Watch Samdabuffer color sand polish paint using CSI products.
Vložit
- čas přidán 7. 09. 2024
- Watch Samdabuffer go through the steps of color sanding and polishing to a mirror finish. Using CSI Ceram-X and D1 polish enhancer. Sam is using the Flex battery powered polishers. All available at CSISHINE.com
If you are interested in contacted Sam email him at samdabuffer@gmail.com
As I just got this exact machine, I’m extremely happy this video got recommended to me. Thank you for posting.
That is perfection, right there. You've got to have the patience of a saint to do a job to that level of finesse.
This guy does superior work
Great video, this one answers a lot of questions!
Yes always ask how many coats of clear and brand of clear normally I would just use 800 thru 2000
Can you not achieve a hologram free finish with the rotary, thus the switch to a DA to finish?
Thx
Hi there
Yes but there is now an easier way using the same polish.
62-203 Ceram-x polish.
Buff with our double sided wool pad using a rotary.
Then switch tools to 5 inch DA polishing tool using our red foam 5 inch pad.
All steps with one polish.
Perfect finish every time.
Damn I can’t wait to use this produce Styles turned me onto it. Bought it from Coast Airbrush. Awesome work!!
Hi there please let me know if I can help. Jeff does know these products well too.
only pros can do this quick. i do this several hours plus a sore body
Great video- How does Sam handle curves and places that the buffer won't lay flat?
Great question Kimberly. It’s ok to tilt the buffer into the curve or use our three inch pads for smaller areas.
Tom
Rotary is king!!
Awesome 💯
Polisher brand? Me personally I like Makita I've tried you won't. I tried a little bit of all of them and I like the corded versus the battery powered you can find tune the 110 volt corded a lot finer than you can the battery powered
For me the FLEX battery powered rotary is the best. Battery last a long time and recharging is fast.
This Sam Da Buffer has mad skills! Tom, what sand paper do you use? Are some more durable than others?!
Hi there
I don’t know the brand maybe Sunmight. Sunmight is a great sand paper.
Thank You!
I seen Sam do so many mistakes with this process he did not block the last process with the DA plus he is using the same cloth that he used to wipe the excess residue of compound as well as wiping that using the same cloth to wipe the excess polish off I've been doing this professionally for over 25 30 years bro and I'm not impressed
You da man Sam
No surprise that car came to awesome. Why didn't Sam stay with rotary polisher?b well buddy
What’s he charge I wonder for avg one like this one he did on this video?
I believe that was an entire cut and rub. Usually about 40 hours
8000 wow... I stop at 5000
Sam do you finish with 8,000 by hand or dual action sander and also do you take it up to 8,000 with 3000 4000 5,000 6,000 7,000 8000
Sam does use finer sand paper. I find for all flat work 2500 is all you need. On the tight places go to a finer grit
soft or hard clear?
smile sam
Man you still talking too damn much