Why are you scared of air compressors this is much more scary than a air compressor @800psi if this tank would rupture you would be dead instantly it is like carrying a pipe bomb in your hand
thanks for these videos they have been a big help to understanding pneumatic systems! Im looking to use a CO2 tank to a cylinder with a quick release valve... would i need to put to quick release values at both ends of the cylinder or would i need to do something different?
Hpa would work better it is cheeper at about $4 for a large paintball tank and there is much more in a tank they are about pressurized to about 3000-4500psi
Would you have a recommendation for someone looking for a cylinder to shoot the rod out as hard as possible creating a "shock impulse" into an adjacent fixture with test article?
Hi. Im trying to build something similar and am using a 250 bar dive bottle. Could you point me in the right direction for the regulator to use please. Thanks mark
Hi can you help me. I want to install this to open a driveway gate. Would this be suitable for the application? It won't be used daily. But I imagine it will need to be bigger rams, however would the psi have to increase? 30psi is 30psi on any cylinder is it not?
Thank you so much how i can calculate maximum speed of pneumatic cylinder and what is the minimum time of controlling the solenoid valve if can help me please
Yes, you can. I’ve done this. Just need the adapter and the correct regulator. Pretty the exact same set up as this, just with the adapter for the co2 cartridges. Or you can take apart a paintball gun and take what you need to make it work.
Hello, i want to ask, if i use this tank to let say, make a lift under a seat of a motorcycle. the idea is to lift the seat with a person on it. do you think its possible with its capacity?. if so, how many times do you expected that it can actually tilt the seat with a person on it?. and can you suggest an actuator that can withstand the weight?. thank you in advance.
hi sir ,good sharing , wanna ask how to control the height of the piston ? as we know, pneumatic piston will rise up according to their elongation even we set the low pressure
Thank you so much for this genius solution, I was searching for an air pump with fixed budget.
All I need now is to get one of these CO2 mini tanks.
I had no idea such a thing existed. I've always been afraid of air compressors, but this is a perfect solution. Thanks!
Why are you scared of air compressors this is much more scary than a air compressor @800psi if this tank would rupture you would be dead instantly it is like carrying a pipe bomb in your hand
would love to see this same test with hpa tank.
For maximum fun, use this in a small confined space with zero ventilation
Direct to the Dome also works
What product are you using for your pressure regulator? I need a pressure regulator that can screw directly onto a C02 tank and regulate to 100psi.
the actual reason you get more shots from CO2 is because you have a liquid/solid CO2slushy inside it, which has a higher density than a gas.
thanks for these videos they have been a big help to understanding pneumatic systems! Im looking to use a CO2 tank to a cylinder with a quick release valve... would i need to put to quick release values at both ends of the cylinder or would i need to do something different?
Hpa would work better it is cheeper at about $4 for a large paintball tank and there is much more in a tank they are about pressurized to about 3000-4500psi
Would you have a recommendation for someone looking for a cylinder to shoot the rod out as hard as possible creating a "shock impulse" into an adjacent fixture with test article?
I just bought a picoboo one and it’s perfect for what I am doing.
this is a very creative idea, I come from Indonesia, can you help me find a regulator where to buy?
Hi. Im trying to build something similar and am using a 250 bar dive bottle. Could you point me in the right direction for the regulator to use please. Thanks mark
where can you source a cylinder that works with co2?
May I know what type of solenoid valve is this?
2 Position 5 Way .
Have you considered using a scuba tank?
Can I ask how long is this cylinder?
If you provide repair service for the pneumatic system?
Hi can you help me. I want to install this to open a driveway gate. Would this be suitable for the application? It won't be used daily. But I imagine it will need to be bigger rams, however would the psi have to increase? 30psi is 30psi on any cylinder is it not?
Rahul pl chec the price of co2 tank and aDCMotor of. 5hp.
Can you use a mini air compressor like the one used to inflate heavy duty car tires in place of the co2 tank?
All depends on if it has a high enough psi and it's better to use a compressor that fills a separate air reservoir
Thank you so much
how i can calculate maximum speed of pneumatic cylinder and what is the minimum time of controlling the solenoid valve
if can help me please
The speed depends on the air pressure and the controlling of the solenoid depends on the switch
Could you use a small CO2 canister instead?
Yes, you can. I’ve done this. Just need the adapter and the correct regulator. Pretty the exact same set up as this, just with the adapter for the co2 cartridges. Or you can take apart a paintball gun and take what you need to make it work.
Where can I get this ?
Where can i find all of these at?
i dont get it -- where does the co2 go ? and when?
The solenoid valve has a air muffler that’s where the air comes out
Through the hose, through the solenoid valve and into the piston then out of the exhaust on solenoid
Sir how can we eliminate use of electricity.
I would consider a mobile battery solution for the picaboo.
Hello, i want to ask, if i use this tank to let say, make a lift under a seat of a motorcycle. the idea is to lift the seat with a person on it. do you think its possible with its capacity?. if so, how many times do you expected that it can actually tilt the seat with a person on it?. and can you suggest an actuator that can withstand the weight?. thank you in advance.
i think a dc linear actuater run off the batter might work better for your application
hi sir ,good sharing , wanna ask how to control the height of the piston ? as we know, pneumatic piston will rise up according to their elongation even we set the low pressure
Im here to get tips off from pneumatics for anamatronics
Too talk