Reader Mag lock Exit button and doorbell Kit Installation video | FPC Security Outdoor Keypad

Fpc Security Outdoor Keypad / Reader Mag lock Exit button and doorbell Kit Installation video
For additional information, visit us: www.fpc-securi...
DIAGRAM:
www.fpc-securi...
VIS-3000 Reader / Keypad:
www.fpc-securi...
Below you will find links to purchase these kits. (FREE SHIPPING WITH IN THE USA, UP TO 3 YEAR WARRANTY, 30 DAY RETURN POLICY NO QUESTIONS ASKED)
FPC-5098-VS: 300LB OUT-SWINGING LOCK KIT
www.fpc-securi...
FPC-5099-VS: 600LB OUT-SWINGING LOCK KIT
www.fpc-securi...
FPC-5100-VS: 1200LB OUT-SWINGING LOCK KIT
www.fpc-securi...
FPC-5280-VS: 300LB IN-SWINGING LOCK KIT
www.fpc-securi...
FPC-5283-VS: 600LB IN-SWINGING LOCK KIT
www.fpc-securi...
FPC-5286-VS: 1200LB IN-SWINGING LOCK KIT
www.fpc-securi...

[@DansWorkbench]

Wanted to take a moment and commend FPC. I recently purchased a similar kit to the one depicted in this video. The hard installation went pretty straight forward. Make a few holes, drill a few screws and the hardware was mounted. Then I was left with dangling wires.Looking at the manuals they seemed like you needed a degree just to figure out what wires do what. Then I watched this video and all seemed a little better and made a little more sense. I went a step further and used my laptop at the site of the installation and followed step by step with this video and connected all the wire just as they did. Even programmed the keypad just as they showed. Worked perfectly 100% the first time and there was no smoke. Thanks FPC for the video, made my life easier as this was the first time I had ever installed a mag lock.

[@FPCSecurity]

Thank you so much for you kind comments. Our Customers are # 1 !!!!

[@magneticlockaccesscontrole4698]

We would appreciate if you can leave us a google review,
Please review us on Google
www.google.com.co/search?ei=4PfZWregJIGy5gK_xIaADQ&q=fpc+security+miami&oq=fpc+security+miami&gs_l=psy-ab.3...3082.4457.0.4706.10.7.0.0.0.0.0.0..0.0....0...1c.1.64.psy-ab..10.0.0....0.UBqXVMkOHpM#lrd=0x88d9b90dac50af93:0x22716fa54f448c9e,1,,
Remeber we're here to serve you,
Best regards,

[@Kenginmlna]

muy bueno explica con detalle

[@magneticlockaccesscontrole4698]

Nuestros clientes son nuestra prioridad número 1. Nos alegra saber que el video le haya sido informativo.
Estamos para servirle.

[@giangalila7682]

thanks for the video very simple tutorial step by step.
I have one question, why you connect the (+) and (-) of exit button to the power supply?
pls reply,thank you

[@FPCSecurity]

Thank you for your message. The reason that the + and - are connected to the exit button is so you can connect power to the LED light from the exit button. If you have any further questions please let us know.

[@giangalila7682]

FPC Security thank you for your reply.....

[@FPCSecurity]

Thank you for your message, if there is anything else we can do for you please let us know.

[@giangalila7682]

Hi,what is the use of door contact in keypad/reader?

[@FPCSecurity]

The use of the Door contact is strictly to connect to an alarm system. So for you specific application you will have no need for it.

[@TheGubiatti]

Do you have any video for the installation of a visionis VIS-3005?
Trying to install the codes but no success, thanks.

[@FPCSecurity]

Dear customer, at the moment we don't have an updated video for the programming of the VIS-3005 keypad, however you can call us at 786-442-1220 and we will further assist you. Thank you