How to Use Slide End Tubes for Miyuki Delica Bead Weaving
Vložit
- čas přidán 6. 05. 2013
- beadaholique.com - In this video, learn how to use slide end tubes to finish square stitch or loom woven size 11/0 Miyuki Delica seed beads.
Designer: Megan Milliken
You can find the supplies in this video at Beadaholique.com
Miyuki Findings Gold Plated Seed Bead Slide End Tubes 20mm (2)
SKU: FCO-9090
beadaholique.com/products/miy...
Miyuki Findings Gold Plated Seed Bead Slide End Tubes 15mm (2)
SKU: FCO-9092
beadaholique.com/products/miy...
Miyuki Findings Silver Tone 2 Loop Seed Bead Slide End Tubes 35mm (2)
SKU: FCO-9094
beadaholique.com/products/miy...
Miyuki Findings Silver Tone 2 Loop Seed Bead Slide End Tubes 60mm (2)
SKU: FCO-9096
beadaholique.com/products/miy...
Miyuki Findings Gold Plated 2 Loop Seed Bead Slide End Tubes 60mm (2)
SKU: FCO-9095
beadaholique.com/products/miy...
Miyuki Findings Gold Plated 2 Loop Seed Bead Slide End Tubes 35mm (2)
SKU: FCO-9093
beadaholique.com/products/miy...
Miyuki Delica Seed Beads, 11/0 Size, 7.2 Grams, Matte Transparent Kelly Green DB776
SKU: DB-776
beadaholique.com/products/miy...
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
SKU: XTL-0020
beadaholique.com/products/bab...
Beadalon Large Beading Mats - Prevent Bead Rolling 13 X 18 Inch (Set of 2)
SKU: XTL-9935
beadaholique.com/products/bea... - Jak na to + styl
Thank you very much for this tutorial I actually had the hardest time figuring out how to put some kind of clasp at the end of my bead woven jewelry and I didn't even know that those were for the bead woven jewelry. This was a very easy tutorial to follow and didn't take forever with a bunch of talking you got right to the point so thank you. Also the fact that their are dislikes on this video just seem ridiculous and shows that there are people that just want to be negative Nelly's for absolutely no reason. Id really like to understand why someone would dislike this video is there a hidden message or something that is bad? If you didn't like the video MOVE ON TO THE NEXT ONE.
Thanks Britt! We're not too worried about a few dislikes, we've noticed that seemingly every video gets a few dislikes early on matter how popular it goes on to be. Honestly I think some of those clicks comes from spam accounts trying to trick CZcams into looking like active members of the community. We're not perfect, but we know when we've made a good video that helps people and this one's been a hit over the years.
@@beadaholique oh I didn't know that was actually a thing people do. Never even thought of it being a scam I guess I just automatically thought it was people just being negative and I think that shows how negative people have become these days. It's sad when that's the first thing I think of. Well I'm very glad you don't let it get to you. Thank you for your video I liked it very much and the dislikes that are real people don't have a clue.
you demonstrate so many handy and innovative items. thank you so much for sharing! Bye
How do I weave in all that thread? That’s connecting it to the loom?
Yes we do. The links for the supplies in this video are located in the video description underneath this video.
You can get them on Beadaholique . com's website. The links for the supplies in this video are located in the video description underneath this video.
Good to know. I wondered if it would work or not due to the bead orientation. Ladder stitch they don't lay on their side so I guess nothing to really grip them with. Thanks for the quick response.
Great Idea.
Yes, as I said, these findings are designed for size 11/0 Miyuki Delica beads. They won't work with other types or sizes.
Technically, they would slide on to the ladder stitch, yes. My concern is that they would only be anchored to the ends of the rows, and with ladder stitch wide enough to fit these findings, it may gap away from the tube in the middle.
Could I do the same using a square stitch as I have trouble with looming, can't seem to finish it if securely enough.
They pull apart mind I'm still fairly new stuff this.
Thanks for your great videos 💅
If you are wanting to attach a clasp to both ends, yes.
I wish they made sizes in-between the 35mm and the 60mm, because I have a loomed piece (29 Delica 11/0 wide) that is 43mm wide, and don't know what type and size clasp to use! :)
Thank you
Can I just make a suggestion, it's actually easier to finish closing it by pushing it onto the table top. x
I wish you could buy these for seed beads :(
I wish these came in more sizes. They don't appear to have a 40mm size and 50mm size. It jumps from 35mm to 60mm. So, you need to get these in more sizes, please, if they ever become available. Also, a beading friend of mine said she used this with a peyote piece, all she did was grab the up beads with the slider tube. I have yet to try this myself, however. But, just wanted to pass that along.
Looks great. Is there anything similar suitable for a peyote stitch?
The reason this works on loom work or square stitch is that there is a straight channel between the rows. With peyote stitch, there isn't a clear channel between rows, so a finding like this would hit every other bead. I have heard of some people that use ribbon crimps to finish peyote, but you would need to be really careful that you didn't tighten it too much and break some of the beads.
Love these fittings what fittings do you suggest for loom weaved bracelets using miyuki delicas 11/0 please
The findings used in the video are perfect for 11/0 Miyuki Delicas. Here is a direct link to them on our site: beadaholique.com/search?type=product&q=Miyuki+Findings+slide+end+tubes&_=pf&pf_v_brand=Miyuki
Thank you.
Hi, can I use 15/0 delica's? Maybe with some glue?
Thanks you so much for all the video's.
Greetings from the Netherlands.
Jolanda.
It should work with beads that are 2mm or smaller but they are designed specifically for miyuki delicas
Great video. May I ask... Can you use these for other than what you stated? Like, using them for leather ends, or other seed beads? Just wanted to know bci have allot of them. 😁. Thank you for your reply. 🌫️💜🌫️☮️✌️☯️🙏
They are made specifically for Miyuki 11/0 Delicas, so they can go on beads that are the same size or smaller. Thank for watching!
Wow! That really gives a high end look! I need to get some of those! How many come in a package?
You get 2 Tube Ends (1 Pair). You can get the supplies featured in our videos on Beadaholique.com's website. The links for the supplies in this video are located in the video description underneath this video.
The longer tubes have two loops at each end. What sort of clasp would you suggest to finish a wider bracelet that had the two loops?
ddawn23 I think you can pretty much use whatever clasp you want and to get to the clasp, you can build a little chain of jump rings from the loops on the slide ends. www.beadaholique.com/t-ba-project-B2118.aspx?CZcams& This example ends up using 2 toggle rings but you could easily just link the jump rings to a single clasp.
gracias por compartir preciosa un beso
would these work with a ladder stitch?
Do they make these for 6/0 beads and if so where can I find them?
We have not seen these exact ones for 6/0 beads but there are these ones here which have a similar design: www.beadaholique.com/nsearch.aspx?page=1&keywords=beadalon&x=21&y=15&ShowPics=1&refine=y&Brand=Beadalon&Category=FINDINGS&Subcategory1=Clasps&Subcategory2=Lobster+Clasps&Price=%243+to+%245 The clasp is 5mm in diameter and a 6/0 seed bead is usually around 4mm in diameter. These clasps will work with smaller beads too.
Is there a clasp for bracelets 8 beads wide ? What would be the best closure for narrow bracelets ? Thank you
Hi ! Please watch this video www.beadaholique.com/how-to-attach-tube-clasps-to-peyote-bead-weaving.html . You can also email us at service@beadaholique.com with the specific beads you are using so we can further assist you.
Canwe use this clasp for completing bracelet or necklaces. Is it easy to use. Pls let me know. For what is best used for . Thankyou.
We recommend these tubes for bracelets. Thanks for watching!
Does it matter what size the bead is and the tube
Is there anything similar you could use to hang a small finished peyote picture that’s just over 3” wide. I thought I came across something some time ago and can’t remember what it was called. It was a metal tube like the one you showed her. Thanks in advance for your help.
Hi! The only thing I can think of is if you tried to hang it from several of these and just cut off what would become the middle tabs. I have not seen a slide tube that is that long before - but it would be cool!
@@beadaholique That sounds like an idea. I’m still researching other possible ideas. Thank you so much for getting back to me so quickly. I agree it would be cool to have longer ones. An adjustable one sounds even better. Just not sure how that would work.
Can you make a video or link me to a video showing how to weave in the ends of a piece? I watched this video and your video on how to attach two pieces together to make a longer piece, and in that video as well they mentioned that they had woven in the ends to give it a clean finish. I didn't know how to do that, so I searched how to, and couldn't find it. I tried by myself and just ended up messing up the whole thing I tried to make :(
Our video on how to finish bead weaving piece can be found here: czcams.com/video/Xn-8T7pM0cY/video.html
Thanks for watching!
What do you suggest for peyote stitch? its the one I use the most and Im having a very hard time with endings. TIA
Peyote stitch is definitely a challenge because of the staggered ends. I have been working on an idea on how to make it work with these types of tube ends but I am still trouble shooting the concept. You can use ribbon slide ends. Here is a video beadaholique.com/products/how-to-attach-a-ribbon-slide-end-to-peyote-bead-weaving. I hope this helps!
@@beadaholique I actually found a tutorial that shows just basically adding a bead beside your last row of beads to make it work with these clasps. I have done that a few times now and it seems to be working great!
Do they make things like this for other size seed beads?
These types of ends will only work with a cylinder bead that is very uniform in size, like a Delica. Even in a different size, round seed beads with less uniformity would not work with something like this because they need to fit just right.
where do you get these slide end tubes? Do you have an item number?
hi ^^ please tell me how did you finish the bracelet. the threads
Our video on how to finish bead weaving piece can be found here: czcams.com/video/Xn-8T7pM0cY/video.html
Thanks for watching!
@@beadaholique i did make a huge work on a loom, now i have the threads at the end, i don't wanna glue! and i don;t gonna saw it on fabric! if i knot it, do i have enough space to put the miyuki delica in the tubes? i'm afraid it wil not fit. i use C-lon D and miyuki thread to weav..... HELP PLEASE..... 😃
I need a slide clasp for 6/0 beads and cannot find one. suggestions please help thank you
We have slide clasps that you can actually pry open to accommodate 6/0 seed beads: beadaholique.com/products/slide-connectors-with-extension-clasps-26x5mm-2-sets-silver
You can see the result in this project here:
beadaholique.com/products/alicorn-loom-bracelet
@@beadaholique Thank you
@@winningnumbers Glad to help!