Add directional antennas to DJI integra goggles
Vložit
- čas přidán 29. 08. 2024
- After seeing the video of Shalev Shabtai : • Dji goggles integra an...
I decided to take a look inside the DJI integra goggles and found out that the removal of the existing external antennas is possible.
Cables needed :
u.fl to rp-sma female 10cm
u.fl to rp-sma female 15cm
Links to the 3D model of the parts:
www.thingivers...
Thanks Michael from elevanlabs.io for the Voice 😂
Royalty Free Music from Tunetank.com
Track: Chill Heart by 99Instrumentals
tunetank.com/t...
Absolutely awesome video
I have the integra goggles, and almost immediately replaced the stock antenna with the G2 flip from fly fish RC I took the stock antenna apart and de soldered the antenna elements then removed the hinge pins and removed the entire upper part of the antenna. I then did the same with the G2 antennas. I opened the front housing, de soldered the leads from the mcx base and removed the hinge pins, then reassembled the flip G2 upper housing onto the stock base, replaced the hinge pins, re soldered the antenna leads to the G2 elements, replaced the housing covers and it worked perfectly.
Using the stock O3 air unit antenna or the fly fish long range antenna for the O3 both of which are linear polarized. The stock Tx antenna gives me about a 10% improvement in range and maybe 5-7% better penetration, but the fly fish long range anti gives me 15% more range and at least 10% better penetration, and this improvement is omnidirectional just like the stock antenna.
I have a low spot on my property that I used to drop to 9mbps when I flew through it at low level like 5ft off the ground. Now I only drop to 19mbps on the stock Tx antenna and 23mbps on the fly fish long range Tx antenna.
Over all a huge improvement but I must caution you only use the linear polarized antenna at both ends. if you use the G2 Flip with a left or right hand circular polarized antenna you will actually decrease reception quality by a substantial amount. That same area that went to 9mbps drops to 2mbps and my video feed is unusable and I have to climb out fast to get to an altitude where signal is restored.
OMG !
When i was choosing between Integra and Goggles 2, i go with integra because of the integrated battery and for the price of course !
I was a bit upset because the antennas could not be changed ... until today,
Thanks you for this work and sharing with us!
PS : I was working on a yagi antenna prototype to boost the signal without dismantling the integra, but you just do it better :)
Double PS : You should fly with an omnidirectional antenna and a patch.
With this combo you have the advantage of a true RC patch in range and the advantage of the 360 degree reception of an omni
Fly safe 🔥
Thanks I also bought the yagi antenna but before I received it I found this trick so couldn't compare 😂 I agree with directional antennas but did not dig deeper into the problem and just went for the same antenna system that on the goggles 2 for long range. Since I only fly long range I don't care for omnidirection, what I have with the true rc is enough for me 🙃
ONDE ENCONTRO ESSE ADAPTADOR PARA COMPRAR?
@@dronessorocaba9383 no comprar. You must print it 😝
@@piotr.G_labCould tell me where I can find the sample for printing?
@@denisfedorov6467 in the description ?
great man, I've been waiting for this content so long!
Hey dude, I finally got around to making that upgrade. Thanks a bunch for all your help, seriously appreciate it. Oh, and btw, in my latest video where I'm testing out those antennas, I gave your video a shoutout. It totally deserves more views, man! Good luck up there bro!
Thanks ✌️ I'll take a look at your video because I'm also curious about the results 😂
:)))
Oh, so that was you, huh? :)) Now it makes sense... source: channel pages :)) Well, things could've been a lot better if I didn't have to move around during the flight because of some interference (had some tractors passing by, so I had to shift when I was about 2-3 km out, and didn't quite get aligned with the drone, it was about 30 degrees off coverage). Definitely gonna do another test. But hey, I'm still pretty happy with how it turned out!@@piotr.G_lab
Ho appena fatto l'aggiornamento ai miei INTERGRA però con le X2-AIR😈 è un'altra vita!! Grazie per il bel tutorial!!!
Cambia veramente tanto fare questa modifica ?
Fantastic work! I actually went with the goggles 2 because of the removable antennas and changeable battery. No regrets so far, but this mod would have made that decision much harder if it had been out when I "upgraded" my goggles from the V2's. I still think the ability to swap batteries and run different packs makes the goggles 2 the better choice, but I am really impressed with your solution here. Subbed.
Also I think the field of view is bigger on the goggles 2 and for this I dont have any trick 😂
Bought goggles 2 during the holiday sale for $430 USD but I returned them due to the wide FOV which is great in theory and should have been in application, if not for DJI making the lenses too small. Even with the face mask removed and my eyeball pressed right up to lens with lashes touching, I could not see around the lens outer diameter enough to view the wide FOV of the display screens. I picked up a set of Integras and they are much better, but still cut a small amount off with the left menu being a little blurry as well. I do love the top strap which helps me have the goggles tighter on my head without putting pressure on ton of my nose and if the battery dies I can simply plug in a XT60 to USB C cable.
@@ChrisHarmon1 yeah I have same issue. I have to chose between side of screen blurry or center of screen blurry by moving lenses 😬
My friend @@piotr.G_lab how was the battery can we change it new lion?
Awesome! I also wanted to make a similar video but gave up. All the parts I assumed would work didn’t lol. Thanks for figuring it out. Will follow your instructions and subbed! 👍🤩
Would it make sense to connect the TrueRC antennas to the internal antennas ufl connectors instead of removing the stock external antennas? This would result in 4 external antennas, 2 directionals (TrueRC), and 2 omnidirectional (stock). Or is there a reason not to use the internal antenna connectors?
You made my day, many thanks to you
Isn't DJI a dual frequency system? But walksnail is just 5.8. is the 2.4 link just not needed?
Hello thank you for this very encouraging video, please where can we buy these antennas and all the accessories that we see in the video ?
Thank you in advance,
Which antennas did you by from truerc? The dji google 2 one, right? They seem to work with the integra as well..
Good job, man!
+1!
good job Piotr !
My pleasure Tom 🥸
Could you share the link to these TrueRC X-air 5.8 anthenas with SMA connector?
tricky, but cool! thanks, man :)
Wow brother this is incredible, when did you manage to reach in km with this hacks? thank you so much
Nice job Bro.
Can you comment on the performance you got going from the stock linear to these antennae? I've seen some people swap the antennas on the goggles 2 but didn't see much of a difference, maybe 5% +/-. Interested in your experience.
Sorry I can't say precisely I didn't make any range tests. I can just say that I fly now at 3kms away with a comfortable bitrate in the range of 20-30 mbps
Im about to upgrade my g2 googles. Any tips how to remove old antenna adapter from them? That's the hard part for me...
Only for this mod I would have purchased integra. I still miss my v2. In my opinion its the most versatile hd goggles. I brought goggles 2. Can you please tell me if I can do the same on g2 ?
Or atleast little bit of heads up, because I want to use my truerc x ii m2 on my g2.
Cool!
“Cenementineter”? I’m assuming this was done with an AI voice?
Lol centimeters 😂 yes AI voice my speaken english is so bad
@@piotr.G_lab 🍻🍻👍🏽👍🏽👍🏽
great job. But why doesn't anyone make an adapter, to be used with antennas that are upgraded on the goggle2, just plugged in like the original DJI?
Too complicated. Looks like the plastic molded parts inside the goggles are different. You would have to redesign the inside of the goggles 😩
Hello.
the link is no longer valid it is cut.
Is it possible to have the correct link please?
www.thingiverse.com/thing:6434350/files
@@piotr.G_lab Thanks my man
16 srews right? that's feckin overkill hahaah....anyway, great video, detailed and informative. I have some questions though, which polarisation shall I choose when buying aerials? Or it don't matter? As you have more experience with mods this one will be easy to answer: could moding be done by only removing face plate drilling small holes for coax and attaching antennas that way? Without risking to dmage something inside googles? I am just curious ...
😮 It's interesting how the reviewers said that the Integra antennas cannot be removed.
Its not really meant to be removed 🤔
Not easily removed
@@cambellgrey3079 which is what they should have said.
Yea if you take it apart to its pieces and void your warranty that’s non removable to most people. Like apple’s memory on their macs is non removable but if you got the skills you could solder new chips on there…everything is possible if you look at it that way.
Technically anything is “removable” if you want it bad enough 😂
Nice ! Thanks
can this increase the range of the integra?
Zajebiscie nagrana gadka ;)
That’s nice
Nice project! So… the range was increased by how much?
Didn't make any test. Didn't have any issues with bitrate. You can check some other videos on CZcams stock antenna vs x-air on goggles 2 basically it will be the same. For example I like this one : czcams.com/video/hXPXYs6O4MI/video.htmlsi=YzGWo0YNrGz9LA5H
Or this one for long range : czcams.com/video/9edJqO__8jY/video.htmlsi=JQPPWVsnr6wNJcUg
I did a similar thing with my integra and I can tell you that the range is way better, even with o3.
I used the same xair antennas, but kept the external antennas and replaced the internal ones with the xairs
Great video! I have seen your files and will be getting someone to print for me. Do we just print 2 sets of all of them?
Thanks!
Thanks. One are to be printed in PLA and other in TPU. Actually the design in TPU is better. So just print two times tpu_upper and one time tpu_rh_lower and tpu_lh_lower 🫡
@@piotr.G_lab Nice. Thanks a bunch!
Question: I plan on buying the mini 3 pro to use with the integra googles and controller. Should I buy the mini pro 3 with the display on the controller, or save a hundred dollars on the combo with a controller that has no display?
The controller without the display would be my choice you can always attach your phone to it if you want to fly without the headset.
my question is, right and left antenna is the same signal 5.8Ghz ? if can use the same signal then 100% i will do this to get more range on my integra
If we are using this antennae in goggles then what antennae have to use in the o3 air unit module ? Can any one help me on this
Can you double check your thingiverse 3d print link in the description? It's not working for me. Thank you.
Sure I'll take a look tomorrow 👌
www.thingiverse.com/thing:6434350/files
@@piotr.G_lab Thank you, I'll check it out. I'm using all LHCP antennas on my Long range drone and will attempt to swap all the integra antenna to match it. I'm going to attempt to disconnect the other ufl and add True RC patches like your video, Also add True RC stubbies too! I'll see if your file can be modded somehow to fit it all. Will tag you as inspiration when I complete it! Cheers.
what module do I need to use integra with analog?
is if even possible ?
no
is it an IPEX1 or IPEX4 u.fl connector?
Good question. On the description it says UFL, U.FL, IPX, IPEX, IPX
@@piotr.G_lab can you please post the link of the connectors you bought?
fr.aliexpress.com/item/1005005121536674.html?spm=a2g0n.order_detail.order_detail_item.4.23b97d56q4om34&gatewayAdapt=glo2fra
How many degrees does this lens show?
The reception don't improve enough to do this not worth taking your goggles apart
Hello can you elaborate pleaze i would like to know more !
Can we replace the strap of integra google ?
“Great success” 😂 still always hear it in borat voice
Lol yes AI voice didn't manage to mâle à voice like Borat 😂
wow!!!
Where do I order these? I only see the .slt file
Nie mam gogli integra ale obejżałem z rozkoszą
Simple enough
Can i mod analog on this integra Sir?
where did you buy u.fl to rp-sma female 10cm
u.fl to rp-sma female 15cm
Aliexpress
can you drop the link...
@@piotr.G_lab