Glow Plugs Replacement 2.0HDI Peugeot 407 / Citroen C5
Vložit
- čas přidán 3. 12. 2021
- Hello everyone today I have made video of me replacing a glow plugs on my Peugeot 407 2.0HDI. I hope you guys looking for info on glow plug replacement on 2.0 HDI will find this video use full please don not forget to drop me a comment bellow if you have any questions or just want to say something about a video. Video is long because its detailed. This video same as all our videos is made in full HD please adjust your CZcams video setting to the highest possible for a best video quality.
- Auta a dopravní prostředky
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
This guy doesn't only succeed where my local mechanics failed but also managed to actually record everything and with great angles. Outstanding job mister!
Thank you mate. I appreciate a nice comment. It makes my day.
Absolutamente increíble que gran trabajo ....y cuánta paciencia 😮
Great video, really useful for French cars with the 2.0 HDi engine. A triumph of skill and persistence over crap design, well done sir.
Thank you I appreciate your comment.
Great video, I have just replaced mine on a 307SW 2.0HDI, glow plugs 1 and 4 measured 2 ohms but 2 and 3 were open circuit so didn't give reading. On the 307 you have to remove the windscreen wipers and the plastic scuttle cover to get access as it over hangs the back of the engine, also there is no heat shield on the bulkhead. The job was much easier with this video as a reference. I had the P1351 error code for over 5 years and now I have zero error codes, Thanks for the video.
I have also had the the same code on my 308 SW for a long time. Doesn't seem to affect anything, but I read the DPF won't do a regen cycle with faulty glow plugs?
Also thanks for the tip regarding the bulk head, I was wondering how to get around that overhang!
Really great video and under these tight conditions very respectful! Have pulled off the plug of the glow plugs to check and had here already very big problems to pull off the plug at all because of the space.
Done glow plugs hate that stupid sheld how you filmed this is amazing and a big help thanks
I have a 2.0 TDCI Focus with this issue, same engine and I am procrastinating about doing this. Your video is brilliant but it has made me realise just how little I really want to take on this job now 🙂 I cannot understand why they thought this was the place to put the glow plugs on these cars! This engine (when working) is SO much better that the Ford 1.8 but when it's not working nothing is a simple job.
Thank you so much for taking the time to make this video, I struggle to get my hands in there let alone a camera and film it! Keep up the excellent work mate.
lol snap have the same a 2005 mk2 focus 2.0 cdti and yes what a bitch. thinking of pulling the main engine mount off to move the engine a little bit further forward, other than that brill engine at 230k miles
I used this to get it done. The hardest part was the damned carpeting near the timing belt cover! Thanks again Mad4FrenchCars.
Glad to be use full. Well done for getting it done
You sir are a champion , Thank you , i enjoyed every minute.
Thank you mate.
A big job, you did well to show how to remove while recording, thanks
Thank you mate for a lovely comment. I try my best.
Thank you. This video is the best I ve find. Fortunately I understand a little bit English. Good work!
Thank you my friend I really appreciate it.
Very hard quite impossible to do. Thanks for this video. Great Job
Thank you
Just what i needed today. Thank you!
You wellcome
Great job and great video, keep going dude and thanks for sharing.
Thank you mate. I am glad you like it.
Thank you very much for this great video. This motivate me, to change the glowplugs in my Fiat Scudo!
Good to hear that mate
excellent job. very detailed video
Thank you mate
Wow, thank you for such a detailed film of the removal/ refit of glow plugs,
I have this engine but its in 2007 ford mondeo, i have a glow plug fault, think i will order the glow plugs now,
Take it the black glow plugs was the faulty one, thank you for a great video. From the uk 👏👍
What a brilliant job u make mate,thanks for ur video,great job👍
Thank you mate.
Is this engine has a same timing belt as peugeot ew10a petrol sir?
very helpful, thankyou, will attempt this job tomorrow
Thanks for the video
Perfectly done thank you so much
My pleasure mate glad you like it.
bonjour
Merci pour cette vidéo et pour avoir réussi de filmer derrière le moteur .Maintenant il ne me reste plus qu'a faire pareil sur ma voiture
Bravo,
Une intervention pour des personnes averti, le risque de casse de la bougie est réel.
Tu a du courage de faire ça de nuit 👏 en plus tu prend le temps de filmer top
Merci mon ami, j’essaie juste de faire de mon mieux et de partager mon expérience.
Used this clip to help do mine on my Ford Focus 💃🏼💃🏼👍🏻👍🏻
Glad it helped.
Great job and excellent explicated! We need more like you on the CZcams.
Thank you mate I really appreciate your comment it really motivates to make many more videos.
I been waiting for this video for a while.
Great video, big BRAVO for you :)
I'm also owner of same peugeot 407 2.0 HDI from 2004 with same fault code. My car doesn't have problem when I'm starting it on, except when is colder (-10C or more..). I have bought new glow plugs but because of difficult replacing and possibility of making damage on engine while removing old glow plugs, services are refusing to replace them,they don't want to risk. Also I don't want to risk and have extra costs :)
It's not really a major issue you can still drive the car with them faulty most of people don't replace them as it is a risky job.
@@Mad4FrenchCars Great job and outstanding illustrations. Doesn't faulty glow plugs affect engine starting?
Salaam brother. Your camera skills are next level! Excellent video.
Thank you
Thanks for that video.
Amazing bro, congratulations
Thank you.
Thank you so much!😊🍀🍀🍀
Great great job!Thank you!
Fantastic video, probably the best one on this subject. My VOlvo V50 has the same engine and al glow plugs are dead. I was looking up against the job for 3 years already, the car still starts good in -10 winter weather but since i have the plugs catching dust on my shelf i will finally attempt replace them. I think i will lossen the lower gearbox mount and tilt my engine a bit forward thou, to gain a little more acces at the back.
Sounds like a good idea. Wish you best luck.
Really useful video. Thanks
Thank you
Great vid! Kicking myself, when I bought my 407, I had the turbo out straight away, didn't realise glowplugs were in an awkward space otherwise would have done it then! But a good tip at 12:29 - check the glowplugs with a multimeter first as it's so awkward to change. You'd look for the glowplugs with inconsistent resistance in the circuit. 95% of the time, it's faulty glowplugs BUT it could be the relay or wiring fault. As it only takes a few minutes to check, then atleast you know. More information is always betteR :)
Thank you mate appreciate the comment I couldn't agree more.
@Khalid Acosta, do you know what resistance values they should be?
I had the same code fault 1351 and measured resistance on n1 and nr2, but none at all on 3 and 4. I presume they must be gone, or maybe a mass problem?
@@Mad4FrenchCars Very nice instruction video, well done and captured! I think I have 2 bad or not working plugs, but this is a lot of work, pfieuw! Hats off!
Do you know perhaps if the bad plugs can cause a flunk at the yearly car inspection on too much soot partikels?
Well done 👍
Thank you mate
great ..good job thanks
Thank you mate
I'm surprised so much you was able to film. It help me change that dam warm plugs but to difference of your car mine was having oxidated bolts than I have tu cut drill and make new gang in the huls, drills Don have enough place it was a headache. I had to senk the motor a bit to get place to work, but to the end I got everything in place.
But now I hate French engineer what a basters 😂😂😂 thanks it was very helpful
Здравствуйте. У вас самые подробные поучительные видео. У меня Пежо 407 и благодаря вам я много чего узнал как делать. Жаль что не знаю ваш язык , но по видео все понятно. Я из Беларуси.
Здравствуйте, я благодарен за ваш приятный комментарий. Всегда приятно слышать, что мои видео полезны. Я не могу говорить по-русски, но я всегда перевожу любые комментарии или вопросы и отвечаю. если у вас когда-нибудь возникнут какие-либо вопросы о видео, просто прокомментируйте, и я отвечу на русском языке.
Я был в Беларуси. Мне очень нравится время, которое я там провожу. Я был в местечке под названием Астравек.
@@Mad4FrenchCars Maybe Ostrovets is 230 kilometers from me. thanks for the answer. I am from the city of Kopyl, Minsk region, 100 kilometers from Minsk. I have a Peugeot 407 sv 2.0 shdi 2007. fuel delphi
@@user-pw2wr5bf1g Yes you are right it's called Ostrovec is not far from the border of Lithuania. 2.0hdi with Delphi fuel system is a good engine.
Un Grand merci.
Excelente.
Thank you mate
On cold mornings my 407 2.0hdi emits blue smoke and runs rough for 30secs, would this be glow plugs?
Also what is the standard resistance of a single glow plug so I can calculate amps of 4x working glow plugs and use a DC amp clamp to ascertain how many are working
This job needs doing on my Scudo, been putting it off for a while 😂
I would wait for somemer then you have a longer days and also it's warmer. Also make sure engine is warm then you do it. It helps to undo glow plugs.
@@Mad4FrenchCars thank you, yes It’s not the time of year to be doing too much work on the vehicle. MOT next week though so we shall see how that plan goes 😁
@@noskills9577 good luck with Mot mate.
@@Mad4FrenchCars cheers, the old heap needs all the luck it can get
Respect for everthing , you are the best out the world , you've recorded everything that's amazing.
I don't know how you managed that to record . You are the best
great video... you are very patient. I have a coolant leak (possibly the EGR cooler) on my RHR, from the same location at back. What camera or phone have you used to shoot this video ? I am after something that will allow me to see where the leak is as the car is running. PS.. I have shifted the engine forward 2 or three inches off the mounts to gain better access previously which has helped immensely.
I used a gopro 8 to record a video. It could be one of the hoses leaking which goes to egr cooler it used to be quite common on 1.6hdi not so common on 2.0hdi but never know. Also if it's a hole and small leak you might be able to dix it with a seld sealing tape rather then swapping a hose as if you swap a hose you will have to refill cooling system and bleed air out of it
Thanks for the detailed video man! And I must say that is a whole lotta work for just replacing the glow plugs, damn. Is there not other way of doing it? Did you replace the plugs because of any symptoms like jerky ride, problems starting, car dying, etc or because of OBD errors? I am trying to diagnose sporadic light "hickups" while accelerating (they are kind of appearing , mainly when the engine is cold. And I have just the P1351 error showing.
Changing the fuel filter (and adding some water-removing fuel additive) took away my cars hickups
Hey man, I was wondering if you could help me out I’ve got a 2009 308 Peugeot that has the same code it was driving but stalling at some points, it now will only turn but not start and after the first try the engine won’t every try to turn over for a couple hours any ideas on what could be causing this issue thank you for the in-depth video
I have this planned with my 307.. it's a bugger that the plugs are around the back.. i supposed the head will be better hot to get the plugs out easier. I broke one in the 1.6L engine.
I was thinking of titling the engine forward a bit till it hits the stop down behind the sump
Ya I think your plan sounds good. If you can tilt engine forward a bit then that would help and also engine hot might help too. You can also try to spray some injector crack around them if you can reach location and leave it overnight it might help
Добрий день. Я з України. Продивився відео допомогло в ремонті мого авто Пежо 407 2.0. В інших відео по данному автомобілю теж багато корисної інформації. Дякую вам за відео роботу дай бог!
Thank you for a nice comment my friend.
i am thinking to get peugeot because of reliable hdi engine, also i like how easy is to change injectors here (my opel meriva requires to undo engine head to get to injectors :) But on the other hand glow plugs access is tough on peugeot as exhaust manifold is in the back closer to windscreen. On opel exhaust manifold is in front... anyway, there is no perfect access of everything, right? or is there such handy car for the mechanic?
Hi mate I have run 2 x 1.6hdi 407s up to 240k miles as a taxi and it was still going strong and sold for people who still use them. 2.0hdi is even more solid. 1.6hdi exhaust manifold starts in a front of the engine also turbo is in a front. 2.0hdi turbo and exhaust manifold is in a back. Glow plugs location is not great but you probably need to change them if you live in a cold country also if you change them they last many years. Peugeot is very good car for value. These engines designed very well and used in many cars like volvo, Ford, Peugeot and citroen. I would strongly recommend getting Peugeot preferably 2.0hdi. Good on fuel does average 55mpg and plenty of power in it.
Nice job and good strategy to just push aside the egr and cooler. I want to do in same way. By the way...did you unmount the engine hood for better acces?
Hi mate I have not unmounted a hood as I work alone so it would be a pain to line everything after job done, but idea is not too bad as it potentially give extra access to back of the engine.
How the hell did u film it and get hand down.there amazing
Hi guys, where can I find the oil breather hose pipe, part number 1192WH, but not in plastic please (I can find it in plastic) ! I need it made by rubber multipurpose, like seen between 9:02 and 9:05 in this vidéo.
Thanks for the help.
I'm from France.
Nice video...how come you didnt use a torque key or/and some lubrication/penetrating oil spray? Just relying on the "feel" for unscrewing/screwing the glow plugs?...and also...is it recommended to use some special grease when mounting the new glow plugs for better removal next time ? Thanks...great work..I love it how calm you were dealing with the procedure ☺️
You can use a torque key for anything but I simply don't use it. I must admit I didn't know where is a product to apply on them for easy removal next time. I did rely on a feel then unscrewing and I think I did mention somewhere about a spray you can use, it's personal choice really. Thank you for your comment I live and learn everyday I think like most of us which I think is a good thing.
@@Mad4FrenchCars i have one glow spark burnt...but I'll wait until winter is over and then change myself all of them...it's not so difficult to do lots of things at home if U have tools, good documentation before starting to work and some skills..and of curse U must like what U are doing...there is some type of grease dedicated to such type of things, heat resistant and sealant in the same time...will help a lot when unscrewing the glow plugs next time, and also, when replacing, tightening them at the torque indicated by the producer helps...anyways...everyone has his own way of working. Keep up the good work 🤩
@@tuzgureanu21 thank you mate I will try my best. I had one burned aswell you could see in a video was a bit tricky to get it out becouse it had a carbon deposit on it. I would probably use a bit of injector crack spray around it before removing also then turning it out you might want to do a bit of forward and back action like undo it then do it up tiny bit. I wouldnt wish to anyone to have one broken. Location is a nightmare. Anyway good luck with the job then you decide to do it.
@@Mad4FrenchCars Hi!! for that work you don't need torque wrench because if you put your hand on the spanner handle at less than 20 cm from the bolt then the maximum torque you can apply manually is around 20Nm and you need to be very very strong to rich that
You dont need a torque wrench because a small spanner only allow you to deploy around 20Nm of torque manually and dont stick grease on the thread cos it will burn eventually
could you make a video please on how to change the valve cover gasket?
Hi mate I have previously use a heat resistant silicon gasket from tube as I struggle to find a gasket to buy for 2.0hdi and even if there is one its not gonna seal up everything might be just a small one around injector holes.
Cluster hell design. Of glow plugs
100%
Nice video.. o have a Volvo V70 2.0d 100kw with this psa engine. Engine is quite nice, event woth 600k km on clock. But i have blue smoke in cold about 5-10sec.
Using Multitester on relay and glow plugs relay can show actual working or not?
USe ampclamp to watch if it's poolin current. With meter you can also mesure résistance betwen 1 and 1.5 ohms I think.
Beau travail👍 j'ai trop peur quand une de ces satané bougie commence a etre dur a deviser. Ca m'est deja arrivée d'en casser, une sur mon fourgons donc il est resté ou il est, et une sur la voiture d'un client. La c'est pas pareils et bonjours le boulot derrière. Meme les garagistes refuse ces boulots ou ils font carrément signer une décharge aux clients qui les dedouanee de toute responsabilité en cas de casse.
Very interesting video although I don't really have the skillset to do this job on this engine due to where they are positioned, however I wonder if you could tell me before you scanned for the fault when you started your car from cold did it just run lumpy on 3 cylinders smoke quite a lot until eventually running on all 4 cylinders & smoke clearing?
I only ask this as I've just bought one of these cars from a dealer & the next day when we went out it spluttered into life from cold how I described. I took it back today to them & they popped a computer on it that allegedly cost 5 grand & they said it's not showing a glow plug error & I am not entirely convinced. They gave me a free warranty so I could take it to another garage to get it sorted but I think in reality they didn't want to tackle the job.
Hi mate my car was working fine before glow plug replacement I only replaced it as it was the only fault coming on diagnostics then scanned and I wanted it to be faultless also make a video for a channel. Most of 407 have glow plug fault if it has never been done but it barely ever affect anything unless you are living in a very cold country.
@@Mad4FrenchCars Thanks for your reply I'm now confused as to what the problem could be then. Tonight when I finished work it started fine for the first time so maybe the car has been standing around a while who knows so I'll keep an eye on it. It does have a warranty so if it persists I'll get it checked out.
@@tichwykes starting problems in these cars mostly relates to egr valves as if they stay open let's say it becomes struggle to start the car. I would get it scanned with Diagbox or Peugeot planet it should be some sort of fault stored.
these engines will start fine on no glow plugs, they just smell a bit at first on cold start and on forscan will give a fault code,youre fault lays else where probaly fuel related , injector ??
Merci beaucoup, j ai une Ford focus mk2, 2l tci 136 CV , c est exactement le même moteur , un conseil , arroser les bougies au moins une semaine a l avance de w40, elle sont sorti toute seule , a froid 🙏🙏
Just a trick you just loose a bit a hex bolt under an on other side loose 2 bolts oon pipe and lift up and move , i did it this way!!
Good job, buddy!
I have the same 2.0 hdi 100kw,so I wanna ask you...at 09:53 that pipe you removed, on my car it has some oil in there, and also some oil leaks on the intake pipe(pipe which goes from intercooler to intake). And now at these cold days (from 0 to 6 Celsisus), my car won't start from 1st try, and sometimes it does... I refreshed my engine before 15000km, becasue I had damaged piston which curved 1 valve...so I changed that piston and it' holder, put new pistons rings at all 4 pistons, changed all 4 glowplugs, but my engine runs louder than it should, sometimes has to start it several times...it starts up and shut down immidetly...
I haven 't repaired turbo charger but it is not ok, cause I can hear that sound it produce...
So, is my engine still bad(cause of that oil in that pipe)? Can bad turbo charger pulls oil into intake pipe...? Car has good accerlation and it does not have blue smoke on exaust...
czcams.com/video/vO6Jxi0xJ_k/video.html
I have the same on my Peugeot 407. Oil on the pipe is okay said my mechanic, start and dies the engine that is happening in the morning when is cold, glow plugs said my mechanic.
@@enghelman It's not about glowplugs in my case, because it's only happening when outside temperature is from 0 to 8 Celsius...
@@miloshlionhi, i just changed my glow plugs and the relay, the car starts and doesn’t turn off alone, drives better, heats faster and doesn’t make the smoke. Try a new relay, is very easy to replace, is under the computer unit.
How are you people... how do i remove the cylinder head of this baby.. especially the exhaust side
Have a good time, I think you will answer my question, that's why I'm asking you, I cleaned the throttle and map sensor before, when the car is idle, the idle rises in the lpg, it automatically comes at 1500 cycles, it happens when it's idle, it doesn't happen in gasoline, it drops slowly when the clutch is pressed, what could be the reason?
Hi mate I have not worked on any vehicle with lpg for a long time. Maybe something wrong with a lpg regulator.
@@Mad4FrenchCars ok i understand thanks for your information
Hello, I don't understand why you don't disconnect the cooling of the egr cooler and remove it. What problems can it give to do that? Everything would be easier, also in my case I have to clean it because I have smoke problems. good video thanks
Well it wouldn't give you more problems just it would make your job longer as you would have to refill, air your cooling system if you disconnect and take out egr cooler
@@Mad4FrenchCars Thanks so much
Hey bro, i have a question: is glow plugs are in the back of engine in non-turbo version of 2.0 hdi 90hp?
Good question mate I believe it would be in a back but I can't really tell as I have never worked on a non turbo 2.0hdi
@@Mad4FrenchCars thank you
You have to disassemble it all to change the spark plugs.
mine shakes in the cold, does anyone know what it could be?


Hello sir, I have the same engine on a Ford Galaxy 2.0. I have difficulty starting in the morning and the engine jerks for two minutes. Do you expect a problem with the glow plugs?❤
Same issue..First cold star after overnight because same as yours just in one day. The engine judder for 30-40 seconds and emits whitish/ bluesh smoke. Then runs fine. 3 glow plugs was dead. Changed all 4. Symptoms stayed same but for a very short time. Thinking about timing, compression or injectors.. did you solve the issue?
Yo man, do you know much about the 2.2 hdi sport 170 407?
Not gonna lie to you mate, I have never had one myself. I would join a Peugeot 407 UK Facebook group loads of 2.2 hdi owners there and some really knows a lot about these they would answer your questions better.
@@Mad4FrenchCars yeah I'm in there asking about the boost pressure sensors locations but no joy as of yet
@@iancritchley6660 the guy called Bogdan Rechin knows a lot about it. He is in a group I think he have a really nice 2.2 hdi sw. I would try luck googling it if I were you mate
@@iancritchley6660 in 2.0hdi its next to camshaft sensor but 2.2 hdi I don't know
@@iancritchley6660 sorry you asked about a boost pressure sensor I think. they are on intake manifold usually.
do you have a link for the pliers please ?
www.ebay.co.uk/itm/372854880277?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1JPIqhOmmRDmfOKHYJVW7NA61&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=372854880277&targetid=1816181029899&device=m&mktype=pla&googleloc=1006976&poi=&campaignid=19090194174&mkgroupid=147009364227&rlsatarget=pla-1816181029899&abcId=9303860&merchantid=424817907&gclid=CjwKCAiA8OmdBhAgEiwAShr400DJQbCTpG4cCjKb_7yKt5znzUeEZYLGpk3JDCOjROp7rOZzJyTJWRoCpLIQAvD_BwE
My dealer said that glow plugs don't get faulty. The misfire alarm is a software thing!
Well glow plugs do get faulty also a glow plugs connector cable can be damaged. It doesnt really effect a car if you live in uk or somewhere there is no cold weather but if you live in a country with - 30 temperatures in winter then you get to learn what a glow plugs for and it does effect start in a morning a lot
Thanks. It makes sense what you write.
This plug is for the candles
Is that the plugs gone
Yes they where.
Bonjour dommage en anglais et que la personne est seul pour filmer, mais aussi non la vidéo est complete. Bravo.
bonjour mate merci pour ton commentaire je l’apprécie vraiment.
P1352
I had one 406 2.0 hdi i changed the glow plugs in 30 min. Now with 407 is pain in ass. Why the fck they put them there for god sake!
Don't need to do all this just remove the engine support and flip the engine toward the front of the car
Can't wait to see your video on how you replace a Glow plugs on 2.0hdi without moving a Egr housing backword's. Please drop me a link so I could watch and educate myself.
@@Mad4FrenchCars just need to remove the collector of egr not egr itself.
czcams.com/video/O7LkwCfSgMc/video.html
@@TheAmazeer my friend I don't think you watched my whole video. In a link you dropped here you can't see no procedure the guy only shows a bolts wich I have undone in my video. I have not tottaly disconnected egr I just moved it back also in your silly video link the engine is out. If you move engine forward the only thing you will achieve is more space in a back you will be still moving egr housing backwards a bit.
@@TheAmazeer still waiting on your video made on how you replace glow plugs without moving egr housing back a bit.
@@Mad4FrenchCars you will have to wait 80000 km 😂😂😂😂