Norwood sawmill pm14 in realtime
Vložit
- čas přidán 6. 09. 2024
- I've had a few people ask about seeing a video of the Norwood sawmill pm14 milling in realtime. Here is a spruce log being milled .
For speed, there are lots of variables involved. Width of wood, type of wood, species or hard wood or softwood, length of wood, newly sharpened or dull chain, how powerful saw is, etc. I'd say maybe a minute per slab? maybe a bit more... This is not meant to be fast, it's meant to make lumber or slabs where you can't get something like a band saw or circle mill or where you're just trying to make your own lumber for fun like I do on a small scale.
wood is #spruce
Mill is Norwood #PM14 from @Norwoodsawmills
Chainsaw is @stihl #ms661
Chain on the chainsaw is a ripping chain from @granberginternational
#ottawamilling #chainsawmilling #chainsaw #milling #mill #sawmill
Enjoyed the video. Thanks for linking me to it. The cut speed isn't much different from an Alaskan but you sure do save your back. Also eliminates the some times fussy initial first cut setup. Appreciate you.
Thanks!! I also have a couple Alaskan mills with bigger saw. The 881 with biggest bar at 64". I got this little mill to make dimensional lumber. It's a little easier than my granberg edging mill. Just having fun milling using different mills!!
I really like that saw mill. Thanks for sharing that link.
Norwood sawmill beautiful Fren 💪👍
Thats a right smart of fire wood you have in the background
That is pretty sweet, have a wonderful day.
Thanks! You too!
Nice cut
Thanks!! :)
Painoista päätellen nuorella miehellä virtaa.
Btw, what powerhead are you using? I could see a bit faster cut with a shorter bar pulling less chain.
Stihl ms661. That bar is 28". Recommended is 20" I think. It's just what I had !
Nice video
Thanks!! :)
good
Looks easier than snapping chalk lines and free cutting with a chainsaw.
Yes, much easier!! :)
Thats 1 way for a few boards, not worth going cheap having so much wiggle, pull, and high maintenance. A cheap bandsaw mill is way, way better and not much difference between costs just after 6 months use with time spent on maintenance and setup times. Spend the extra 1 to 2 k to avoid the nightmare.
You can't bring a bandsaw mill in the middle of of no where. That's what this mill was meant for. I understand what you're saying but this is for a different purpose.
Please give me the link where I can see more Norwood and see the prices too thank you very much
This is the Norwood Web site. norwoodsawmills.com/en-ca/products/portamill-pm14-chainsaw-sawmill?variant=45330464571713
Quebuen.travajo.ace.esa.motocierra.como.ago.paraconprar.una.Armando.Aleman
Про техніку безпеки не подумали, декілька раз міг відрізати руки і зробити собі харакірі
No one else is around. .am dthere is a guard for the recommend bar which I is ,20". I'm using a 28" bar so I took the guard off. I am also being careful. It would be very hard to cut yourself while your pushing from far away. But yes, accidents do happen
Está interesante el diseño del aserradero,el problema es que por grosor de la hoja fe la motosierrs,"come" mucha madera.
All chainsaw mils are like that. There is a lot of sawdust. This is made to bring in remote places.
@@ottawamilling In spanish,please...d'ont speak english.
Todas las motosierras son así. Hay mucho aserrín. Esto está hecho para traerlo a lugares remotos.
@@ottawamilling Correcto,tiene razón,lo que me gustaría saber si es fabricado profesionalmente,o si es artesanal,se ve muy bonito,creo que vale la pena tenerlo.
Fabricado profesionalmente por una empresa llamada Norwood Sawmils.
🤘🏽🎉
Comment trouver ça?
La compagnie qui a fais le moulin s'appelle Norwood Sawmills.
😅
😅😅😅😮😅😅😊😊😊😊😊😊
Слабовато, жесткости нет и очень медленно. Но хоть не в ручную.
I will be installing it on some square cants to make it more rigid. It's perfect for milling lumber in remote locations.