It Must be centered in the wall. the sticker indicates with dashed lines. Angle must be mechanicaly fastened to the damper on both sides of the finished wall around the perimeter of the opening and one side of the connecting ductwork must be a breakaway connection, usually the unoccupied space.
Thanks for the video it was helpful, but just have a question, " do you know if you require a smoke damper when taking a fresh air right from the exterior wall? Thanks again for your time on answering this. Ray
Go watch this video on a fire damper which is a curtain style one. Sorry, I don't check this very often, but am glad if it was helpful. Fire Dampers: czcams.com/video/RQ1-lXkVD04/video.html
Just for my personal education and not sure if this is a stupid question but, Does fire dampers requires to be firestopped? sealed in the annular space? Thank you.
Thanks.. its very much beneficial knowledge... I hv some doubt in this... The temperature sensor installed there... Suppose we have installed a MSFD already and now we want a temperature sensor in that.. is it possible to do so .. If u can share ur contact or mail id... Plz do it vl b handy for me
It Must be centered in the wall. the sticker indicates with dashed lines. Angle must be mechanicaly fastened to the damper on both sides of the finished wall around the perimeter of the opening and one side of the connecting ductwork must be a breakaway connection, usually the unoccupied space.
5min of education, then“Lets squish a banana” , then back to education
Finally! A damper than can handle all the rogue bananas that end up in my air stream!
Helpful vid though, thanks!
Thanks man I'm studying for my Reg 4 very helpful info thanks for your time
Thanks for the video it was helpful, but just have a question, " do you know if you require a smoke damper when taking a fresh air right from the exterior wall?
Thanks again for your time on answering this.
Ray
Do like to share this video please.
Please make video, what is butterfly, motorized, smoke, fire, splitter, gravity damper. And how to work these. How is in original look.
Go watch this video on a fire damper which is a curtain style one. Sorry, I don't check this very often, but am glad if it was helpful. Fire Dampers: czcams.com/video/RQ1-lXkVD04/video.html
Helpful! Thank you. 😊
Just for my personal education and not sure if this is a stupid question but, Does fire dampers requires to be firestopped? sealed in the annular space? Thank you.
we need more vedios
Thanks 🙏
Very helpful thanks
Does it matter what way the air is flowing through it , or could it be flipped to the actuator would be on the other side of the wall
No
Thanks.. its very much beneficial knowledge...
I hv some doubt in this... The temperature sensor installed there... Suppose we have installed a MSFD already and now we want a temperature sensor in that.. is it possible to do so ..
If u can share ur contact or mail id... Plz do it vl b handy for me
So fire alarm relay is normally open?
Can I use a fire smoke damper as smoke damper only
Hi