how to fix P 0130 fuel economy and jarking smoking black solution Urdu and Hindi

It seems like you have a problem with your car's oxygen sensor. The code P0130 indicates that there is a malfunction in the circuit of the oxygen sensor 1 on bank 1, which is located before the catalytic converter. This sensor measures the amount of oxygen in the exhaust gases and sends a signal to the engine control module (ECM) to adjust the air-fuel ratio. If the sensor or the circuit is faulty, the ECM cannot maintain the optimal air-fuel ratio, which can cause poor fuel economy, black smoke from the exhaust, and rough engine performance.
There are several possible causes for this code, such as:
- A defective oxygen sensor or air-fuel ratio sensor
- A damaged or corroded connector or wiring
- A leak in the intake or exhaust system
- A faulty fuel pump, filter, or pressure regulator
- A malfunctioning mass air flow (MAF) sensor or manifold absolute pressure (MAP) sensor
- A defective engine coolant temperature sensor
- A problem with the ECM itself
To fix this code, you will need to do some troubleshooting steps to identify the exact cause of the problem. You can use an OBD2 scanner to read the trouble codes and the freeze frame data, which will show you when and under what conditions the code was set. You can also use a digital multimeter to check the voltage and resistance of the sensor and the wiring, and compare them with the specifications in your car's repair manual. If you find any abnormal readings, you may need to replace the sensor or the wiring harness. You can also inspect the intake and exhaust systems for any leaks, and test the fuel pressure and other sensors that may affect the air-fuel ratio. If you are not sure how to do these tests, you may want to consult a professional mechanic for help.
I hope this information helps you to solve your car's problem. For more details, you can check out these web pages that I found for you:

[@ArifKhan-xk1wh]

Bhai apki awaz saaf nahi arahi hy