Replicating Kennedy's Lincoln Hubcaps
Vložit
- čas přidán 29. 01. 2024
- PCBway 3D printing service: pcbway.com/g/S2UI8N
Never miss a video! Enable '🔔' All Notifications!
Duplication 1956 Lincoln Premier center hubs, making a silicone mold and then resin casting clear parts
Alfred Backpack hangers: botzen.com
Bambu Carbon X1 3D printer: tinyurl.com/35bn9v3y
FormLabs $500 machine 3D printer discount: shorturl.at/eluvS
BJB materials: bjbmaterials.com
3M 51056 Purple polish: amzn.to/3hp878w
Naphtha: amzn.to/46nruEQ
Petroleum Jelly: amzn.to/3QKeROv
Dewalt cordless drill: amzn.to/47Fhvfb
Vibration Unit: amzn.to/3R6E475
Vacuum chamber and pump: amzn.to/47DslCC
5 Gal pressure tank: amzn.to/46gx4cc
10 Gal silent compressor: amzn.to/3sIVZHO
Quart mixing cups: amzn.to/47CG902
Tongue depressor mixing sticks: amzn.to/47EM8S5
Black dragon latex gloves: amzn.to/47lvSWf
As an Amazon, Formlabs, Bambu, Creality, Blick Associate I earn from qualifying purchases.
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
Panasonic LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Manfrotto 244 Variable Friction Magic Arm: amzn.to/2X7YwIT
Manfrotto 035RL Super Clamp: amzn.to/3dbPWyf
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple Mac Studio: amzn.to/3sQ0kJ0
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro amzn.to/3PAFi7t
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
Music: end credits Rurlyok
rurlyok.bandcamp.com
Contact me through www.botzen.com for design work,
Follow me on:
BlueSky: at botzendesign.bsky.social
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign @botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com - Jak na to + styl
Eric, thank you for showing the process so well. Your subscribers are very lucky to have your knowledge on display. You take tricky molds and parts and break down the process so that viewers can understand and follow. The parts turned out great. 🙌😎
Thanks, and thanks for making some great products. I love how thin the w85DL clear resin is and the working time is fantastic.
@@EricStrebel you are taking advantage of that long working time, and the magic is how quickly it will cure and demold with mild heat (100F/38C) applied. That was all by design with these WC-85D products.
Great video, Eric. I always learn something here. Can you please do a video showing how you finish the parts (i.e. painting the backside)?
Amazing finish on that final product
Learning so much each time, thanks
Cool project!
Great project and informational video, thank you.
Amazing and great job, very nice. 😍
Greetings from France
Always great videos
Great video! I´m not sure I understand the key seal. Why do you have it as a separate TPU part instead of just having the ring as a feature on the grey part you printed?
Eh, that's how I used to do it, now I just make it part of the splitter board
I always get impressed by the quality of your work. Have you made any transluscent part (like a headlight, for example) that do not get yellowish and cloudy with time, because UV light? Cheers from Brazil
But quality resin that is UV stable, that should keep them from yellowing
@@EricStrebel , Thank you
Nice Video, I‘m always fascinated of the split-Mole-technique.
I wonder, as you said the material is pretty soft, is it necessary to put reinforcement into one of the halves at a given distance that will be bridged by one of the halves? I could imagine, that if the material is to soft it will sag in the middle and the part could end up too thin.
I never worked with silicone, this is just a feeling I get when I see how soft and flexible the silicone mould halves can be handled.
What would recomend for a cap material that was originally a PPE/PO material which has a little flexability to it. The flex is to allow the cap location fingers to flex as the lock into the wheel.
Use a slight softer urethane, perhaps a shore 60D
Can I ask if there's any real difference between a pressure tank for paint and a regular pressure tank for casting. From their stats they both seem to hold around 5 bar pressure, but the difference in price is ridiculous.
The pressure tank that I use is a converted paint pressure pot.
Hi,
Just found your channel. I have a 1988 Toyota fj62 Land cruiser. The center dash bezel is cracked and brittle. What type of resin would be best to use to cast new one? have never tried molding anything before ....
I saw the video description and legitimately thought you were making hubs that were 56 feet in diameter.
Then I realized you meant the year 1956, or ‘56.
Ha, my bad, I will edit that
is it possible for you to do a video on doing a 2 part mold of a Tarantula ornament I love your work
Hi Eric, nice video as usual. I'm in the process of building a pressure tank, heavily influenced by your work. I can see that your reworked hinge starts to collapse. Is that a design issue or something else?
Eh, both. But it still works, I have extra bushings, so when they wear out I can replace them
Hello Eric!
Do you have a casting resin you could recommend to me, as a beginning hobbyist, for creating some headlight lenses?
Something that would be UV stable, decently durable, and stay clear after time?
They will be attached to some custom 3d printed headlight housings , which will house some LED projectors and finally mount up to a custom fiberglass and carbon fiber front end i am crafting.
Thanks for any tips!
❤
Use the stuff I am using from BJB, I would stay away from any smooth on products. They have very good support as well
@EricStrebel Thanks Eric, I will do that ! Already researching their products!!
If you are in Europe like I'm, it's hard to get a hold of the BJB WC-85DM. I set my eyes on the Sika SikaBiresin PX523. I will post video about duplicating headlights in few weeks on my channel.
Hey!
How much was that for a client?
Молодцом!
Could also make custom pinball table inserts this way
trimming the soft materials with xacto is much easier when the mold is laying flat on the surface (in this case its side) and you guide the cut with hand stabilized by cutting mat. Cutting things in thin air rarely gives nice effects.
Yes unfortunately one side of the mold the silicone is just way too soft.
X C L L N T 👏
The backpack hanger should have long holes for adjustment after mounting.
Horizontal or vertical? Why? Just an opportunity for it to move once mounted....
@@EricStrebel one each would be the optimum. It's harder to mount straight. Who has perfect holes ... especially when drilling / ankering into hollow brick.
@philipp594 ahhh, ok. Good point, I will consider it for v2
You can also make this mold with just a single silicone mold. This would save you at least two thirds of your working time. The result will be just as better and even more beautiful. Unfortunately, for professional reasons, I'm not allowed to reveal how this works!
Professional reasons, lol. Please....get real. Total bullshit of course. You might save some time, but you won't get a consistent quality split line. Plus I am replicating a manufacturing process to help me understand that and to help preserve old school techniques.