glad it helped
Thank you, Thank you, Thank you. This really helped me to get into to the sliding door and get it fixed. Thanks.
Glad it helped!
Thank you! Great video
Thanks for watching
great video. especially for doing it all with one hand!!
thanks a lot really appreciate the comment.
Thanks for the help!!!
Thanks for watching
Great video. Thank You.
thanks for watching
Thanks for a great video.
thanks for watching hope u got if fixed!
Thank you thank you this the exact problem iam having I will do this👍👍👍👍😎
thanks for watching glad it helped
Not sure how dude got dizzy with your video bruh but I can say great job showing this repair and thanks a million! Definitely helps. I’ll try this on my 06 van that has the same problem plus when I close it manually it pops open from the back , any intel would be great. 👍🏼👍🏼
THANKS A LOT ANY QUESTIONS FEEL FREE TO ASK.
4:23...i tried that didnt work,,but all the other stuff did,,,,,lol,,,tnx for video helped tons,,,,,,,,,,,
Thanks for watching.
Awesome! Hooked me scanner up and both are off with door open and yes both doors inop. I havnt started yet but at least I’m close.
blow the dirt on the rear latches first and use w40 to get the dirt loose hope that helps.
I took it all out and cleaned, works like a charm.
Now Passenger door won’t open with inside hand but i can use it to close door. Any idea?
probably the wire that runs to the latch is loose or the handle clip broke
thanks for the video
Thank you for watching
Excelente video grcs
no problem
Thank you very much! :)
no problem
Thanks to everyone in the comments, I went to the latches on both sides of the doors and sprayed them down with penetrating fluid, wiped them with a cloth, and I also had a little brush next to me I used and the door started to work again. While spraying down the latches I also took off the tailight and side piece and cleaned the wire and roller and after all of that, it finally works 🙂
glad it worked. thanks for watching
Tankyou For información excelente
thanks for watching
Wow you are so smart
thanks for watching
Thank very much
No problem thanks for watching
Thank You
glad it helped
Very good nice idea before time am one car all open back side panel and motor change but not working this switch motor complete change door slide after
Thanks for watching
dios te bendiga amigo por eate video gracias
gracias
Great video. That process fixed the pulling door in too far and then releasing. However, when in drive still beeps like it's open. Any idea what else to do other than replace the latch?
yes it could probably be the latch switch getting stuck. with a scanner is visible to see it the switch is operating good or not.
This was an excellent video, and thank you so much for making it. I had a question will this work on my drivers side sliding door that seams like there is no power going to it?
yea It should, both sliding doors work the same way.
Thanks for responding after disconnecting the cables that go to the sliding door the door worked again. I guess by disconnecting it it reset the module. I tried disconnecting the battery before thinking it would reset the module but it wouldn't fix the problem of no power to the driver's side sliding door. Then by disconnecting the door connectors the module came back on. In regards to the parasitic drain I found that taking the plastic pieces on the locking mechanism off allowed the doors to fully lock and not pop open again solving the parasitic drain problem as the modules on both doors could go to sleep.
what are you using to get the initial diagnostic reading - that computer/tablet looking thing? will auto zone do that for me? the local dealership says its $125 just to diagnose my sliding door problem.
It's an Autel scanner. If you go the autel website you'll find different models. And autozone won't be able to read this they only give you check engine codes.
Thanks for the video! Perhaps a tripod might come in handy.
Yea getting one of those this year for more stability.
Thank you. I’ll give this a try. My door works Intermittently.
What city are you in and what do you charge for this type of repair if I’m unsuccessful?
Thank you!
I am in Visalia California. usually for this repair is about 300 if there is a part we need to change.
I’m having similar problem with the left sliding door not opening for 2019 Honda Odyssey you think it could be the latch not being released… when I press the switch by the steering it beeps but the door doesn’t open
first check if you have dirt in there it could be obstructing a little switch not allowing the door to be closed and if it does not work it will need a deeper diagnosis.
the right sliding door is more difficult to get to because of removal of the rear seat, panels and the HVAC duct work fan unit.
yea actually that is the hardest one.
What Autel Diagnostics Kit are you using?
I use 2. the autel IM608pro and the maxisys Elite
How do you test the switch with the red & yellow and black wire mine has no reading of any kind?
just put the multimeter in continuity and try to press the switch and see if if the continuity cuts or not.
@@JVFIXLLC Thank-you for the answer, But I'm talking about the switch on the lock, it's actually not a switch it has 3 wires, it's not the micro switches they have 2 wires. I put my multimeter on the black and red rotated the switch nothing, put it on the yellow black rotated, nothing. Don't know for sure, I even looked for ohms, nothing.
I have a 2005 odyssey. My right sliding door opens and closes fine 2 or 3 times but on the 4th try the sliding door light comes on my dashboard and the door won't even try to open. Do you have any idea what might be happening.
it might have mud stuck in too. try the w40 and also if you can try a to blow out the dirt from there/
When the button is off my doors are like impossible to open, yours slides easy you know why mine won't open
try to open it manually and spray w40 at the back of the sliding door it has 2 latches one at the back and one at the front they usually get clogged with dirt building up overtime and blocks the switches making thinking the module that the door is not locked
@@JVFIXLLC yes it's hard manually, I think it needs a new wheel bracket. I sprayed the latches it open and closes now but just hard opening
Anyone aware of after market replacement clips for the cables?
on ebay you can find those clips or you can use zip ties
No need to remove those 2 cables and before putting the door plastic panel make sure ur window rolls up and down as it should .
thanks for the feedback. yea you are are right there is no need remove those cables
Hello, thank you for posting, "B1222 Code - Short In The Rear Mode Control Motor Circuit" pointed me to this video, can someone point me to the correct fuse location for this circuit, I am measuring 1.7 amps draw inline on the negative terminal, thank you.
hi sorry for the late response did you ever figured the problem?
@@JVFIXLLC actually really NOT the battery started holding charge, my ~$50 clamp meter used inline had poor small range when I switched to a quality HP meter I started getting sub-zero amps readings. However since that time (2 months ago) I have the sliding doors power switch, located on the left of steering wheel, OFF, I have not re-enabled it and tested for a current draw inline so the problem may still be around with my left/driver sliding door not working. I don't know what to say about Honda vans a hate/love relationship at best :) there is plenty of design-to-fail parts all around the vehicle, I know same with lots of vehicles out there.
What code scanner is that?
the scanner I use is from Autel it's called autel Elite. there a different models and all of them are pretty good
What model is your autel scan tool?
hi I use 2 models the IM608 and the Elite. there are many versions with cheaper prices too.
Hey can u tell me which scanner u used to do this i have a mx808 and its not giving me the option thank u
I use the autel elite and im608. that one u use should give u data read but honestly I haven't used that one.
Thank u appreciate it
Thank u very much for this video and advise my sliding door is fix
Great video, but door still dont work, do i need to replace the micro switch
i would advise you to remove first the latch and check if any dirt got stuck in the switch 90% of the vans i have fixed always have the same issue if you had a scanner it would be so much faster to diagnose it but try that first and let me know.
Hi there. Tried scanning a honda odyssey 2002 with an otofix d1 lite (autel software), but for some reason the scanner gives me a "no response" result for the body electric module. Any idea what this "no response" could mean?
are both your sliding doors inoperative?
@@JVFIXLLC Negative. The right side is operative. Only the left side is inoperative, which is why I was surprised there was "no response."
@@JVFIXLLC Hi there. Just wondering if you got my reply from before. Still trying to figure out why my body electric module shows a "no response"
Thank u! I have 2012 Honda Odyssey can’t open or close automatic or manual mode it’s stuck in almost close mode when I forced to try to close the door. Other side worlds just the passenger side sliding door. It began slowing down closing for awhile or it may close halfway automatically then reopen. Now it doesn’t open or close at all.. please help?
Sounds like u have a latch problem and if it doesn't open from outside or inside u will need to remove the panel from inside to be able to open the door unfortunately.
Is that expensive? Ur video is great but I’m not a big mechanic..
@@JVFIXLLC does not open from inside or outside just remains partially open since I used muscle strength to close as much as I can manually
Any mechanic or have to go to dealer?
on 2005 driver-side door does not open manually or with power how do I open it?
Maybe your latch mechanism is jammed and to open it you have to remove the door panel
Estoy trabajando en una 2011 honda odyssey...cuando cierro la puerta corrediza de el lado de el chófer se vuelve a abrir...alguna idea??
suena como si la Palanca para abrir la puerta estubiera atorada en abrir. y tambien puede que el switch donde esta el chofer tambien este pegado. es dificil saber solo con un scanner puedes ver Los valores en vivo y asi encontras la falla mas pronto
can u do this in a regular shop?
Yea a shop with enough electronics knowledge should be able to fix it.
What if you don't have a scanner that operates the doors?
I would recommend you to first blow with air the front and rear latches 90% of the time is mud trapped in the micro switch.
Will these switches not working cause a battery drain?
I don't think that can cause that switch to fail.
I guess I'll find out soon.
Will a blue drive scanner work on this problem?
Honestly I haven't used that scanner.
I believe there is a pair of jumper pins at the driver side fuse block that you can jump and pull body codes from the dashboard display
No, it won’t work
the switch for one side door doesnt do anything and we noticed (not sure if has anything to do with it) the same side tail lights dont work. brought to dealer but they dont seem to have much training and couldnt figure it out. van was in shop 9am-2pm. Shouldnt they have a scanner to guide them?
yea with the scanner u can know right away if it's the switch on the dashboard nor working or inside the sliding door
@@JVFIXLLC thanks. Van went in shop 9am today. Dealer never called us. Around 530 got VM that they never got chance to look at van. We miss good customer service that seems has vanished
@@JVFIXLLC dealer today said the control unit ECU needs replaced $700
the unit that controls the door?
I honestly have never changed one but who knows anything could happen. I would start by checking with a scanner if there's any communication with that module and checking all fuses first too.
@@JVFIXLLC paperwork said recommend replace slider control unit and right below that had a description on ECU so thought was weird because ecu has nothing to do with door. All we could think of is they want charge us the price of ecu for a slider unit otherwise doesnt make sense. We read reviews of this dealer and seems known for scamming customers
how much does the scanner cost?
This scanner is a professional level scanner and was around 3k but there is cheap ones at autel store.
How do you guys get the door open my 06 odyssey has the door stuck closed wont open at all like its not unlocking all the way
u will need to open the plastic cover feom inside and it takes some time to get it out.
I took the plastic off but i still cant get the door open
@@edward3441 ok then u have 2 latches at both ends of the sliding door and u have to pull both cables so both can be opened at the same time u will probably will need help to do it.
Tried that seems like the door just dosent want to open ill try to force it if not ill take it to the shop to see if they can get it open
Your video was great tho super good on instructions
3, 2, 1 boom! Gone.
Yeap gone lol
My door is stuck shut. I dont know how im going to do this.
force the inner door panel to come off that's the only way
I jumped outta my seat when the pry bar went all ham on the besel
man you gotta be careful.
My 05 Odyssey passenger side door window motor gets hot with engine off key out. If all plugged in drawing around 700 ma, so I have to keep fuse #7 (back up) out. Also, window will only go down, will not go up. I had to use a power probe to manually get the window up. Any idea what it could be?
A module controls the windows for the odyssey. And those nodules are located at the back pillars of the van there are modules separate for each door. You will need an electric diagram to see the colors of the wires at the module because they change a bit
@@JVFIXLLC Could a Snap on scanner read which module is bad?
Yea you could monitor the data of the modules with a snap on scanner
What's the name of the part this is my issue as well
it's called ratchet micro switch but the Autoparts will want to sell you the whole part it's a common issue for the door to build up dirt and get the micro switch stuck making see the ecu that it's still open.
@@JVFIXLLC my problem is that I can pull the fuse to reset the slide door and after a few cycles it will set the light again and the door will not work... Mine is the passenger door do u have a video on that side? And is there any direct way to contact you with questions.. I plan on tackling this issue within the next 2 weeks
What if the door dosent even open in manual
then you need to open the panel from inside to be able to access the latches
where did you plug the scanner?
All cars have an obd2 port mostly located under the drivers foot well
It won't close and I want to close it manually
If it doesn't close manually then u have a latch problem. U can put the door in manual mode where the switch is for the doors on the driver side .
Good information, side door has been a bitch
yeap it is hard when it gets stuck.
The sliding doors are a problem man it should be recall. It is not safe you can't even close it manually all the way
yea you right it should be a recall.
@@JVFIXLLCalso it drains the battery because the door doesn't close all the way. I think it's a flaw they didn't see coming or they purposely did it
You make me dizzy look your video. Try keep camera on one place.
Apologize for that. I already got a stabilizer to make better videos.