Realistic Pro 94 1000 Channel Scanner Repair and Review

Deoxit Contact Cleaner amzn.to/3AoUWe8
Ceramic adjustment tools amzn.to/3njJkGe
LED's amzn.to/3yzKboZ
Realistic Pro 94 1000 Channel Scanner Repair and Review
Specs:
1000 channels with 20 banks of 50 channels (500 channels/10 banks at a time, group A or B)
Frequency Coverage: 29-54, 108-136.975, 137-174, 216-224.995, 406-512, 806-823.9375, 851-868.9875, 896.1125-956 (excluding cellular) and 1240-1300 MHz
Extended coverage of 220 MHz and 1,240 MHz ham bands
Follows VHF, UHF, 800, 900, Motorola I, II, IIi plus EDACS analog trunked police/fire/EMS radio systems.
Scan rate 50 cps
AM, FM
5, 12.5kHz steps
5 ID lists, 10 IDs per list, 50 IDs per bank
ID delay
Priority IDs
Status bits
20 priority channels (10-group "A", 10-group "B")
Service search makes it easy to explore preset frequencies for police, fire, weather, aircraft, marine and amateur radio
Scanner has built-in NOAA weather alert with level of alert displayed
Auto backlight (94A/B only)
Computer interface/control (94B only)
10 monitor memories
Data skip
4 AA alkaline/Ni-Cad batteries
To Help Support the Channel:
My Amazon Gift Wishlist www.amazon.com....
Email:
[e-mail]
I am an amazon associate if you use the links provided I do receive a small commission at no extra cost to you which helps me out on the cost of making videos

[@jeffreyb6165]

Scanners are my hobby, and ⅔ of the handheld scanners i have aquired that were not working had one thing in common...... battery corrosion.
Depending on the location, a tiny spot of corrosion can affect a scanner, so its important to not only remove the corrosion that is readily visable, but àlso the corrosion that is not easy to see.
Sometimes when batteries leak off the corrosion will run beyond the battery compartment and into the scanner itself, so if theres a lot of corrosion involved and you've cleaned what you can see and the radio still doesnt come on, remove the screws and carefully open it up to make sure the corrosion hasnt gone beyond the battery compartment.
Ive cleaned corrosion inside the case and even on the circuit board.
Ive had scanners with tons of corrosion that still worked, and ive had scanners with the smallest amount of corrosion that wouldn't even turn on.
Location, location, location.

[@Airmadillo]

Let me first say thank you! a little piece of metal not making contact, the nightmare is over!

[@SirensAndAlarmsOfNorthernIL]

Got one of these, but I wonder if I can disable the frequency step on it

[@elizabethlewis399]

I need help with my pro-94 if you can help me. I've had this for about 20 years. Everything seems to be working well, but I don't hear anyone speaking like I used to as if it's obsolete or something. I used to have local fire, police, etc.

[@TheElectronMan]

Could be one of two things one it has lost all the freq's for you local responders or they have all went digital encrypted which no one can hear those anymore. In my area all the major responders police fire etc have went digital encrypted, guess they don't want us know what they are doing even though we pay their salaries, but I do have some county and local sheriff that I can still hear. Go to broadcastify.com they will list all the freq. that are evaluable in your area...

[@dennishavaran-sz9zm]

My frequency read out isnt bright anymore. Any suggestions welcone

[@kevinemilcar887]

Uniden sds100 Scanner

[@TheElectronMan]

Good scanner