How to properly prepare a construction opening for cladding frames and doors

Subscribe to the Opodlahach CZcams channel (click on the link in the next line):
/ @opodlahach
How to properly prepare a construction opening for cladding frames and doors?
In this video, you will learn more about how to properly prepare a construction opening for fitting a door frame. I will tell you what the correct width and height of the construction opening should be and you will also learn more about what standards exist for the door, and how I can supply the maximum height of the door for your construction.
Few people realize during the construction of their family house that the very opening in the door frames and doors is created at the very beginning of the masonry of a rough construction, but the door is installed until the very end just before moving in. Therefore, I would like to point out that at the very beginning, you should carefully consider the entire composition of the floor, from insulation to the final flooring itself, and do not change it, because in the end it will happen that due to your additional change, the building opening will be poorly prepared.
If you have any further questions or ambiguities regarding construction openings for cladding doors and door frames, feel free to write to me in the comments below and I will try to answer them as soon as possible.
If you would like to have the door with frames for your building priced, feel free to email me at [e-mail]
The company MS Interier s.r.o., in which I personally serve my customers, is located in Žilina on Janošikova street number 19. Home web page:
www.ms-interier.sk
Floor Blog Home:
www.opodlahach.sk
Eshop About floors:
www.opodlahach.sk/shop-2/
Opodlahach.sk on social networks:
Facebook - / opodlahach.sk
Instagram - / o_podlahach
Music used in the video:
- free audio library of the LUMA-FUSION application
- free CZcams audio library
#doors #opodlahach #frames #buildingopening

[@HalasDusan-pq8wp]

Parádne video daj ďalšie videa natoc video jak sa robia dvere zarubna drevena do doelni ďakujem

[@premysljanko1284]

díky, pěkně vysvětleno

[@ondrejsakala3980]

Vdaka.

[@lukast.1954]

Super video, mám otázku akú osovu vzdialenosť odporúčate pre zásuvky a vypínače hneď vedľa dverí? Ďakujem

[@Opodlahach]

Všetky štandardné zárubne prekrývajú otvor po stranách cca 3 cm stenu, za predpokladu, že je riadne nachystaný otvor (napr. pre dvere 70 je otvor 80 cm). Doporučujem os zásuvky dávať cca 15 cm od kraja ostenia. Je krajšie podľa mňa, keď medzi zárubňou a zásuvkou je jemná medzera, ako keď je zásuvka natlačená na zárubňu.

[@martinhryzak6287]

Obloškove dvere od 0. = od 202-max 204,205...obloškova PL zarubna je vysoká 1995 mm

[@Opodlahach]

Na STN 1970 mm musi byt otvor 202 cm je ideal a max 204cm ale vsetko zavisi od sirky oblozky.
Pozor rozlisujme dve veci pri PL zarubniach. Jedna vec je ze ci sa bavime o polskom produkte alebo o polskej norme. Polska norma je 202 cm svetla vyska po osadeni zarubne, teda otvor musi byt 207 cm vysoky.
A co sa tyka polskych dveri tak to neznamena ze musia byt v polskej norme pretoze aj PL vyrobcovia vyrabaju obe normy STN a aj PN teda slovensku resp cesku a aj polsku normu. Preto si davajte pozor pri kupe dveri v polsku aku normu kupujete.