How to Optimize Tilting Stability in RC Crawlers
Vložit
- čas přidán 15. 04. 2021
- This movie shows, how to increase the tilting angle of RC crawlers by widening the wheelbase and/or adding axle and bumper weights. A mathematical formula is being derived that can be used to predict the increased tilting angle as a function of widened wheelbase and added mass. Feel free using this formula to optimize the tilting behavior of your RC crawler.
Correction:
The term "wheelbase" was used in the wrong way. The wheelbase refers only to the distance of wheel axes in the longitudinal direction (front-back). Here "wheelbase" must be replaced by "track width" (distance between left and right wheel).
These RC crawlers have been included in this video:
- MST CFX-W J45C Kit, with some upgrades.
- Traxxas TRX-4 Chevrolet Blazer, with some minor upgrades.
Added components:
- Heavier wheels of MST CFX-W J45C: SR02 1.9″ Steel beadlock wheels from GMADE including tires PB9011NK 1.9 rock beast XL from PITBULL
- Additional weights at axles and bumbers from Banggood & Aliexpress
- Wheelbase extension: Hub Hex Wheel Drive Adapter 20 mm Extension for 1/10 RC Crawler from Banggood
More movies
- About the experimental tilting plattform: • How to Test Sideward T... and • How to Build a Test Ra...
- About the MST: For more see: • Rock Crawler MST CFX-W...
- About the Traxxas TRX-4 Chevy Blazer: • TRX Chevy in the Snow ...
Music:
- Siddhartha Corsus - A Sudden Gust of Wind (License free from FMA)
- Scott Holmes Music - Epic Trailer (license free from FMA) - Auta a dopravní prostředky
wonderful, the calculating of angle very great to make tilting crawling more better
Amazing!!!...my rig needs a lot of work!👍🙋🏻♂️👌
Good teaching, that helps to solve our problems of scale trucks.
Thank you - this is really helpful! I'm widening my track width and putting more weight down low. Will experiment with it
Great! Enjoy the hobby!
Glück Auf,
Klasse sehr informativ das video!👍
Great place guys. Great info 😍
Great explication 👍
Love this channel
Thank you! More about tilting will follow soon!
Excellent!
Thanks for information...👍👍👍👍🙏🙏🙏🙏
great, thank you
I've got my CG where I need it I can sidehill over 50degress already spent time playing with different setup's it'll stand at 60degrees depending on the surface nice explanation 👌🏻🍻🍻
I'm waiting on my wider wheel hex I sure hope they help to keep from turning over when side hilling
First thing I noticed at the beginning of the video is the direction of the wheels on the blazer. Truck went left to roll in first clip and then it went right to stay upright in second clip. Completely different. No wonder it rolled.
While I have know doubt a wider stance and weight down low helps. Approach also has a lot to do with keeping it upright.
Sure, you are completely right. In the Blazer the tilting improvement was less than only 2 degrees anyways, which makes it difficult to detect a difference on track. The verification parts in nature are more to explain the basic idea - to show the potential of an optimization wrt to the design. They are not the proof! The math/physics part are the real proof!
Thank you; keep watching, especially my next clip about spring suspension which is coming soon! 😉
@@rcscientific6004
Indeed. Looking forward to it.
Thank you for responding.
🥰🤩💥💯👍👏
Widening the track, the wheelbase is the distance between the front and rear axle
You are correct. This was a translation error, and has been mentioned in the comments of the movie.
You could also look up a 4 link calculator designed for real rock crawlers
Thanks for sharing very informative info..My rig is 4WS capra, I intend to add brass steering knuckles and portal cover weight for the front only which will give additional 270g in total ,do you recommend i should consider for rear?
Thanks for your interest. Additional weight at the back moves the overall center of mass of your rig further downwards, which is good. It also moves it further back, which can be good or not, depends where the other heavy parts (eg batt) are located, and how you want to change your rigs behavior in longitudinal direction.
@@rcscientific6004 I watched all your shared video... Really thankful you took time to compile the scentific explanation behind each exploration and much appreciated your kindneas for such details sharing.... I have one request if you may the knowledge of shock oil comparison for crawler, would you do what sort of shock oil (eg. Cat) will do the shock for application for best outcome... 😂 Hope this see this soon...
Your music too loud and your voice too soft. Need to be a DJ so my ears don't burst out of sudden loud sounds. But your ideas are good. It will help a lot of people 👍
Wide axles would help for side hilling?.
Sure!
Jetzt fehlt nur noch ein Video über torque Twist...
Kommt sicher mal ;-)
BASICALLY, PUT UNSPRUNG WEIGHT DOWN LOW. AND CAREFUL WHERE YOU PUT YOUR UPPER WEIGHT !!