Video není dostupné.
Omlouváme se.
How to: Replace cabin air filter (Toyota Yaris/Vitz 2nd gen 2006-2011)
Vložit
- čas přidán 7. 08. 2024
- Changing the cabin air filter on a Toyota Yaris AKA Vitz AKA Belta 2nd gen (XP90, 2005-2013), AKA Daihatsu Charade (2011-13). Featured is a 2006 Vitz with right-hand drive. Breathe a bit easier with a cabin air filtered through a new filter with activated carbon .
Attn: The correct airflow direction is downward, not upward as I indicate in the video. I was feeling some backflow around the edges. If you're not sure, stick some tissue paper in the middle to check.
You will need:
* Hands and fingers
* New filter, try Amazon US: amzn.to/3q6mSjn | UK: amzn.to/3q6FrEd
(Using the above links will help support my channel and is appreciated!)
Attn: The correct airflow direction is downward, not upward as I indicate in the video. I was feeling some backflow around the edges. If you're not sure, stick some tissue paper in the middle to check.
Links from the desc for filters: Amazon US: amzn.to/3q6mSjn | UK: amzn.to/3q6FrEd
yes, i think though you feel wind hitting your hand from bottom, the air suction direction is downward. that's correct right? so filter should filter air which is downward towards the blower fan.
Very clear and helpful explaination. Thanks a lot! 😌
Will be doing this myself tomorrow, thanks for the video
Very helpful video. 👍
So if the air flow was in an upwards direction, why was the old filter covered in debris on the top ( filtered air) side ? Surely the air has been flowing downwards and the topside was catching the debris and the new filter has an ‘air Direction’ arrow and as this is not an orientation arrow it should have been pointed downwards, No?
Edit: Ok you're right, I was feeling some backflow and didn't stick my hand in far enough. Airflow is downward.
@@CraigsDIY
All horizontally mounted cabin air filters with the blower motor mounted below the filter will have downward air flow.
Muito obrigado
Toyota wants DIY owners to install it wrong so the cover arrow points up which is opposite the direction of air flow which is down. I have installed after market filters wrong before so I used a marker and indicated airflow down for the next replacement. It does matter. Airflow is noticeably reduced when the filter is backwards.
Hi, where is Ford?
Rusting in the garage!
In the junkyard 👌
You are actually wrong pal. Air flow goes from top to bottom. That is why all the debris in the filter is in the top. You have just instructed viewers to put it in the wrong way. Please delete or correct video.
Wait, same thing for my airflow with the exception that the debris was in the top
It's a little hard to explain but I think that they might have installed it backwards because the debris was under the filter
Exactly what a numpty
Delete video and film it again correctly, omg you just installed it upside down SMH 🤦🏽♂️
Dear friend, here is Lucy from [AZDOME Dashcam] which was founded in 2010. We want to collab with you. Are you interested?