Auto glass milwaukee multi tool . Windshield Cut Out Tool
Vložit
- čas přidán 7. 07. 2017
- =====================================
Milwaukee multi tool
Buy it here
amzn.to/2AdZozH
=====================================
auto glass milwaukee multi tool .Windshield Cut Out Tool . Works great with Standard auto glass blade from Equalizer . 5200
Its Great Try it Won't cost you much .
#autoglass #windshieldreplacement #autoglassproducts #autoglasstools #windshieldcutout - Auta a dopravní prostředky
I’m sold on the multi tool now thanks!!
молодец,шикарно работаешь!
Never seen YT video that contains so much information on a super rare details on proper part numbers for washers and other misc. The parts needed along withe modifications to make to the sealing communion on generalizing the low but stable meeting, VERY informative video my dad woulds love the videos You post. I already liked, subscribed and shared your videos. Thank you for posting and education . I can I large window ever be repaired and then reinstated? F there was one major removal l tool, to remove the front windshield that had a large window like in it like a 2006 jeep grand Cherokee what tool would you recommend? What brand of glass would you use? OEM third party? Thank you again your videos are very entertaining and very easy to understand.
I think the ZipKnife is the best.
Had to use 3/4 blade and it is long enough, now can't keep the blade from turning as I start to cut. So now going to get the abd washer, hopefully that will hold blade in place as I cut.
How well does it work when a windshield does not have a molding does it scratch the body
привет! подскажи, знаком с инструмент для автостекла FEIN? стоит его покупать??!!!!
Milwaukee Hackzall m12 spade bit could it be used to remove the back windshield? What tool do you recommend?
FYI oscillating multitool "universal adapters" are available from several manufacturers for less then $10. They may center the blade you are using better and hold it down tighter then that fender washer you are using (assuming that the blade you're using is actually meant to be mounted on an oscillating tool in the first place). I have tried the Bosch and Dremel adapters and they both work well. More recently, attachment manufacturers began offering their blades and accessories with an integral "universal" fit.
Do you know where I can get an adapter to work with these specific blades, as I don't see any for sale. I would prefer a proper adapter, but if not I will just use a washer like in the video.
@@VeganDog I'm trying to fin an adaper as well.
Si tú sabes donde venden Los adaptadores, pon un link donde comprarlos, porque es muy fácil dar una crítica y la verdad ignoras el tema.
@@VeganDog da un link donde vendan los adaptadores porque según tu esta mal con una arandela, pero ignoras el tema.
Can you cut a good windshield out without or you just use it to cut the bad windshield
Donde compras la herramienta mi amigo
What was the replacement shaft you used to replace the one that came with it
He never said he swapped the shaft....he clearly mentioned adding a washer to compensate for the difference between the the opening of the equalizer blade and the bolt that tightens the blade.
ЛАЙК ОТ ДРУЗЕЙ ИЗ МОСКВЫ 👍👌👍
This guy loves putting washers on his tools...lol
An old man told me once. If it works it ain’t stupid
Got the Equalizer 5200 blades and put on Milwaukee multi tool, tried cutting out glass and the blades are too short need longer L shape blades to work on this one.
I didn't understand the part about your multi purpose attachment broke and urethane fix, do you urethane an unbroken attachment too?
mad2315d multi purpose attachment broke in 3 three pieces. I used little bit of urethane and glued it down to the tool. Now its there held with urethane but can't be removed.
I switched to Dewalt for a multitool after my second Milwaukee multitool crapped out because the battery vibrates too much until the contacts are shredded. I'm a Milwaukee tool guy, otherwise. I noticed that you have your battery connection taped too. LOL
yeah it doesn't stay in place .
Dewalt's multitool is one tool that I would never be without. I work in the mechanical trades. i.e. electrical, plumbing, etc. Best wishes in your business.
Hey can we use Dewalt XR 20v for this ?
Is the washer a ABD OR AVD?
I have the multitool. I purchased the 5200 blades from equalizer but they do not fit. Does anyone know what adapter I need for the milwaukee or aftermarket one. Thanks
Where did you buy those blades
Can you use a regular cold knife blade with this? My blades don't have that night loop like your blade just a small hole
You can find blades equalizer tools website
@@NEWAutoGlass which milti tool is that..I want to make sure I get the right one thanks
did you crack the windshield
Профессионально!!! А фуры-камионы-TIR ,Шамиль миняете ?
How does that tool work under a heavy load if you got into a tight spot maybe like a newer dodge slider
Henry P Crawford it makes a job a lot easier but have to start with shirt blade or it will brake the blade
How many jobs can you use that on before it goes dead . it looks a lot easier than cold knife
if you get battery xc6.0 it lasts long time but i don't use it every day
Get rid of the music and let's see the damn tool work lol
What speed setting do you use the Milwaukee tool on? My Milwaukee has 0-12 speed setting , what is best for cutting windshields out? I want to get a windscreen from a scrap yard, so don't want to break it when cutting it out. What speed setting is best?
It takes time and practice to cut glass out without breaking.
I understand that, but I just wanted to know what speed setting you use?
All depends on you
🤣😂🤣😂
Cold knife all day long!!!!!
Good luck on the VW's with that cold knife
Reid is the best for me. The push button helps on deep side wells where this tool here looks like itcwould butcher them. Plus the windshield hes working on takes me 3 minutes or less on a hot Texas day with my Reid. Good video though.
@@skylermitchell4901 I'm not in the business anymore (after 25 years) but I cut out plenty of VW windshields with a cold knife.
What the bolt size???
Hey I looked at the equalizer website the 5200 and I couldn't find the blade should I just buy the starter pack of blades 99 bucks?
Part number is 52000. This is for all 3 sizes if I'm not mistaken.
What's the equalizer blade part #? Thanks!
5200 comes with 4 different blades
Where do u get the blades from?
Nice video, but you need to make more detailed and well-explained video showing how to use the tool and other important tools as well.
What about scratching?...do you have to use a lot of primer...
Lamar Myart I do use primer. But this is just like cold knife but with out struggle. Takes time to get used to. Few tries
NJ New Auto Glass the company i work for wont allow power tools..but if i ever get the balls to go on my own this seems like a great tool
this is not every day tool but very useful when you use it
His he cut the bottom out ?
What part of nj you from ? North?
Why not just a cold knife blade?you can convert the fien multimaster to accept those blades with a 99 cent adapter and save 900 dollars.thanks for the video.
What adapter did you use?
Save 900$? This tool is 99$. Just picked one up the other day
I found that the m12 multitool vibrates way too much doesnt have a light. M18 multitool is much smoother operating and is the same price
18 little heavier than 12. I prefer 12
Links?
الله
Where did you get the blade at that I want to know
Not sure if you figured it out yet but he said that he ordered them from equalizer and gave the part number. Just go to their webpage and order they'll ship them to you.
Part number 5200
After 20 years in the glass buisness I tried one for a couple of days after spending almost $900 on one , vibration is a huge problem , inexperienced glass guys can do a lot of damage if they are not careful , and a sharp cold knife works faster and cheaper , it's in the garage if anyone wants to buy it ? . Haven't used it since.
😆
Yes this looks like trouble... especially on a new vehicle.
I just found out about the zip knife....it's slightly better than the pull knifes...the outcome is the same...all boils down to preference really.
I'm a fan of the 2 pull knife set up...but have gotten use to the quick release on the zip knife so it seems more convenient to me to use only the zip and change between blades as I go.
@@xdeadwrongxdeadwrong7181 I like the zip knifes just started using one , must say after 20 years in this business starting to have problems with my tendons in my elbows , trying not to use the power tools as much as I used to..
WHEN BUYING THIS TOOL DOES IT COME WITH BATTERY AND CHARGER FOR FREE
?
Usually Milwaukee tools don't come with the batteries
اناعملت زىه
What is the Milwaukee tool model number??
amzn.to/2AdZozH
Harbor freight has that tool for a fraction of the cost.
Harbor freight have cheap tools that wont last
wow those birds in the background so anoying
well that was a waist of 4 minutes of my time thought i was gonna get to see it cutting guess not
You stopped watching the video too soon. He does use it
Do not buy that multitool. The older multitools from mill-whacky SUCK...
M12 is for the kids lol
Bad camera man too far away