Video není dostupné.
Omlouváme se.
Tokyo Marui MWS Favorite Parts Manufacturers/Brands
Vložit
- čas přidán 24. 06. 2022
- Some of my favorite after market parts makers, not a comprehensive list just the ones that I use and have treated me well.
Main takeaway is I like guns modify or oem the most, g&p and t8 next. And avoid angry gun for the most part lol. However I thoroughly enjoy their heavy recoil buffer, it totally transforms the recoil experience!
Great video. Thank you. I just purchased my first mws and this video has helped me a lot. Keep them coming
Definitely interested in an update on the real steel buffer! Great video, thanks for taking the time to do this video!
Thanks man I have a bunch of stuff I should update, but tldr real steel buffers have been working great for me, I say go for it 🤙
@@Wolfman_NV I got my build upgraded finally after waiting months to get my parts from overseas. And it shoots 15-20 fps over field limit at room temp with a couple shots off the fill. Should I just use low pressure gas? Or is there a way to dial back the power. I'm sure in the summer it's gonna be way hotter. I am running about a 10" crazy jet barrel, and as far as I know, a stock TM mag and nozzle setup. Any advice would be awesome! I'm learning slowly on these GBBRs, but I am liking them, a lot.
Great video covering a lot of ground and questions!
I find the stock bucking to be the best surprisingly.
Stock buckings are great if you can find them, can be hard to source though. Buckings are super subjective, just have to find what works for you! I have a box full of ones I’ll likely never use again..
great content man love your videos!
Can I use a 70 degree decepticon bucking with a 265 mil 6.03 nitroflon coated brass inner barrel for tm gbb guns by unicorn airsoft with a tm mws
some batch of modify tan come really screwed and bad quality... I have old ones still working 6 months later... and new ones really f+++ed up in 3 months
so I have changed to nine ball purple and works really fine
Nine ball purple is a fan favorite for sure. Lately I’ve been using maple leaf silicone Mr hop
@@Wolfman_NV I was interested in them some time ago? how it performs? 60⁰?
im gonna use the flamingo 60% 2023
Thanks for the info poppa!
Angry Gun!!! Gun that makes you angry
try magic buffer by prowin, together with a steel bolt.
Like handguard
i wish i can find a buffer tube that fits my kwa lm4
do you have any experience with the angry gun speed bolt? im thinking of getting one but still trying to gather more info about it.
I do not, should be fine but I prefer the g&p aluminum bolts. Pts mtec are also nice supposedly. Lately I’ve been running ar-15 buffers in mine as they’re cheap and easy to source in the states, though they are typically heavier than a “speed bolt” would be
Hi. Great vid :) You think that You could link the items You use in the description :)
Hey thanks man, could talk hours on it but depends where you live, most parts are sourced from Asia although evike carries more and more mws parts at a bit of a markup if you’re in US, but check redwolf airsoft, jk army (high shipping), impulse 101, haoptwarts, dytac, rainbow8, mwc shop, plenty of others but I mainly use these guys. There’s also uk suppliers like eagle6 fire support weapon762 who might be easier if you live out there
Nice video. Did you use that 370mm 6.00 powerbarrel? Is it good? I'm planning to get one.
I ended up not using that as it seems to jam too easy and also didn’t notice any accuracy improvement. Actually the opposite if the slightest spec of dirt gets in it you’ll lose accuracy. 6.01 barrels are my preferred, I like Prometheus for 365mm or stock for 250mm, stock barrel performs awesome
@@Wolfman_NV I understand. I agree. However I have installed 6.00 and Im using BLS bbs 0 Jam so far. :) I will continue to use it. Thx for rply.
@@DevilsRockContract glad it works for you! I have a friend who swears by his as well. As always ymmv
Any recommendations to raise the fps?
Sorry for the delay! Yup the most preferred way is an NPAS which is an adjustable fps nozzle valve. Orga and RA-tech make them- I like the orgas as they adjust with a simple Allen key, bs the RA Technuses a propietary tool that you’ll be screwed without if you happen to lose it, both do the same thing.
Alternatively you can add a longer tight bore inner barrel and that will net you fps.
Be careful as fps is weather dependent, be sure to re-chrono your guns when going from winter to summer temps as it will jump up and joule creep.
My mk18 rail ever so slightly wobbles 1mm. What can i do to fix it? Thanks
Buy some barrel shims for $5, take it down, and add as needed underneath the barrel nut. Sounds like your barrel nut might just be loose too
Hi, just wanted to ask, what do u think about g&p nozzle complete set? Is it worth it?
Yes and no depending on what you’re doing, they work fine but is not a “complete” set as advertised from what I see. Based on photos it appears to be missing the “firing pin” and sealing buffer.. so if building up a bolt shell be sure you have what you need
im new to this airsoft mods thing, would you say that all mws internals would fit tokyo marui mtr16?
They are essentially the same internally yes, except the ambi bolt catch that the mtr has.
Where did you order your rifle? Evike has been out of the MK18 MWS for AGES!
I got all mine used, but would recommend buying from impulse101 if I was in the market for another. Less than $500 shipped compared to evikes $600. Get the cqbr if you want a short barrel build, will save some money in the long run. I’d also order their 5 pack of magazines at the same time to combine shipping as it’s a great price. FYI you need to wire them via wise, they don’t accept PayPal anymore and your order will be cancelled if you attempt to
What brand of qd buttplate did you put on that gm buffer tube?
Not sure just one I had laying around, I don’t typically use the qd mounts there
hi witch sling buffer is it?
Buffer? I like the g&p v2 or lately just use real steel ar15 carbine buffers for summer recoil, stock for winter efficiency
so is running propane in a stock MWS ok?
Yes, but eventually your nozzle return spring will break and leave you stranded. I highly recommend replacing it with a dynamic precision or other upgraded nozzle spring as preventative maintence, and you’ll be set. Eagle6 has great mws disassembly videos to help you do the swap.
@@Wolfman_NV what about magazine modifications to run propane?
If I buy a toyko marui rifle, what do I need to do to get it to shoot 350+ fps? as I live in Canada.
It should be right around there stock. I suggest the federal concepts npas valve so you can fine tune to field limits though, as they can vary weather dependent. He’s working on a v2 if you wait a bit more or his v1 works fine as well