How to Unlock Speed Limit | Ride1Up Cafe Cruiser
Vložit
- čas přidán 15. 06. 2022
- How to make your electric bike faster by removing the throttle speed limit on the Ride1Up Cafe Cruiser and 500 Series electric bike. This is for most eBike's using the Key-Disp KD21C LCD display. By default the ebike thumb throttle is limited to 20 mph (32 kph), but by following these instructions you can remove that speed limit and enjoy the bike's full speed potential, generally 28-30 mph, without having to pedal. I've also noticed that by changing this setting my bike feels like it has more torque and power to the pedal assist.
31 mph eBike for around $1000 (it moves!) ▶ amzn.to/3Q9c7vc
To make this change you need to access the Key-Disp's General Parameter Settings by holding both the Up and Down button for a couple of seconds. Then by clicking the Power button, you should access the Speed-limit Settings, labeled "LS". This controls when the speed is faster than the limit set, the ebike power will automatically cut off. The system range can be set from 7.5 mph (12 km/h) to 28 mph (45 km/h). Ride1Up has it set to 20 mph by default.
Most popular eBikes available: amzn.to/3HsDrhX
The display default password is 1212. By clicking the Up/Down buttons you can increase or decrease the speed limit setting, allowing your bike to go faster or slower with the thumb throttle. When done click on the Power button once to confirm your choice, then click and hold the Power button to exit the settings menu.
Best Selling eBike Accessories ▶ amzn.to/3Qq2kP8
Keep in mind the higher the setting, the easier it will be to go faster and use more battery power. I found that with the max speed setting being used, my battery life using throttle alone was reduced by 25-30%. Instead of going 20 miles on throttle, I was capable of going about 12-14 miles. Being the settings are pretty easy to do on the fly, you can always reduce or increase settings as needed during your trip. I found that removing the speed limit so I could go faster was nice for short commutes in the city when I wanted to keep pace easier with traffic.
How to use the Ride1Up Cafe Cruiser display:
The display can be switched on and off by holding the MODE button for 2 seconds. When parked for more than 10 minutes, the system will automatically turn off and has a leakage current of less than 1 uA. The display interface shows Running Speed and Total Distance, and pressing the MODE button allows the user to cycle through various information such as Trip Distance, Trip Time, Max Speed, Average Speed, Motor Power and Running Speed.
The push-assistance mode can be activated by holding the DOWN button, which will cause the eBike to move at a uniform speed of 6 Km/h, with "P" displayed on the screen. The push-assistance function is turned off when the DOWN button is released. It's important to note that the push-assistance function should only be used while pushing the eBike and that there is a danger of injury if the wheels of the eBike do not have ground contact while using this function.
The lighting on the eBike, including the display backlight and headlight, can be turned on by holding the UP button for 2 seconds. The lighting can be turned off by holding the UP button for 2 seconds again.
The assistance level on the eBike can be adjusted to indicate the output power of the motor. The default level is "1" and ranges from "0" to "5", with "0" being no power and "5" being the maximum power. To change the assistance level, press the UP or DOWN button to increase or decrease the level until the desired level is displayed on the interface.
The battery indicator on the eBike displays the capacity of the battery using five bars. When the battery is low, the battery frame will flash to indicate that it needs to be recharged immediately.
The trip distance clearance (TC) on the eBike can be cleared by pressing the UP or DOWN button to choose "Y" or "N". The default setting is "N". To save a changed setting, press the MODE button and then access backlight contrast settings.
The backlight contrast settings on the eBike can be modified by pressing the UP or DOWN button to increase or decrease the brightness level, which ranges from "1" (low) to "3" (high). The default setting is "1". To save a changed setting, press the MODE button and then access unit Conversion Settings.
The eBike's unit settings can be changed to kilometers or miles by pressing the UP or DOWN button to increase or decrease the value. The default setting is "2" which is kilometers. To save a changed setting, press the MODE button and then access trip distance clearance settings. To exit general settings, hold the MODE button for 2 seconds.
🔔 Subscribe For More Here: / afiremedia
► Popular Videos: bit.ly/AFire-Popular-Videos
► All Playlists: bit.ly/AFire-Playlists
All Rights Reserved © 2023 AFire Media | For content use connect with @afiremedia at afiremedia.com
#eBike #SpeedUnlock #CafeCruiser #Ride1Up #electricbike #afiremedia - Zábava
Thank you this made me fall in love with my cafe cruiser all over again! I actually seem to get just as good energy efficiency riding throttle only, though I don’t press it down the whole time I kind of pulse it, throttle for a few seconds and then coast for a moment then more throttle
Got mine coming in this Saturday 🤙 gunna have to give this a shot after a few miles. Thanks for the tip 👍
Hope it helped, thanks for watching and commenting!
THANK YOU SO MUCH YOUR THE ONLY VIDEO I COULD FIND ❤️
Glad it helped, thanks for watching!
thank you so much man, i go 60kmh on my pedal clipper, which uses the same display
I got my e-bike to 60 km/h with this setting thanks a lot 😂
merci beaucoup, très apprécié,,,🙂
I bought the Core 5 over the Velotric Discovery 1 specifically for this. I likely wont ever do over 15mph on my route but it's nice to not be restricted.
I find that 15 mph is about the best speed for battery life and riding distance. Thanks for watching!
How do we unlock the top speed limiter?
Is there a program manual available online somewhere?
Thanks bro a practical great video just the same👍
Interesting, I didn't realize it tops the throttle only to 26mph from the default of 20mph. Will have to give this a try on my way home!
It's actually closer to 28 mph, but the motor has a hard time reaching it on throttle alone.
is it the same method for the ride1up core 5?
What brand/model of mirror is that, looks really clean for my cafe cruiser. Thanks
I love that mirror - great visibility and style. You can find it on Amazon here amzn.to/3TOxvnN - hope it helps!
Cool guide. How much does this affect the range of the bike? I assume this means more power use and therefore means it burns through the battery faster? I’m generally going pretty long distance but would love to keep my speed up over range.
Going over 20 mph will definitely decrease your range ability with the battery. I've noticed if I do about 25 mph on average, I can get about 12 to 14 miles on throttle alone instead of 20. Thanks for watching!
I have a Aostirmotor fat tire e bike 48v 1500w 26" I got my speedometer stuck on PE cant get back to screen.. any ideas
my bike used to go 26mph and now it goes 10mph, i undid all of the settings , didnt work, and idk how to reset my bikes settings(i have ez breeze elite ebike) please help
What’s the Battery range after increase speed with throttle
So my bike doesn't indicate how full it is, it was three bars full while the display said it was full, do you know how to fix this?
What motor power / voltage is it?
Mine doesn't have buttons. There's a remote. Is it possible to do this?
Could someone post video on how to use cruise control? Thanks!
The Ride1Up Cafe Cruiser doesn't have cruise control unfortunately. Thanks for watching!
thx i chnaged it so mine can go over 30 miles and hour !!!!!
30mph using throttle?
How?
pedaling and throttle
I have a Volta VB 2 and is the same settings do you know? and thanks for the video 🙏🏽
I have the C961 display, and would this work for any display of this size.
Sorry, I'm not sure if it works beyond this display unit. I do have another e-bike (Gosen S5) that has a different display, but has the ability to adjust the speed limiter just like this one. The menu is a little different, but the functionality is the same. Makes me think that most of the display units should have this ability, but that's just my guess. Sorry couldn't be more help and thanks for watching!
I just bought this bike but it’s on back order. How are you liking it? Also thanks for the info!
I bought it in early May and have a little over 900 mi on it. Fantastic bike. Super comfortable to ride which makes long distance trips even more enjoyable. Thanks for watching!
My buddy just got one on back order and had it within 10 days of purchase
How to i change it to miles per hour
2023 heybike mars has a different controller. Someone please put up a new video
Some people are saying the Cafe even unlocked is limited to 20mph throttle only. I just order this bike thinking I could get 25mph on throttle after unlocking.
Will this work on the lmtd with the color display also?
it sould,
I put 40 but I can’t confirm it it goes back to my normal setting
Does anyone have trouble with the odometer resetting? My odometer resets every other day and I don't know what I'm doing wrong.
I have my aostirmotor speedometer lock on PE cant unlock it
hello, I have the European version and it is locked to 25k/h, you cannot change these parameters, is it possible to somehow unlock this display so that all functions are available? thank you in advance for your help
any luck?
@@mrswordf1sh unfortunately not :( I think you need to buy a new unlocked display, but if you somehow unlock it, please let me know
@@arekwilk-ih9vbme too…i cant unlock
I was messing with display dashboard, my problem is even if i pedal for like 5km the speedometer goes to like 50mph even im just like around 10km and it stops at motor stop when it reach 20km but the speedometer shows around 50km which is for me its a lie it never does that before
Sounds like either your speed sensor is malfunctioning or perhaps your wheel size might be set incorrectly? Could be a number of things unfortunately. Thanks for watching!
Thanks for the video. If anyone knows how to completely remove the limit let me know.
I don't believe there is a way to remove the limiter completely. For this particular bike at least, it wouldn't make much difference I don't think. The speed is really limited to the size of the motor... In this case 750 watts, which is usually topped out around 36 miles per hour. Once I figured that out, I've been on the hunt for a bike with a big motor (1500w or more) and a controller that will put out the juice, like a 72 volt 🙂 they get pretty expensive though. Thanks for watching and commenting!
@@AFireMedia As someone that mostly rides home builds, I have a 48v 14ah/22amp ebike that has a motor rated at 36v/750w and goes 30-32mph. This because motor ratings don't mean much.
Motors just churn out the power they are given until they fail doing it. Whatever speed you go is dependent on the winding of the motor/rpm as well as the bms of the battery. The wattage ratings of motors are mostly due to regulations but they do give you some sense of how much juice they are capable of handling before failing. They are typically capable of 2x the wattage they claim as long as you aren't going full throttle for 10min uphill. On flat roads and short climbs, most modern motors can easily handle sustained *peak* wattage output for extended periods of time.
One example of this is that the wattage of an ebike is battery voltage X amps. So a 48v 22amp controller has a peak output of 1056watts, motors do not limit this as they do not have the function to do so. Modern motors are made to safely hold this as long as you are the average commuter.
Hope this helps your future build.
disconnect black and red wire from under the seat
@@blastcspremiere You mean where the battery/controller compartment is? I'm not seeing anything under the seat. Unless you mean the battery cable lol
Will this work on other ride1up bikes like the core 5?
Yep, any e-bikes with this display.
Can't do this with my ebike
I wonder if it would the same for the 700?
It really comes down to the computer itself. If the bike uses the same Key-Disp computer, these settings will be available. Then it's just a matter of if the bike itself has the capabilities. Thanks for watching!
I have a aventon adventure v2, I tried to do this, I did not get the correct screen options, any help would be greatly appreciated, thanks
I wander if you change the wheel size in the settings if that will effect top speed?
Should work, trying it out tomorrow
no, it does not
@@tito2445 it should, you have to use something else to measure the speed though, as the display will no longer be accurate :p
It does. I changed my wheel size from 700c to 28 inch. Went from 25kmh to 31.5kmph
didnt work on mine, suntour hesc system
what you show is for the throttle how do you go to pedal assist ?
Go to assistance level settings.
Choose one of the 8 modes: 0-3, 1-3, 0-5, 1-5, 0-7, 1-7, 0-9, or 1-9.
The default mode is 0-5.
Press the UP/DOWN button to increase or decrease the selected mode until you reach your desired setting.
Press the MODE button to store the changed setting and access the PAS ratio settings page.
@@AFireMedia i dont know yet so mutch about it but i see you go to the second menu and at L5 at the screen you change the speed up and thats for throttle so i geus you can go to a other setting then L5 one way and change that speed to.
@@AFireMedia you maybe have a video where you show how you change the padel assist to whit the mini display ?
Can i do this on the lectric xpremium
It really depends on the computer display model. If it looks like the one in the video, then it should work. Thanks for watching!
Mine says 24.5 and you can't adjust it....
I have the same motor and display in my Core 5 and tried this hack. My setting was already at 45 so I bumped to 50 (max allowed) and saw no change in throttle limit (22mph). Just got my bike 2 weeks ago so maybe this doesn't work anymore.
I would guess there's another setting that's limiting your speed. As long as you have a 750 w motor on your e-bike, it should be capable of doing 28 mph.
@AFireMedia Cannot override the throttle limit of 20mph with the LS set at 50kph. This is actually the upper speed limit beyond which the motor will cut off in pedal assist mode. This is set by the factory to 45kph (27.9mph). The throttle cutoff limit must be another parameter that may require a password to access.
Hi. I need an e-bike under 1k$ that goes 28mph, so i don’t want 20mph and then i have to remove the speed limiter. Suggestion? Thanks
Ouxi v8 goes 50km/h
It's a little bit above your budget, but it's well worth the look... Check out the Gosen S5 > amzn.to/3OgHmU0. I own this bike as well and it really moves using the same unlock procedure as in this video. Thanks for watching!
I dont have the second menu😢 is there another way?
Not that I'm aware of unfortunately. Sorry couldn't be a more help! Thanks for watching
Does this technically void warranty?
Not that I'm aware of, and they would have to find out about it somehow. You can always program it back to its default setting. Thanks for watching!
No way
I have a edikani bike will this work ?
When I try to go to settings it says p3, I think it’s password locked. Can I bypass that?
You have to find what number is for the speed then get your kilometers as high as you can put them then hold the power button
Once you hit the top and bottom it will go into that and then you hit the power to go one hit it again it will go to 2:00 hit it again it will go to three and you should find kilometers bring them as high as you can
And if you can set the size of your tires don't set them the size of your tires set them as small as you can it will go better a little bit
@@bruzza2532 but it only stays in the P3 menu where I can change the 4 numbers but I can’t go to any other setting
Same controller here but this method opens the pedal assist limit to 45km/h. Throttle assist is still stuck at 32km/h, fix?
Не может быть.у меня блокировать никак разблокировать
You should have shown a picture of the bike your using for an example,People can still see even if they cant read
Nah, people can use google
It’s the cafe cruiser
Hi,who can send me password to change speed limit ebike, Model :L401EXB1? Please
Any luck
I tried on my core 5 it goes only up to 40
The one on my Core 5 goes up to 50, but throttle tops out at 24mph without load. Still trying to figure out.
I can't unlock the speed limit, why?
U can disconnect the wire in the control unit too mine is a single white wire yours may be a different colour but it's the only wire that's looped on the control unit
He is right. I have tried this way. Cut down the self loop wire.
What the password for the menu ?
If I'm not mistaken, it should be 1212. Hope it helps, thanks for watching!
1212 not working, whee ebike agon 😮
Trouble is it will only lead to tougher legislation and enforcement if too many people zoom around at 30 mph plus while riding like idiots.
I am honestly irritated if people ride at that speed in the city with people around. Take it off road somewhere and do that.
You mean like a car?
😂
what about people riding with just pedals and being able to go faster than 20mph and not being illegal ?
@@brownstonecustomcabinetry5309 facts 🤣