SINGLE LAYER HDPE AND 3-LAYER PPR PIPES EXTRUSION LINE

SINGLE LAYER HDPE AND 3-LAYER PPR PIPES EXTRUSION LINE
www.amut.it
Line for the production of both kind of pipes, multilayer PPr with glass fiber and HDPE pipes for drinkable and hot water and for gas
Pipe diameter: 20-75 mm and 3 different SDR
Line speed: 20 m/min
Output: 200 kg/h
The multilayer technology with glass fiber:
improves the material properties as the dimensional stability, the traction, compression and bending;
reduces the thermic enlargement, the weight of the product (and consequently the cost of the stock) and the linear expansion (around -75%);
reinforces the pipe structure;
improves the installation and the pipe-laying.
FEATURES:
- 2 single screw extruders EA40 (one for the middle layer filled with the fiber glass and one for the external and inner layer in PPr. The screw diameter is 40 mm and a L/D = 33:1, feeding bush water-cooled, 34 KW gear motors driven by frequency converters.
- Co-extruder EA20 orientable for longitudinal colored stripes.
- Multilayer head with spiral distributors to separate and to merge equally the layers.
- Calibration two-stage vacuum trough and cooling unit.
- Haul-off unit with two motorized belts controlled by frequency converters and synchronized with extruders speed.
- Cutting unit for a precise cut up to 30 pcs/min.
- End line composed by stacker or winder (on request).
Mailto: [e-mail]

[@DornC24]

How do you manage to cycle the water to keep it cool while in the vacuum? If you open a drain port, won’t the vacuum break?

[@extra6839]

elaborate? the water comes through the water tank with a cooling tower

[@FaustoBattaglia-nc9kk]

Buongiorno
Sono titolare di un Brevetto per Invenzione Industriale relativo alla calibratura di tubi effettuabile senza l' utilizzo del vuoto
Questo è il mio sito internet:
Potrei essere utile per Voi?

[@hmvkbeverages]

Please give idea of complete set up

[@terrellzhao5604]

👍👍

[@AliAli-nz3uf]

Kindly I want a confused rate

[@MrJAT302]

Price for this specific setup complete, 3 layers.

[@rahulasahu6424]

9348270400

[@Amutspa]

Please write an email to [e-mail] with your specific request. Thank you!

[@riyadahmednajm]

How much this prod. Line cost?

[@austinshi9938]

Riyad Ahmed ，How can I contact with you?I will quotation for you

[@taimoussimohamed3375]

Slm

[@MdRubel-ow5tx]

Any agent in Bangladesh?

[@catpantsfriday8423]

How do I buy one of these?

[@Amutspa]

Please write an email to [e-mail] with your specific request. Thank you!

[@taimoussimohamed3375]

Je suis extrudeur qualité

[@yassineziyadi9097]

😜 😜 8⃣