Fixing my overheating 240sx ka24de Try This Thermostat MOD
Vložit
- čas přidán 26. 02. 2019
- I tried over and over to bleed the system just wasn’t working. Drilled some holes and bam no overheating but, it kept it too cool during the lower temps.
I pulled that thermo and put a new on with just one hole and it’s better then ever
**9 Months later**
So since I’ve been driving with the extra hole drilled out when it’s cold like now November 20°-40°The car will only get 170° give or take. I don’t even turn the fans on any more.
I would just pull the small brass nipple out and bleed it like that. Should be good to go!
Today Thanksgiving the car got pulled into garage for a new tube front and a new cage! I’m going to make some videos as well as fabricating a tube bender!! - Zábava
Thanks I'm having same issue my bottom hose cold ur video is very helpful!!! Did u drill hole top or bottom?? And yes ka's r bitch to bleed also nice car!!
HYPE WARRIOR!! So since I’ve been driving with the extra hole drilled out, when it’s cold like now. The car will only get 170°. I would just pull the small brass nipple out and bleed it like that. Should be good to go! Thanks for the love btw! Havnt posted a video in a while maybe I should just do time laps of the cage and tube front
@@itsreamo ur welcome and ya I can't wait to see the cage and tube front video, ur vid motivated me to work on my s13 and my Japan visit dream!!
HYPE WARRIOR!! Yoo that’s rad! I’m excited to go to Japan
You need the next higher temp. (over oe) w/a single small hole drilled, that'll work for you in that PA weather, trust me bro-sum👌
After drilling hole. The hole is at top of thermostat when putting everything together? A clock, hole is a 12.
Im about to do this, I was thinking to just drill the jiggle bit out make the hole larger. What temp does it stay at now?
tompwh I can drive with no fans on and it stays at normal temp 180-200 something like that. I have gauges I’ll be installing soon for a more accurate reading.
tompwh just still out the jiggle bit. If it’s not enough just do one more. Then you’ll be set!
Can you explain: I would just pull the small brass nipple out and bleed it like that
Thanks
Yea do that, also depends on your setup and if there is a bigger issue. Diagnose first
Why not just buy another thermostat?
Will this work on a g35
Michael Lyle droll one hole, bleed the coolant. If your still over heating and know for a fact that it’s cause you can’t fully bleed it then drill another hole if you need.