How I Repaired My Sanitizer Spray Bottle & Fixed it Twice !!

This is made inspired from the short video • Sanitizer | Spray Bott...
Recorded by : / @lovaharsha5080
Thumbnail: Used A.I. based image processing tool to convert real world image into cartoon.
0:00 Taking apart the bottle
0:14 Removing the Nozzle Cap
0:55 Opening the Bottle
1:10 Dismantling the Nozzle Assemble
1:45 Sperical Ball inside the pump setup !
1:57 The Nozzle Parts
2:32 All Parts of the Bottle
3:00 Replace, Clean the parts.
3:05 Joining all of the Parts
3:10 Nozzle Parts Assemble
3:33 Pump Parts Assemble
3:45 Inserting the Nozzle into Pumping Part
3:55 Joining the Nozzle with pipe.
4:10 Inserting the Internal Assemble into bottle Neck Cap
4:35 Closing the Bottle
4:50 Fitting the Nozzle Cap on to Nozzle
5:00 Testing the Spray Bottle
5:20 Success Party
Recently my sanitizer bottle stopped working as it fell down.
I opened up to fix it...
I found there is a small spherical ball inside the mechanism which is crucial for the spray to get worked.
That spherical ball has a spring on it and due to fall impact, that spring contact got lost..
so I had to open the mechanism entirely and carefully place the spring on that spherical ball.
check out how the spray assembly works.

[@adeley27]

Just put a needle through the hole where the little bead was. That is the end where the straw was attached. Test it out and see if it is started spraying. I did it and it worked out for me. Did not have to open the when thing. Thank you for the video 😊

[@ice._.gyal.]

Thank you so much... this way was so much easier and less complicated.

[@stoppablepham6334]

I tried this just now and it works for me too, thanks for the tip!

[@parul_s_panchal1553]

@Ad k it worked for me thanks for the tip 😊😊

[@yamunas609]

It worked for me too! thanks

[@allegrifan4933]

it works, thanks so much!!

[@amypola5903]

Seeing how the mechanism works was helpful. I can't take mine apart, the can is pressurized, and now I know the hollow tube that's broken on the outside, can't be pulled out from the outside and replaced. So I'm gonna have to Macgyver something to make it spray again. The can is 3/4 full!

[@Ken_710]

THANKS A LOT MAN!
I WAS STRUGGLING WITH THE NOZZLE SETUP.
I HAVE NEVER FOUND A CZcams VIDEO THIS HELPFUL THIS WHOLE WEEK.

[@djoy4ly]

Thank you for the very helpful video! I fixed the spray nozzle on my GLASS bottle! Yay!!!

[@bjthomas66]

I had never noticed the tiny ball! It was stuck, and even hot water didn't release it. But a shot of WD40 worked! Thank you for this video!

[@adeley27]

Thank you, because your comment I decided to stick a needle to loosen up the little bead, and it worked.

[@shinygracesanamandra2681]

The pipe is falling into the bottle when i pump it it doesn't stay in place should i stick it with feviquick or what should I do please tell me

[@pishhh]

Can u pls tell me how to remove tht main part ..its so hard :(

[@adititiwari8274]

Can you tell what to do if that little black circle is missing?
What do we call it?

[@pammclennan1642]

Thank you so much for this information. I didn't know you could take the whole nozzle apart and put it back together as you did. Very helpful.

[@BabjiEManohar]

Glad I could help!

[@Tk_s_CHANNEL]

i cant fix that bottom to that pipe i triad so mamy times what i can do now??

[@jagritiverma9880]

The thing is i m unable to attach the pipe part in the main cap its so hard😐😢

[@sijokxavier]

Wow. Kudos. I just was doing 1 step wrong again and again. Anyways thanks a ton. Superb

[@shalugupta1432]

I am unable to remove the spring, what can I do?

[@FreyaRuizables]

So which part gets broken?

[@hariharangopu513]

My friend, Mr. Raghavendra (Handsome guy) got an same issue. We saw your video luckily and we did dismantle and assembled all parts. Respect 100%. Mission passed 100%. LOL..Its working fine now..

[@hariharangopu513]

Thanks for Raghav hard work and love towards CZcams. 😍

[@mohammedsaleem6264]

Thankyou soooo much ❤️❤️❤️❤️❤️ i cried when i broke my mom's bottle but now she is not angry ❤️❤️❤️❤️

[@motivationaltech4540]

I fix my shoe spry bottel with the help of your instructions....
Thank u

[@BabjiEManohar]

That's great!

[@ankitakhurana9090]

I was about to throw away 2 bottles as the pump was not working, then found this video and yippee it worked.
It's such a helpful video 👍👍

[@ashoksamurai6409]

It's working. Thanks much.

[@genniegidney]

My spray nozzle won’t spray. The mechanism is fine. I have another spray bottle I took the first cap off (it doesn’t fit the top but it allowed me to test. It’s just the cap part that’s clogged. I’m soaking in hot water. Idk how to get it to work. I’m trying but it’s like it’s stuck.

[@nimishatsuni4797]

Njn nannakiyappol work aavunilaa mukalilea topin endho prshnm vere top ittapo ready aayi

[@dreamergirl4386]

Can i re use sanitizer bottle to fill my homemade serum is it safe

[@joanna5200]

I didn't even have to take it apart to your extent and it worked like a dream again. Thank you so much ❤️🙏

[@loananzouakou4673]

how would you take it apart?

[@joanna5200]

@@loananzouakou4673 if you watch the whole video, she did show how x

[@eggheadtwoSCM]

We got the exact same bottle this will 100% work

[@Pizza_eater001]

So glad that u made this video
Saved my day

[@dianegraves339]

Thank you for this video. My bottle got knocked off of the counter and landed right on the nozzle without the cap on, and it wouldn’t work. It saved me from having to buy another product when this bottle was already full.

[@shivaniverma4266]

This is insane I just lost that specifically shape transparent ball and find it and fixed that bottle thanx for uploading videos

[@BabjiEManohar]

Glad it's helping

[@farminglovers7866]

I also lost the small ball

[@sapnasingh1217]

i am not able to remove the parts

[@hamsapriya6933]

Thank you so much for this lovely hack! I couldn't remove the pump system but tried blowing on either ends of the pump assuming an air blockage and hola it worked! Thank you thank you thank you so much and thank God for everything!! 😊👍🏼

[@pranavagnihotri7030]

Thanks for the information,maza a gaya bro, ab new bottle kharidna nahi padegi❤🎉

[@geraldaguirre2025]

Ano po remedyo pag wla yung panang bola na tranparent.????

[@shaymovieslol2748]

WOW! THIS WORKS, I THOUGHT I HAD TO BUY A NEW ONE BUT KNOWING ME I’D FIND A WAY TO FIX IT. IT SPRAYS MORE MIST NOW! I’M LIKING THIS VIDEO!

[@gaming30378]

Bt wht if it again don't work ??

[@janelle2591]

How to fix my spray bottle that gives out big drops instead of really small ones? I lost the small part that make the drops small. Please answer if you know what i mean

[@charanxgamer5239]

How did I open the machanism

[@skullgammer6720]

Bhai thank you mummy ki chapal se bacha liyaa yrr bhai love you se tane❤️👍🏻

[@andymandy1975]

Bhai nozzle nikal hi nahi raha 😰😢😖😖

[@versatile581]

I am unable to remove nozzle

[@sathikutty5071]

It's sanitizer bottle nozzle Is joined type? What I do?

[@madhubabu4165]

I dint find any boll inside. After fixing as u said its not working still.

[@aparnaarpitadash9716]

I didn't remove the mechanical part please help me

[@akrvlr3341]

My dabur gulabari face cleanser is not working wat should I do

[@mythily8103]

Really awesome video.. I never notice the tiny ball. When spray bottle stuck I removed all parts of spray bottle but I didn't notice the tiny ball.. I think I have lossed it..after fix all parts without tiny ball it's didn't spray..after saw ur video I noticed tiny ball is missing now I fix using another tiny ball in spray bottle now it's spraying.. Thank you for sharing this video

[@nusratvlog7975]

i just done it today....and it’s work....thanks

[@jmsshihab4731]

Where I find
the bottle

[@hazelboyce7230]

My two nozzles does not have in that little ball and they won’t work at all. Liquid is being pulled up but it isn’t getting to the actual nozzle to spray out. Nice video though, it is the only one that gave me hope.😂

[@Thecutegirliee]

Same did it work in the end for you

[@subhisharma2324]

Mere spherical ball kho gaye what I can use kiya koi moti

[@akankshapal6107]

Jo part sbse upr h usme holl hi nhi hai usse kse fix kru

[@sabakhanbareillvi5626]

I m trying to remove the nozzle but it is not coming out 😰

[@allthingsinone9296]

What is inside the cap or nozzle
Mine is lost

[@harshitmodgil9609]

Thankyou sir
It's working

[@BabjiEManohar]

*Try to repair yourself first* , before buying new. It's plastic. Reuse. Save environment.
*Yes, removing nozzle is hard.* Removing it went off the camera frame. Use a plier.
Share & Save someone's life ❤️ only if you find it helpful.
Clearly, some of you facing hard time removing the nozzle. Please be careful with this part because if you remove it harshly, there could be a transparent Spherical Ball drops off the nozzle assembly.
If you lost the spherical ball, try any tiny round piece of pebble or ball bearings of more or less same size.

[@a.praneetha1501]

Thank you so much

[@alekhyaprabhala3984]

Make that missing part

[@jhunusahu8061]

If the ball is Missing then what to do pls make a video

[@b06cristobalchristianp.56]

Yes, I'm having a hard time on removing the nozzle and til now, I'm still there AHAHAHAHAHHA

[@aparnaarpitadash9716]

@@b06cristobalchristianp.56 Same

[@sh_ri_ni_th_i.]

Wow most wanted video thanks

[@sanjana8716]

Thankuhh somch ❤️ this video is very helpful 😉

[@Alex-vl4gu]

Thanks for helping

[@Rahulsharma0421]

Thankyou it's really work for me

[@BabjiEManohar]

Glad to hear that

[@clairenime]

Will definitely try after school my conditioning bottle suddenly stopped spraying

[@hritikgautam5126]

Bhai spray toh nikal raha h par andar se sanitizer bhi bahar aa raha h cap se please help, reply asap

[@joealfonso4735]

It works ..thanks

[@GeorgeTheIndianFarmer]

You have made a simple but useful Video on the subject. Also I like the animation as well. Good job. Keep it up.

[@BabjiEManohar]

Thank You 🙂

[@mayarmaya4891]

Its so hard to remove the pump part guys can you help me , ?! How i can remove it!!

[@kuleshwarsahu]

Thank you so much
Helped me a lot

[@opotumon]

Superb. Thank you so much.

[@karuneshbaranwal]

Thanks
Edit: You are awesome.

[@ayanprince4338]

Thanks brother...
It works

[@benjaminluya5179]

I don't remove nozzle why

[@khanmuskan6852]

I am unable to remove my nozzle what to do ❓❔

[@govindarao37]

Good it's very useful

[@reshmivishwanath5244]

@Manohar plz help me
I cannot remove the nozzle .please tell how to do it

[@andymandy1975]

Same even I'm unable to remove the nozzle

[@priyankaagrwal249]

Even I am unable to remove the nozzle...even in video it was skipped

[@priyankaagrwal249]

I wonder if comments are or not genuine

[@swati5913]

What if you lost that small spherical ball

[@rahulppazhani4601]

Yes... It works... Thankyou

[@MohammedHisham737]

How the hell do I remove the set 😖 I even tried to get it out with a cutting pair 😩 still that was stuck tho. Plss help

[@vaishalimundhe1035]

Same with me

[@xsunliqhther5529]

Hi how do you clean a spray bottle that have perfume on it, i cleaned it alot of times so my budgie would take a bath, but im scared that theres still perfume smell and i dont want them to die

[@BabjiEManohar]

I have no idea.

[@amanmehar05]

Thank you very much bro ❤🤩

[@rajalaxmidash2605]

How to removing the set up

[@Bat_Womenowo]

4:10 how to insert it my is not inserting plzz reply 😭😭😭

[@adansisters8396]

This was so easy and help full thanks

[@YuunAya]

I was very happy I could find a tutorial like this! But unfortunately, it didn't work :( even using a plier I couldn't remove the nozzle... I'm definitely substituting my spray

[@shaik119]

Same

[@anandhukrishna7405]

White sheet is not properly seating and when I press the whole fall down to the bottle 😫😥

[@VVS_Craftworks]

Thank you so much🤝

[@aashishyadav5812]

I tried it's really working 😊

[@alekhyaprabhala3984]

Inside press how to open not shown

[@PuriBabaPunjabi]

Very nice 👌👌 helped alot

[@jumpinpool]

How to remove 1:38 ??

[@ArpitSingh-lk1ni]

Pipe on 4.22 is not stucking inside that how to stuch that please tell me

[@ArpitSingh-lk1ni]

Please telll me

[@t2tmedia933]

thnx it helped me a lot

[@shabanabegum8092]

Ya it's work thank you 👍

[@karla2helpyou]

So....i dont have the clear ball. Do I have to find a replacement or what can I do?

[@BabjiEManohar]

Some spray mechanism needs it. If you lost it, try tiny round ball bearing

[@meghanamahawar7813]

My spray bottle is not working help me

[@ksanjana5377]

What if the spherical ball is missing van we fix it without the spherical ball pls reply

[@ankitkhandelwal426]

Mene apni same bottle ulti kari, thodi der tak nozzle ko daba k rakha, uska air nikal gaya, fir button dabay dabay bottle ko seedha kia fir jaldi jaldi nozzle dabaya 2 4 baar to pressure ban gaya and sab thik ho gaya

[@afraanoufshaik3297]

Can u show me how to do pumping mechanism

[@namitaagrahari9485]

I tried plier everything, nozzle doesn't come off😭😭😭

[@rolexcreations6753]

Thanks bro ❤

[@archana1796]

Can't remove the set

[@harshvarshney5278]

Thanks it works

[@vivekjasrotia7247]

Wonderful, I did nothing jut remove the parts and cleaned it and it works .Thank you so much..

[@Tamil_Status_Edit]

Thanks you its working

[@kaushiknaik4872]

Ahh 3:00 AM content 🙂

[@uditpandey806]

thank you so much ❤

[@tinkerbell5427]

how to fix Makeup fixer bottle please make a video on it

[@rizwanatyagi9964]

Thank you fir this video

[@Anbesivam111]

Thanks dude it helped me...👍👍👍

[@BabjiEManohar]

Glad it helped