How To Fix Dell Laptop Key Keyboard - Key Install Repair
Vložit
- čas přidán 1. 01. 2023
- If you have a key or keys on your Dell keypad that are not physically behaving the way they should, you may want to disassemble them, inspect for damage, and if no damage is found, reassemble correctly. If they are damaged, you would most likely need to replace them. Here you can see how to do that all safely and correctly! If your key is phically fine but still not working, try troubleshooting it as seen here: • How To Fix Troubleshoo... . Check out the FAQ's and Related Video Links below !!
Please remember to Like, Share, and Sub if this video was helpful :)
To Donate, feel free to leave a Super Thanks by clicking on the Heart Button under the video.
Related Video Links:
Get Great Games at Humble Bundle: www.humblebundle.com/?partner...
For Tools, Supplies and Computer Components Suggestions, visit: www.amazon.com/shop/pcmonkey
How To Troubleshoot Keys Not Working: • How To Fix Troubleshoo...
Large Key Video (Enter, Shift, Space, etc): • How To Fix - Dell Lapt...
FAQ's:
Q: Where can I purchase replacement keys?
A: If the key assembly is not installing correctly, its either due to a component being damaged and needing to be replaced or a component not being orientated correctly. I would disassemble the key as seen here in this video and inspect for damage. If there is no damage, install the key. If there is damage, replace the key. Would you like help locating a key? If so, what is the brand and model for your computer?
Q: My Key Cap will not click down in place correctly. What's wrong?
A: If the key assembly is not installing correctly, its either due to a component being damaged and needing to be replaced or a component not being orientated correctly. I would disassemble the key as seen here in this video and inspect for damage. If there is no damage, install the key. If there is damage, replace the key. Would you like help locating a key? If so, what is the brand and model for your computer?
Q: The Hinge Clips came off with the Key Cap. What do I do?
A: Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool. - Věda a technologie
Thanks for watching! Feel free to follow my new channel showing general computer use videos and tech tips! www.youtube.com/@JamTechTips
Also, check out all the great games and ways to save at www.humblebundle.com/?partner=pcmonkey
To Donate, feel free to leave a Super Thanks by clicking on the Heart Button under the video.
You saved my keyboard! You are very underrated and you deserve so much more! Keep up the great work and thanks a lot!
Glad your all set :) Always here if needed !!
I knew this was 1 year ago but it save my dell laptop! Thank you so much
Glad your all set :) Always here if needed !!
DUDE THATNKS A LOTTTSSSS!!!!! the key fell out like for a half a year, but I could put it back in. right now it just totally came out, and i couldn't get it back. THXX
i mean the vid helped me get it in.
@@kindafallen Glad your all set :) Always here if needed !!
Thanks for this video Jamin. This helped greatly since I had no idea how to push he key back into place. Thanks for the clear instructions!
Your welcome !! Happy to help :)
Thank you so much for this. I was concerned about the hinge clip coming off. Now my keyboard works perfectly again.
Great to hear !! Always here to help :):)
Thanks for this key repair vid, it is really helpful.👍😎
Great to hear !! Always here to help :):)
Not too long ago my W key wouldn’t sit in place, the key cap is kinda stuck to the back of the actual key and I’m too scared to remove it because I might break it if I try to put it back in place it will stay but if I press the key too much it comes out, any advice?
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Nice vid - I had a problem with keys not registering when pressed, on a laptop I hadn’t used in a while - a real easy fix was to press and hold the key down , and gently twist the tip of a screwdriver in the cracks around the key’s edges - the friction was enough to clean the contacts, without disassembling the key - it’s a good first step to get problem keys working again!
Glad your all set !! Always here if needed :)
I'm super happy with how thorough this is, usually I have to find like 5 different tutorials before I find my issue, but this had everything in one video! My little rubber piece came off and I was worried if gluing it would ruin it, but it seems it should be fine (hopefully gorilla glue works), if not I'll take it to a tech shop but thank you for the helpful tutorial :) (I'm hoping I can also glue my key back together since it came off by breaking in half by being used too much)
Thanks !! Glad this video was helpful :):)
Hi! I have a problem with my hp pavilion 15 gaming laptop every time I boot it up a black screen appears and when I press either F2, F11 etc it’s says “F2…Startup check” on the bottom left corner is there any solution?
Are you able to try the steps seen here? czcams.com/video/_qF-oqPrn7M/video.html
Hey! I have a victus laptop and the S key has completely broken off of the laptop and it's showing the metal parts, I was wondering if I take this to a shop is it repairable?
Most likely, everything is reparable. However, many computer shops do not like doing key repairs. They prefer replacing the keyboard so it depends on where you take it.
@@PC_Monkey Thank you Jamin, I'll probably take it to best buy to see
@@Trash-bf6uu Good luck !! Let me know how it goes :)
It's hard to see the white plastic piece, you just see a white blurred thing. Should be re-recorded with an alternative orientation of the camera.
What part are you looking to see more clearly that is not understandable when looking at yours?
Just more detail. Since it is the hardest part to remove. Your movements are very quick and the footage is not very focused. I'm not able to see the exact points your applying pressure to. I'm able to remove the keys on my laptop, but not the retainer clips properly without breaking them. A video exclusively on the retainer clip would be appreciated.
@PC_Monkey the video is perfect, thanks.
hey the 2 pieces seperated in the white thing if you see it carfully or break it you cna see how od i put it back together
Yes, the Hinge Clip can be put back together after it comes apart in two :)
Please reply because the metal bit holds the clips broke off and I don’t know what to do
If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
See, im having this issue (with the dell g15 if that helps) where when i put the key on, the bottom two clips arent attached. ive done exactly how youve said and at the end, when i push it down, it returns to that same issue where the bottom two arent hooked on. how can i set it in correctly?
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
did you find any fix zain?
@@amruthkatari4343 Do you need help?
@@PC_Monkey yes I have the same problem Zain has
@@amruthkatari4343 If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Hey Jamin, I have a problem, so i am trying to free some spaceon my laptop so i was deleting a game that is 14,8 GB. When i press uninstall it says " cannot find utcompiledcode record for this version of the uninstaller". I don't know what that means, i restarted my pc and it still says that. Can you help me by anychance?
Try fully updating first as seen here and then try again; czcams.com/video/kX8bB725Ljw/video.html
@@PC_Monkey I am fully up to date and I have windows 11 pro
I put the new white piece in and when I put the key on top it goes all the way in and doesn’t bounce back out to make it ‘click’. Any idea what’s going on?
If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
My A jey fell down randomly and all the white spot is stuck in the key , should i unclip it or should i leave it like that ?
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
Hi my laptop won’t turn on it’s been charged I press the button but it stays off I don’t hear anything turn on if I think it’s the battery but if you have a video that describes my problem could you please reply to comment with a video link to a video that you suggest I watch it’s been like this for years and been sitting there since 2019,2020 I think
For a computer that does not turn on, try this video first; czcams.com/video/HHwzA37r4e8/video.html. Let me know how that goes :)
hi that little rubber thing is not glued on my keyboard can i glue it on?
There isn't really a good way to reattach those. They are not meant to be replaced. Best advice is try to use a small amount of glue. If that does not work, you may have to replace the keyboard.
where can i buy the retainer clips y i already broke one of them? :(((
I usually get most of my parts on Ebay, Amazon, etc. Dont feel bad either. Keys are soooooooo breakable :(:(
Hello. I had a issue with my e key so I lifted it and the rubber cup thing was loose. Is there anything I can do about it? It works fine without it (it’s stuck sunken). I know you mentioned it near the end of the video but is that all there really is?
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
Yes. You can try some glue but in most cases it wont work too well.
Tysm
My outer plastic piece of the key hinge broke apart into 2 pieces......could you possibly provide any help as to how i could assess it and maybe fix it?
The Hinge Clip came apart in two? Can you put it back together as described in the end of this video? czcams.com/video/tgymJB-78pk/video.html
hey uh my laptop c key is kinda dead i tryed this tutorial but i almost broke my c key i think
and i made it worse i saw like the circle button along with the other was not connected it just came of easyly can you help me?
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
my A key just randomly fell out and it wont click back. do you know where I can fix it at. please help me.
You can see in this video how to reattach a key. What part are you having an issue with?
when i do what the video says my key dosent go back on it, when ever i tap the top left or right of the key it becomes loose, i checked they key, the retainer all that its all intact i dont know what to do
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
A catclaw pulled up a key and I aot it together with your video, it snapped in good and stays as long as I do not touch near the bottom of the key. They it pops out. Any ideas?
If the key assembly is not installing correctly, its either due to a component being damaged and needing to be replaced or a component not being orientated correctly. I would disassemble the key as seen here in this video and inspect for damage. If there is no damage, install the key. If there is damage, replace the key. Would you like help locating a key? If so, what is the brand and model for your computer?
What if my rubber spring is not very sensitive on one key? I tried taking off the key cap, and i isolated the problem - it is the spring/rubber lid mechanism. Should i remove the butterfly clip or is it a lost cause. It does respond, but I have to press very hard.
Does the key feel like its working correctly or does it feel like there is something mechanically wrong with it?
@@PC_Monkey wow, thanks for responding. I can't find this exact problem in forums. The only one that was similar that I found suggested the spring might be corroded.
It feels normal, I guess, but it lower clips of the cap are loose. The thing is, even if I remove the hard key cap/cover, and just press the naked rubber spring cap, the behavior is the same. I have to press the bare spring cap hard too to get the key to register a press.The nerd in me would love to figure this out but I think this might be a list cause. Do you have any ideas?
Thanks again for responding! I'm so impressed. Thanks
@@hystrionic If its hard to press down, then the key assembly is not installed correctly or damaged. I would disassemble it as seen here and inspect for damaged. If needed, I would remove another key cap and compare its still install Hinge Clip to mine to make sure its installed correctly. After installing it, if its still not working properly, its most likely damaged and should b replaced.
@@PC_Monkey thanks for getting back again so soon!
I'm sorry if I wasn't clear: there's no issues pressing it. Both with and without the cap on, the rubber covered spring goes down normally. What is odd is that they character doesn't register/display unless I get a little aggressive with the pressure. It can work but only with elbow grease. I can't see anything obvious with the pressure, I think there's an issue with contact at the base inside the mechanism but I don't know enough to figure out what exactly, or if there's anything that can be done. With the cap on it feels just like the other buttons.
One thing worth noting: this is an "e" key , and before cleaning the keyboard yesterday the "7" and "c" were also not very responsive. But cleaning those two mostly fixed the issues. The "e" is being stubborn. Is there some common circuit they share? The "d", however, is completely fine.
For me the upper and right areas for the keys are weak. when i press on the S key on down or left it will pop out of place
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Please reply but I broke the metal but that holds the clips what do I do
If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
I know i am late but i need help my key got removed at the clip is attached to the key cap what to do
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
one of my key has a problem, It's loose due to the small metal lock of the key, one of the four is broken. I need helpp
1. If your key assembly is loose, can you try removing it and reinstalling as seen here?
2. If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Um how do you remove the white plastic part where its stuck to the key?
The hinge clip? Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
Where can I get replacement retainer clips
I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Okay so whenever I install the retainer clip and put the key back on when I press on the upper part of the key the lower part just goes up and lifts the retainer clip up with it any ideas on how to fix that?
If the key assembly is not installing correctly, its either due to a component being damaged and needing to be replaced or a component not being orientated correctly. I would disassemble the key as seen here in this video and inspect for damage. If there is no damage, install the key. If there is damage, replace the key. Would you like help locating a key? If so, what is the brand and model for your computer?
@@PC_MonkeyAll I know is that my laptop from Dell and it’s an inspiron 15
@@PC_Monkeyok so I found out that my retainer clip is broken and now I need help finding a replacement for it
Hey I did everything in the video but hinge clip keeps coming off when I press the bottom of my key how can I fix it?
If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Hi bro, uh recently my W key came off with the retainer still attached to it. It goes in a bit and after some Presses , it comes back out please help me bro
Assuming the key is not damaged and does not need to be replaced, can you reinstall it as seen here? Note: You will have to seperate the Hinge Clip from the Key Cap as seen here using a small pry tool before trying to install it.
@@PC_Monkeyhi uh, my a key just fell off how do i separate the hinge and cap i dont know how to do it without breaking it. Uh also my key cap has lips on the edges so idk how i can use a flat thingy
@@col2650did u get any sol i have same prob
Im kind of confused bc the retainer clip came out WITH the key, what do i do?
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
Thanks bro
Your welcome !! Happy to help :)
Thanks for posting this! I have a key that fell off with the retainer clip inside of it... so the retainer clip and the key are connected and fell off. Do you have a video for how to fix this?
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
I have the same issue, the retainer clip is stuck to the key and i cannot get it off. Maybe it is glued. I called Dell and they want to replace the entire keyboard. I said "No way". I am thinking to glue the key to the rubber in the middle. It is the "Alt" key, I do not need to use it again in case it does not work.
@@scc2694 Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
i tried doing this and it the white part was just not staying on. The place were the wider metal pieces are just did not want to stay on nor did the plastic part on the actual key. I'm not sure why.
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
@@PC_Monkey Thank you, I will try the method provided!
@@datariancan Good luck !! Let me know how it goes :)
what is the name of the white piece?
The Hinge Clip?
Hey, I know this isn't the right video for this comment but earlier today I ran a diagnostic on my dell laptop and it said one or more errors occurred when I was testing my memory. If you can make a video or comment a solution I would appreciate it. THANK you.
Btw my laptop is a dell L400 8th gen
Is there anything wrong with your computer that you were trying to troubleshoot by running that test? If it says errors with your memory, I would remove one of the RAM sticks and run the test again until you find the one that has the issue. Then I would replace it.
THANK you
@@CHOCOLATEKINZ Your welcome !! Happy to help :)
bro i am too small to do this and my parents are kind of care less they haven't replaced the r key from a year though i keep reminding them can you plz help me
What kind of help would you like?
My W key has come loose WITH the clip still attached to it. I’ve been able to carefully remove the clip (so they’re two separate pieces) and follow the rest of the steps in this video. But then the W key falls off again after a little wiggling WITH the hinge attached again. My problem is that the hinge won’t stay connected to the actual laptop. Do you have a fix for this?
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Pls reply, my retainer clip is stuck in my key. Whenever I put it back in it comes back off after a few clicks.
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
@@PC_Monkey oh ok. I'll hold on with it until I get the right tools don't wanna break it.
What type of glue
Any plastic or craft glue you have would be ok to try although that is not considered a good solution as glue may stop the hinge clip and / or the rubber spring from working correctly. If at all possible, you would avoid glue and replace the key assembly.
One of my keycap is craked so will i be able to change that at a Dell store or am i stuck with it. Btw it does not affect typing in any major ways but it is inconvenient.
I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Can I upgrade RAM chromeBook samsung please talk
What model Samsung Chromebook do you have?
XE303C12 A01SA
@@ktoo_gahr No. From what I know, the RAM in that computer is a part of the motherboard and cannot be independently replaced or upgraded.
@@PC_Monkey Well can I upgrade my motherboard?
@@ktoo_gahr If your computer comes with a motherboard with higher specs then yes. You can search for that on sites like Ebay, Amazon or on the manufacturers website.
Damn,I got problems with the J and K keys.I accidentally spilled mayonnaise on them both and now their bottom is sticky as hell.That means every time when I press on them it would take a few seconds before the button pop back up again 💀
Good luck cleaning them! And be careful! Keys are soooo breakable :(
soooo uhhhh my head decided i look at a tutorial after i broke a pin thingy and i removed that rubber thingy. so, would there be a fix?? 🤣
i kinda managed to fix it buy my key is crooked and harder to press (caps lock key on latitude e5440)
@@strongy-dr9nz If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
Hey i have a problem my laptop is gen 11 and the back parts are different can you pls help
How are they different? Is it a different hinge clip design?
@@PC_Monkey yes sir
@@zayanshiard3925 How is it different? You can also post a video to your own CZcams page if you like and message me back here when you do. I can then view it and advise further :)
Ok i uploaded a video
@@zayanshiard3925 Thx! The hinge clips look pretty much the same. However, the two little plastic pins on one of them look like they have come out of the other part of the hinge clip. They would need to be put back together for the key to be reassembled correctly.
bro but its not fitted correctly when i click from lower side its comes out
If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.
Only problem is the key that came off mine is one of the F keys at the top of the keyboard. They’re much smaller and shaped differently
The Hinge Clip will be smaller, yes. Some function keys are even installed sideways compared to the letter keys
This doesn't work for me please help!!!!!
What does not work for you? Are you trying to reinstall a key assembly? What is happening?
Hey, Jamin. In 2021, I experienced this problem with my dell computer, that is, certain keys (b, f, m, and n) weren't working on my keyboard. So, I took it to a computer repair shop, and they suggested I replace the entire keyboard, but instead, he sold me a separate, independent keyboard that plugs into my computer.
Yes, an external keyboard is a good idea when troubleshooting why a keyboard is not working. Did you ever manage to get your keys to work properly? If not, do the keys feel like they are physically fine or do they feel like they have something mechanically wrong with them?
@@PC_Monkey I don't know because the computer repair guy only told me that my keyboard needed to be replaced or I had to use an external one. Nevertheless, I paid for the external keyboard that he sold me inside the shop. It is still working today. However, had I watched your video prior to 2021, I probably would not have needed to take it to the repair shop. Might I add, your videos are very helpful in guiding people in repairing their computers themselves.
@@rhondae8222 Thanks :)
exactly what im experiencing
Bro u get pxe e 61 and pxe mof error pls help
I dont understand your comment.
@@PC_Monkey brother actually my hp pc gets error pxe e 61 and my pc doesn't boot
Can you help ?
@@Girish-xi1zd That happens on startup? If so, can you try the steps seen here? czcams.com/video/_qF-oqPrn7M/video.html
@@PC_Monkey thanks for your effort, I have already seen that video. It didn't work I have to reinstall windows now
@@Girish-xi1zd The diagnostic test didnt work? How did it not work?
i put my loose key back on but when i click it it is still loose
If the key assembly is not installing correctly, its either due to a component being damaged and needing to be replaced or a component not being orientated correctly. I would disassemble the key as seen here in this video and inspect for damage. If there is no damage, install the key. If there is damage, replace the key. Would you like help locating a key? If so, what is the brand and model for your computer?
The white thing wont snap in :(((
If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.
best
Thanks !! Glad this video was helpful :):)
🙂
:)
bruh my key t he hite think was stuck on the key
Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.
❤❤❤
Phony
un ya ok. this was a fake key, a fake keyboard, and a fake screwdriver LOL
i love it iq of online ppl sometimes lol
Ty
Your welcome !! Happy to help :)
can you contact me somewhere i need to ask you something my w key does not work and something broke
1. For free, I communicate here on YT. If you would like to set up a time and another place to chat, there would be a fee. Which would you prefer?
2. If you prefer here, what is the issue with your key? Do the keys feel like they are physically fine or do they feel like they have something mechanically wrong with them?
@@PC_Monkey so basicly that little thing fell apart in two
6:29
@@PC_Monkey and i cant put it together
@@ludaleoncina614 If you cant put it back together then you may have to purchase a replacement. I usually get my keys on Ebay or www.laptopkeys.com/. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.