REAL RIAA Pre Amp for any NUMARK PT01 Scratch Aftermarket Tonearm

Sdílet
Vložit
  • čas přidán 6. 08. 2024
  • Video Installation Guide
    This real RIAA pre amp will help you to get the best sound quality out of any Numark PT01 Scratch aftermarket tonearm.
    Kit can be purchased here: portablismgear.com/riaa-pre-a...
    Supply Voltage: 9-24 VDC max.
    Input Impedance: 47 Kohms at 1kHz
    Output Impedance: 47 Kohms /200 Ω min
    Input sensitivity: 2-3mV / 5mV max
    Output: 300Mv/ 1.8V max
    Gain: 40 db
    S/N ratio: greater than 85db
    Frequency Response: 20Hz to 20kHz +/- 0.5db
    THD: smaller than 0.05%
  • Věda a technologie

Komentáře • 13

  • @azok2033
    @azok2033 Před 2 lety +1

    Y’a même pas cette objet dans votre site… ça craint 😅

  • @ChristosNikolis
    @ChristosNikolis Před 2 lety

    Hi guys, this is out of stock for almost 1 month now? :-) Any chance you could let us know when the next restock is, please? Thank you for your help, in advance.

    • @PortablismGear
      @PortablismGear  Před 2 lety +1

      Hi, thanks for asking. The chip crisis is actually a problem worldwide making it hard for us building or offering almost 70% of our items. They will definitely come back in stock as soon as the parts needed to build them are available again on the world market.

    • @ChristosNikolis
      @ChristosNikolis Před 2 lety

      @@PortablismGear You guys rock for replying so quickly, danke schon! Perfectly understandable - I’ll be happy to buy the item from you, when it’s there. Cheers for offering an email notification option too, for when it’s restocked. Guten Tag!

  • @rodnogueira
    @rodnogueira Před 3 lety +1

    Does this work with the old PT-01 USB?

    • @PortablismGear
      @PortablismGear  Před 3 lety +1

      Thanks for asking. It will also work with the PT01 USB.

  • @fedobeatz
    @fedobeatz Před 3 lety

    Hi, was ist wenn ich vorher den Jesse Dean Pre Amp drin hatte wo man Capacitor C8 und C18 auslöten musste und an dessen Stelle ein Output Kabel anlöten musste ? Geht das dann trotzdem mit eurem RIAA Pre Amp. Bitte um schnelle Antwort, PT ist gerade offen und ich wollte euren Pre Amp gerade einbauen (kam eben mit der Post)
    LG, Fedo

    • @fedobeatz
      @fedobeatz Před 3 lety

      Gerade ausprobiert, scheint nicht zu funktionieren nachdem der C8 und C18 Capacitor entfernt wurde ?

    • @PortablismGear
      @PortablismGear  Před 3 lety

      Hi Fedo, jegliche Modifikationen im Sound-Bereich des Mainboards kann zu Problemen mit diesem Mod führen. Es ist wichtig, dass die Elemente originalgetreu auf der Hauptplatine vorhanden sind, auch C8 und C18.

  • @carstenolesen3115
    @carstenolesen3115 Před 3 lety +1

    How is this pre amp different than previous pre amp ?

    • @PortablismGear
      @PortablismGear  Před 3 lety +1

      The stock version of the PT01 Scratch does not have a pre amp to use an aftermarket tone arm with magnetic cartridge.

    • @carstenolesen3115
      @carstenolesen3115 Před 3 lety +1

      @@PortablismGear I know. I already have a pre amp with my Jesse Dean tonearm since 2 years. So my question should be. How is the new pre amp different form the one witch came with Jesse Dean tonearm kit ? Cheers.

    • @PortablismGear
      @PortablismGear  Před 3 lety +2

      @@carstenolesen3115 if you should have the first generation of the JD pre amp than a RIAA phono pre amp is better. You can email us a picture of your pre amp. We will tell you then if it is the old one or not.