Alarm Check Valve Assembly Process

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • Alarm Check Valve Assembly Process
    Wanna buy alarm check valve from a real manufacturer?
    Feel free to contact me:
    Contact Information: Diyong Liang(Mr.)
    Email (first choice): diyongliangmr@siifuu.com
    Website: www.siifuu.com
    Mob./Wechat/QQ/Facebook/WhatsApp/Skype:+86 18606963202

Komentáře • 20

  • @csonracsonra9962
    @csonracsonra9962 Před 2 lety +1

    Thanks to all three of you men who apparently were too awkward to speak and guide along with what you were doing

  • @chamboadventures6781
    @chamboadventures6781 Před rokem

    Pipe works a bit loose , use some ptfe tape

    • @siifuu
      @siifuu  Před rokem

      Yes, thanks. This is just a guiding video to show our customers how to assemble the valve.

  • @storm_bringer2266
    @storm_bringer2266 Před 2 lety

    does the inlet pressure gauge reading is always higher than system pressure gauge reading? (wet type sprinkler system)

    • @siifuu
      @siifuu  Před 2 lety

      No, they will be the same. Or, the system side pressure will be higher than the inlet side pressure.
      Because there's a pressure compensation device(one way), so if the system side has something like a little leakage that causes pressure drop, a little stream of water will flows through compensation device, into the system side to keep both sides have the same pressure.
      2nd, becuase the height of water causes pressure increasing in the system side guage, and the water will not possible to flow into the water inlet side. So, the system side gauge may has a higher reading than the inlet side.

    • @storm_bringer2266
      @storm_bringer2266 Před 2 lety

      @@siifuu oh, my inlet pressure reading is 250psi and system pressure is 220psi in standby mode.. what is the problem about this?

    • @siifuu
      @siifuu  Před 10 měsíci

      @@storm_bringer2266 this is not a common sense. Check to see if there's a leakage on the system side or valve trim, check to see whether the pressure gauge damaged or not.

  • @its_me__Akshay
    @its_me__Akshay Před 2 lety

    is there a NRV inside of an ICV..?

  • @lenphil9875
    @lenphil9875 Před 2 lety

    Why is there a connection between the gauges?

    • @siifuu
      @siifuu  Před 2 lety +1

      It's a pressure compensating device to keep the upper chamber has a same pressure with lower side while set condition.

    • @lenphil9875
      @lenphil9875 Před 2 lety

      @@siifuu Thankyou. Makes sense now.

  • @SonuYadav-eb5ke
    @SonuYadav-eb5ke Před 3 lety

    Show inside alarm valve

    • @siifuu
      @siifuu  Před 3 lety

      Email me, diyongliangmr@foxmail.com, I will send you more details.

  • @SonuYadav-eb5ke
    @SonuYadav-eb5ke Před 3 lety

    Please tell name number waise part fitting

    • @siifuu
      @siifuu  Před 3 lety

      Email me, diyongliangmr@foxmail.com, I will send you more details.

  • @SonuYadav-eb5ke
    @SonuYadav-eb5ke Před 3 lety

    How to work