Mercedes-Benz C Class Front Brake Pad Replacement W204
Vložit
- čas přidán 27. 08. 2024
- In this video I will talk you through each step required to change a set of front brake pads on a Mercedes-Benz C Class (W204 Chassis) with 295mm Discs.
Please let me know if you have any questions in the comment section below.
You can really help the future success of my channel by clicking the link below to subscribe, it's free and I will greatly appreciate it!
www.youtube.co...
Support me on PATREON:
/ ryansworkshop
Tools Required:
13mm Spanner
17mm Spanner
G-Clamp or Caliper retractor
Wire Brush
Torque wrench with 13mm socket
Link for parts required:
Front pads for vehicle with AMG pack fitted:
ebay.us/3JQBoN
amzn.to/3NTvxl4
Safety disclaimer: Ryans workshop is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information.
The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury.
Ryans workshop strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
Thanks for this mate, very comprehensive, not paying garage fees on such a simple job this just clarifies a few things
Thank you Ryan. Very well explained and a very professional video.
Thank you, glad I could help
Thanks for the good tutorial!
Hey by the way, you forgot the wearing sensor! :)
Thanks, I didn't forget, I fitted the day after making the video as it hadn't arrived yet
Na minha opinião deve-se sempre sangrar o circuito antes de empurrar o pistão/êmbolo para trás. Isto para não fazer retornar o lixo que se junta no êmbolo até á unidade de controlo do ABS.
Estarei errado?
Hi did when you tightened the piston with the g clamp why didn’t you release it back ?
Just asking as I’m about to follow your video so any advice will help total newbie but giving it a go
You just remove the g clamp after pushing the piston back and fit the caliper back on the car with the new pads and pump the pedal a few times the seat everything correctly
You can really help the future success of my channel by clicking the link below to subscribe, it's free and I will greatly appreciate it!
czcams.com/users/RyansWorkshop
My front and rear pads did not come with springs for the corner of the pads to sit in. Bendix brake pads. Should I be worried I just changed pads and old pads had no springs in them either
They should have them really, to prevent wear on the calipers themselves
What is behind disk size?