COSTCO Easy On gutter guard review after 3 years- Keep your gutters clean for years!
Vložit
- čas přidán 7. 07. 2024
- This Universal Easy on gutter guard by gutter glove. After 3 years up installation let's take a look at how well they are holding up! I've tried a few different solutions, and this seems to be the best DIY gutter guard on the market. This guard keeps out roof grit and larger, no more leaves or tree debris! Keep your gutters clean for years to come with the micromesh stainless guards backed by a 25 year warranty. #gutterguards #homeimprovement #diy
I have provided some links below to the various items shown in the video. Please know that the Amazon links are affiliate links, and a portion of the sale is paid out to me in commission and does not affect the price you pay for the product. Purchasing these items through the links (or anything after using the link) is a great way to support the channel and allow me to bring more content to you all. Thanks, as always for your support!
Gutter Guard:
amzn.to/3zQ6d9U
Costco:
www.costco.com/easyon-gutter-... - Jak na to + styl
![How are Consumer Reports Best Gutter Guards, LeafFilter & GutterGlove, Performing in Tests? [S1 E9]](/img/n.gif)
Agree 💯. I’ve had mine for about 3 years also.
Great product, thanks for stopping in!
I've tried all the others- these are next. Thanks K6
Thanks for stopping in! Hopefully you see the results i have!
Good info Kyle !
Appreciate it, thanks for stopping in!
Thank you!
Thanks for stopping in!
Nice product and nicely done.
Thanks Mr RMD!
THIS NATIVE-BORN IOWA BOY, LIKES THIS VALUABLE VIDEO INFORMATION. PUTTING NEW GUTTERS ON THIS SPRING AND SAVED THE LINK. THANK YOU! NEW SUB. FROM THE 641.. ALWAYS THUMBS UP!
Thank you for stopping in and I greatly appreciate the feedback, glad you found it helpful. Always good to meet another Iowan!
These are absolutely amazing.
Thanks for the info! Definitely subbed!
Appreciate it, thanks for stopping in!
I got my own Gutter Company here in New Jersey and when people ask me about Gutter Guards I always recommend this ones they are the best and never have any problems or complaints from customers 😎 It’s a little bit expensive but in the long run is worth it 👍
Glad to hear your experience, thanks for stopping in
Check back in on those customers a few years later. Guarantee you will not like the results inside the gutters.
I do roofing and we sometimes have to remove the covers to replace the roof. This system created the perfect hydroponic system inside the gutters
... thank you for your efforts to help get the right gutter guard ... and the follow up report with film ...
Appreciate it and thanks for stopping in!
Thank you for your video!! 💯
My pleasure, thanks for stopping in!
Bought the same material from home depot. Did some searching on the net, and found the cheapest on line with home delivery from HD.. This is a SUPER PRODUCT. I believe that it comes in 4ft sections. I installed it under a new `MAN CAVE' shop , with a metal roof. I do recommend using both the 3M strip, and self tapping stainless steel screws. Not the ones that come with the screens.
Ive had great luck with it, thanks for stopping in!
Sir, these are great gutter guards and great field house demonstration 👌😇👍 Cheers 🍻🍻
Thank you sir! Hope all is well!
Live is WA with lots of rain right now, no over flow of water coming over the gutter guards. Best thing we did this last summer.
I have found them to be a great investment as well, they work extremely well. Thanks for stopping in!
I have a 2 1/2 story high gutter height on my house, made some "leaf guard" type covers from aluminum with a brake, and they didn't work as well as I wanted. I bought the costco ones about 8 years ago, rented a lift and had them up within one day, and they have worked great since then. I did also put a de-icing cable on a north facing roof edge and gutter, being in Chicago, but the Costco gutter guards didn't cause any issues with letting the cable thaw out that part of the roof for winter drainage.
Great to her another success story with these, ive been extremely happy with them. Thanks for stopping in
Thanks much, excellent video
Appreciate it, thanks for stopping in!
Great info and review, thanks again for taking the time to make this very informative video 👍👍👍❤️❤️❤️🙏🙏🙏
Thank you for the feedback and thanks for stopping in!
Thank you for taking the time to film and post this. Current price shows about $70.00 for 24' of 5" so for for not much money this will help cut down on the chores. A good hard rain will wash out the small items that might get trapped.
Appreciate you stopping in! Ive been very happy with them myself and would highly recommend them based on their performance. It's nice to take things for the chore list and items of worry.
Thank you for posting this helpful video!
Glad i could help, thanks for stopping in!
Got them too. They are GREAT. Biggest issue was cutting them. Having 75 year old hands, my strength wasn't what it use to be. Installed a metal blade for my chop saw and it was easy.
They can definitely be a little tough on the hands if you have alot to cut. Thanks for stopping in!
An angle grinder with a metal cutting wheel works great.
To cut for installation, I first used my angle grinder with a cutting blade. Then swtiched to my Dremel Rotary Toll with a EZ Lock Metal Cutting Disk
36 feet for around $50 at Costco when it was on sale. Said on sale couple times a year.
cool man! thanks
No problem, glad to be of help! Thanks for stopping in!
I have had them own my house for five years...Works great! I have installed them for friends as well. Outstanding and well-priced! Cheaper than Gutter Guard ( $350 for my house, 5 hours install...Gutter Guard would have been over $6K!).
Appreciate your feedback on how they are working for you, thanks for stopping in!
I’m confused. This was ‘Gutter Guard.’
@@glasshalffull2930 here is an example of the product www.gutterguard.com/
My sister and brother in-law had their roof redone. The roofer had a recommended gutter guard which was very similar to this one in the video. The roofer's price for installation of the gutter guard was $4000. They thanked the roofer for the information and my brother in-law went online to check out gutter guards. He ended up buying the ones from Costco and it took him two days to install the gutter guard sections. He was a little short and wrote the manufacturer a letter and explained his situation and he was able to buy a small section from the company to finish his project.
Recommending these to my neighbor.
Thanks for stopping in!
I have them and agree they are great. I DO recommend using the screws, but you need a drill bit to speed the job.
Great to hear your experience with these as well! I've had great luck with just the adhesive but the screws are good as well! Thanks for stopping in
In the pacific northwest they plug off with algae and moss in less than two years, I had to take them down because water could not get in.
Great to know, thanks for stopping in!
I installed this on my home last November after getting a new roof, they are absolutely amazing, I purchased from Home Depot. I cut the aluminum frame off the back edge so that it wouldn't lift up my new shingles as much.
Glad to hear your experience, I am absolutely thrilled with how mine work! Thanks for stopping in!
After moving to "snow" country, and in our newly built home, the gutters would load up with snow, melt just enough to fill the gutters with ice and then as the snow was melting, it was running all over our front porch and refreezing, giving us an ice skating path! Problem solved with THESE Gutter Guards from Costco! I zipped tied a roof heating cord under the gutter guards and anytime it starts to snow, I turn on the heated cord and that melts the snow on the gutter guard, allowing it to drain through my down spouts (which also have the heater cord in them) and for the last two seasons, we have had very little issues with the melting snow off the roof, turning into ice on the front porch!
Great idea and solution! Thanks for stopping in!
Your installation was very good. The real benefit is on homes that very few trees around them, especially maples and pines. I have a few customers with trees all around their home and to be honest they are a mess. The debris sits on them fairly often and my customer has me come over and clean off the tops. The screens unfortunately also are collecting silt and mud from thre roof and it creates areas where the screen is filled in so much water does come over the guard and onto ther sides of the gutter. The quality of the product is very, very good. But it is the conditions of where you install, how you install them, pitch of the roof, all sorts of factors. Installation skill and attention to detail I have found is very, very important in any installation.
I agree, attention to detail on the installation is important for the longer term use. Thanks for the comments and stopping in!
@@k6outdoors I think the most important thing is the pitch of the installation. It *must* be at the same pitch as the roof! Otherwise,the gutter guards act like a shelf,and crap builds up.
I put these Costco leaf guards on one of my gutters about 3 years ago. I totally agree that the quality is exceptional and they go on pretty easy. Just a couple of points. Make sure you clean that top edge of the gutter thoroughly so the adhesive on the leaf guards adheres securely. Also, as he put a few screws in near the downspouts if the need arises to go into the gutter to fix any issues, I, on the ends pieces near the downspouts cut the red covering on the adhesive strip about 4-6 inches and peeled them off. That way those last guards can be easily pried off to get into the gutter if necessary as most of the guard was not adhered with the adhesive strip. I have had absolutely no problems with the guards staying in place and like the man says, almost nothing accumulates on the gutter guards.
Glad to hear your positive experience, appreciate you stopping in and commenting!
Have em on my house going on 4 years now used the adhesive strip, work great, we have red oaks & maple trees in our yard, neighbors have locust trees with them miserable little leaves & a few huge oaks. like the guy said NOTHING gets thru the mesh. I go up in the spring & fall with the blower and remove leaves & whirlybirds. if you have heavy snows 4" to 6" get a snow rake and REMOVE 3' or more of the snow from your eaves & you won't have to worry about ice dams. the stainless steel mesh can be tough to cut so get some GOOD shears...
Good to hear another persons feedback! Thanks for stopping in
@@k6outdoors To cut for installation, I first used my angle grinder with a cutting blade. Then swtiched to my Dremel Rotary Toll with a EZ Lock Metal Cutting Disk
Have these on my garage gutters. They work great as a leaf guard but not against coniferous needles. Living in Vancouver or any area with conifers you still have to clean the needles off the TOP of the guard. Needles do not get INTO the gutter itself.
Thanks for sharing your experience with the gutter guards! Appreciate you stopping in
I have to give them an F for winter and an A for summer and fall. Here in St. Paul Minnesota I have a problem with the guards icing over which then causes any melt water to run over their edge rather than down into the gutter. The water then creates an ice rink on my sidewalk. With open gutters for the last 30 years I never had any ice on my sidewalk, but I also had to be up on a ladder twice a year to clean the leaves out. I love the guards for most of the year but they are a pain in the winter. Next time I think I'll go with the helmet design.
Good to hear the feedback a little further north, normally any frozen ice on the gutter guard melts off on a good sunny day for us. Thanks for stopping in and stay warm!
@@k6outdoors LOL! the ice sets in and doesn't budge for weeks. That said it's not worse than when gutters are full of leaves. It's a good product so far after 2 years. I just remove the guards after leaf falling season from the areas that are prone to ice build up.
exactly the small mesh ices up and closes off and the snow melt just runs over the home....
@@MrKco63 I may try painting the screen black. Might help a little on the sunny side of the house
The helmut is a breeding ground for wasps and shingle dust gets I there
Installed these about 5 years ago. Overall, really happy with them, but just this past week while blowing tree pollen out of the roof valleys i noticed that there appears to be what looks like lichen starting to grow on the mesh especially on the north side of the house. Need to dig to see how to inhibit that from spreading and filling the mesh.
Thanks for sharing your experience and stopping in!
I always use the screws. After many years you will get fine material build up in the gutters if you are near trees. Think about the way a river fills up with silt. When you install these, use gloves to avoid tiny metal splinters.
Appreciate the feedback, thanks for stopping in!
Would be interested in seeing you do install. I guess it would be better to wait if you needed a new roof in next few years. Can you see through mesh to see in the gutter?
I plan on doing an install video in the spring! You can see through the mesh! Thanks for stopping in
These gutter guards work well. However with long valley runs in a downpour will overwhelm the gutter guard, allowing water to flow over the gutter. This can be an issue depending where this water lands.
You are correct, the do make a diverter to help distribute the water in the valleys, I just haven't had a huge issue with it. Thanks for stopping in!
I bought these about 2 years ago. I only installed in front of my garage when I discovered my fascia boards were made with pressboard which has rotted away over time. So, I have to pull the gutters down to replace the fascia boards before I can install the rest. So now a squirrel has made his home under the the garage section which has been installed.
I do worry about the roof peeling off in a wind storm after a partially putting it between the shingle and the starter strips, that it’s losing some of the adhesion.
I can see why you'd be concerned about shingle adhesion issues. What i can tell you is that while mine have been installed they have experienced 100 mph winds with no affect to the roof. Thanks for stopping in!
Would love to somehow correspond with you regarding this same exact problem- fascia and squirrels.
@@user-jl5lh9mq2b Take the number off my user name, and that's my Gmail account. I found a second squirrel entrance. It's been a big process of taking down the gutters, replacing the fascia and soffit with LP Smartside soffit boards cut to size, and putting the gutters back up. I've completed the east, west, and most of the north side of the house. I put some of the gutter guards up, but want to wait to finish the north side, as that is a connected gutter for almost 3/4 of the house. While I had the soffits down, I also nailed in the sheathing at the top to help the air sealing of the wall cavity, and spray foamed it.
There is one section where squirrels got in before I bought the house, where they could stand on the roof and chew their way in. I coated the trim over the soffit with copper mesh that squirrels don't like to chew through, then painted over it.
@@k6outdoors Good lord!! You got 100 mph winds at your house?!
How much damage did you have to your trees?
It seems like everytime we get winds over 70 I'll lose a limb or 2
@jeffa847 we got very lucky actually, we just lost a few branches. Most of our trees are deeply rooted in our soil here in Iowa. My inlaws live about 45 minutes from us and had sustained winds of 145mph for over 30 minutes. The unfortunately had hundreds of trees to clean up, many trees were completely uprooted and on their sides! The storm was classified as a derecho, basically an "in-land" hurricane.
Thank you for your video presentation. Did you wipe the gutter clean before you installed them so the adhesive would stick better?
I did use a cloth that was damp with alcohol to wipe the edge down prior to the installation. It was easy and effective, thanks for stopping in!
new here...nice looking yard
Appreciate it, thanks for stopping in
I was hoping that you’d demonstrate how they snap in
That video is in the works, extremely simple process.. stay tuned
Great infomercial!! How about showing how to install? I don't need to know where they were purchased. I need to know how to install!
Thanks for the feedback and thanks for stopping in. I have 50' more to install and plan on doing it in the spring.
Just ordered these and GO HAWKS!!🤘🏼
Go hawks! Thanks for stopping in!
Great video review of these guards. What size gutters do these sit on?
This specific version is for 5" gutter, thanks got stopping in!
Wow 😳😳😳👍👍👍👍💥💥💥💪💪
Iowa my home state! Go Hawkeyes! Thanks for sharing this we will look into these for our gutters!
Go hawks! Thanks for stopping in!
The gutters on our 150 year old farm house are hung by straps that are screwed to the metal roof, rather than screws that go into the rafter ends. Would these be adaptable to this situation? We don't have any trees close to the house, but leaves blow in from the woods, and the downspouts get clogged. IB old, and climbing ladders two stories isn't something I'll do anymore. Can't find a handy person to clean the downspouts... Sigh.
Checkout this link to see the different applications, maybe itll work out for you. www.gutterglove.com/diy-products/
Thanks for stopping in!
Should those gutter guards be removed prior to replacing shingles? I would hate for them to be damaged in the process. Though, I would also hate to remove and reinstall the guards after the roofing is done!
I can this type of gutter guard having some serious problem with freezing rain used in conjunction with a metal roof.
To be honest, I am not sure I know of any gutter system that is at top performance when subjected to freezing rain, thanks for stopping in!
@@k6outdoors Me neither, but this one seems a little worse than some others based on design. The raindrop looks promising, but I don't have any experience with it. I would like to see a gutter guard company come out with dime size holes to be used in non-pine landscapes.
My shingle edge is sealed to prevent hurricane damage. Can these been installed without tucking under the shingles and breaking the seal?
The concept is designed to be tucked under the bottom row of shingles; unfortunate they may not work in your application. Thanks for stopping in!
How about in the winter.....my problem with these guards is this....do they ice over and create ice dams?
They certainly can, much like any gutter guard. I havent had much for issues and if i have its been a result of a bad ice storm and it shortly melts away
Is the water able to get through without problems? Will the grit eventually clog the pores?
I have not had to clean mine off yet, depending on your debris you may have to clean them to maintain flow of water. Thanks for stopping in!
I wonder about helicopter seeds getting stuck in holes. I know you brought it up but then said leaves. Do the seeds get stuck?
No issues with the helicopter seeds! The protect very well against them and don't clog up the mesh. Thanks for stopping in!
Do they sell a high flow for inside corners?
They do have an addition to help distribute the water for valley areas. Thus far i havent needed it, thanks for stopping in!
Do they freeze over in the winter? I have a gutter cover now that during the melt freeze cycle the gutter covers ice over and i worry about moisture migrating up under the shingles/
Unfortunately, I think any type of gutter protection is going to have some ice dam issues in the winter, just due to the nature of how they work. I have seen several people use a heat tape to keep it from freezing and it might be something you consider if you are concerned about the ice issues. Thanks for stopping in!
Could they be removed during the winter??
Wouldn't even a little overlap being better (for strength) just asking.
Thanks for the video
There is a designed in amount of overlap, anything more than that would require further modification of the pieces. Thanks for stopping in
@@k6outdoors thank you for the reply
Each side of the piece has a bit of screen sticking out so the aluminum frame almost touches, but the two sides of screen can overlap to close any gap.
I just installed about 135 feet of these things. Very easy to install. Easy to customize for getting around corners or ends that need you to shorten one.
I used the self tapping screws to fix them down (mine did not come with adhesive), but the screws were very easy to use and they include the magnetic driver bit.
Do you install from left to right or right to left? Looks great
They can be installed eitherway as the overlapping joint is universal. Thanks for stopping in!
Do long thin pine needles get through?
@@ridegriff50 I have no direct experience with that type of tree debris, but I suspect they will NOT pass through the micromesh
With a heavy rain, downpour, does the water wash over the guard? I have a 12" pitch and water runs down fast and in high volume.
I have never had an issue with water volume. Thanks for stopping in
Started installation last summer and part way through the job we got a thunderstorm.The heavy rain flowed over the guards like a waterfall. Stopped my install and ripped out what had been done.
When moss spores get in, how do you clean them? As a professional home inspector, I do not recommend gutter guards since you can not remove moss.
Interesting, our home inspector recommend we install them due to the trees near our home, it all seems like personal preference. Also, we don't have a moss issue in our area. These also have the option to screw or adhesive mount them, so if screwed on its easily done. Thanks for stopping in
Those are the best gutter covers I’ve seen.
Still wouldn’t work for me. In SW Ohio water would shoot across those gutter-guards in sheets.
Plus I noticed your house doesn’t have corner dams where the valley empties into the gutter.
Corner dams are little pieces of aluminum on the front edge of the gutter so the water doesn’t over-shoot the gutter.
Gutter guards are pretty much a no-no around here.
You’re more likely to see multiple down spouts.
No trees overhanging the house.
“ Rain Gutter Cleaning” advertised on TV.
The first thing is to divert the water.
During a storm if you look out the window and it looks like you’re under a waterfall, you have a problem.
Hey, I appreciate the comment. We do/ can get torrential amounts of rain here in Iowa. The only time I see any sort of run off it is in the valley when it's raining so hard you can't see straight, otherwise the flow the remaining part of the gutter is un obstructed, you can literally spray a garden hose right at it and it passes straight though. 5" and 6" gutter with 3"x4" downspouts are common around here. I definitely could benefit from adding corner dams but haven't had a large enough issue to worry about it. Thanks for stopping in, I appreciate it!
I thought the new Costco gutter guards came with a bend already applied?
They have a bend from the factory but depending on your roof some additional adjustments may be required. Thanks for stopping in!
Go Hawks!
Go Hawks!
Kyle. Fellow Iowan here. What's your experience with these in the WINTER been? I've seen reviews saying that they don't do well with snowfall/ice.
Hey there! I have been very pleased with them. Generally, if any snow or ice gets on them, they readily melt off on a sunny day. The instructions specifically states they can cause icecycles and ice dams, but all forms of gutter guard will. I personally recommend them based on my experience and plan to put them on my detached garage in the near future. They work so well during the spring and fall of keeping all of the debris out that any little headache from them freezing over is negligible to me. As I am sure you are aware, ice dams can be a problem but most newer homes (built after the 90's)in iowa have, ice water barrier under the 1st 4ft of the roof and it mitigates any concern of water going back up under the shingles. Hope this helps!
@@k6outdoors It does. Thanks Kyle. I'm gonna give em a try. Where abouts in Iowa are you? I'm in Des Moines
@@andyzamboknee i am near Iowa City
605 yes dont like how thick the roof lip is. Low roof line i get water blown under shingles
Thanks for stopping in!
How does it handle a very heavy rain? runoff?
It handles it very well. The only place where any runoff occurs is in the valleys, but that is fixes with some diverts you can install. Thanks for stopping in!
How well does it catch the rain I'm in Tampa and when it rains it pours
Thanks
Extremely well, ive never seen it run over the front of the gutters. Thanks for stopping in!
@@k6outdoors Thanks
How old is the boom box on top of that cabinet ?
It's right around 20 years old, I got it when I was 13 or 14 I believe!
Will this install under a concrete tile roof?
Check their website and it'll show you how it all will work! Thanks for stopping in!
Question, the included self taping screws. Are they also stainless?
I am not sure what they are made out of, but I presume they are not stainless. Thanks for stopping in
@k6outdoors excellent thanks! I'm looking to install these. They seem to be on sale for 40 bucks a box. Another question though, if you don't mind.
Each box contains 36 feet of guard. I assume that's 36 foot of gutter length? So my garage is about 20 x 24... it may only take what 3 boxes to cover all my gutters?
@RompRat42 in theory yes it should cover that much. Corners will make a little bit of a difference, but not much. How many sides of your garage has gutter?
@@k6outdoors all 4
@@RompRat42 seems like you might need 4 boxes
How easy it to cut the gutter guard material for odd gutter sizes?
*do you get snow in the winter, leaf filter customers complaining of problems in winter, water freezing clogging and making a frozen slippery floor*
We do get snow and very cold weather, and gutter guard or really gutter for that matter risks freezing over and causing a slippery mess. I don't have much of an issue and if you do have a problematic area you can use heat tape. Hope this helps
@@k6outdoors Thank You 👍
You forgot to mention how you cut them and the tools used. Thanks
Checkout this video, thanks for stopping in. czcams.com/video/ef3EWlwZJ2A/video.html
Atlas shingles?
Yes, I believe they are
Does it keep out for needles? My gutter guards work pretty well but fir needles and roof aggregate still get through. Thanks!
Yes it should keep them out! Mine keep out bugs and roof aggregate!
The bad reviews say the mesh clogs and the rain runs over them
I cant say I experience anything like this. I just bought more to install on my garage as I have been extremely happy with the product. Thanks for stopping in
@@k6outdoors It will depend on the environment. Those that have dust which becomes mud with rain, mold, or in my situation live oak pollen which is gritty and becomes like a mud will clog up any micro mesh screens. So they will need to be cleaned to open them up. It will keep the junk out of the gutters, but unfortunately that will include the rain as well. All guards seem to have compromises. The other good one I hear about is Raindrop.
How well does it work for valleys
It works well overall, if it's a valley that gets a mass amount of water they sell diverts to help redirect some of the flow. Thanks for stopping in!
@@k6outdoors have diverges, but it just throws the water to the side.
@jammosu6498 yes that is the intent
What's the sale price vs the normal price?
Not sure specifics on price but can be $20-$40 off depending on qty and time of year
$199.99 for 100’ of 5”. WOW!
Is this a good wow or a bad wow lol. Thanks for stopping in!
What about snow/ice build
What about pine needles?
I cant speak from experience on this one but I believe it will keep them out. Thanks for stopping in!
The sap on pine needles clog the mesh in the valleys. This causes build up and water to overflow. diverters do not work as the needles build up behind it.
It just takes maintenance at the valleys. They do sell a brush for cleaning them up without getting on a ladder. Works for a while.
Until the leaves and seeds, etc, get wet and clog the gutter guards, and then you have to clean your gutter guards, lol
It has yet to be an issue over the years they have been installed. Thanks for stopping in
As a home inspector I have NEVER saw any kind of gutter screen not plug and overflow making the gutters worthless. Leaf guards overflow in moderate rains. They all overflow and still let debris in the gutters. Open gutters for the win and are much less work cleaning than messing with this so called maintenance free crap. The lengths Americans will go to just to avoid a little bit of work is really pathetic.
Appreciate your thoughts on the topic, oddly enough at time of our new home inspection it was recommended to add gutter guards. I have had no issues with water overflow and they perform extremely well in heavy rain. I also have had them installed for over 4 years at this point and have never had to clean them. Maybe it's just the area and situation I presented but I have had no issues with the maple leaves, maple seeds and dust from living in rural Iowa. Thanks for stopping in
@@k6outdoors I'm glad your having success but the recommendation of adding those from a home inspector is not normal at all. We meet regular for continuing ed and I've never seen an inspector in favor of these. I could show you many many pictures of all types of screens plugged holding piles of debris on them as well as water running right over the screen when its raining. I would guess you have minimal debris falling on your roof or the debris is somehow washing through and out the downspout, I could be wrong. Most homes that have these have heavy tree coverage that plugs them right up. If you have a house with gutters super high or hard to reach then I would tell you good luck, buy a different house. Modern houses and proper gutters do not mix very will thanks to the stupid architecture having gables and valley's all over the place making it impossible to properly shed the roof water away from the foundation of the house.
@@petebusch9069 I have a French drain system that 2 of my downspouts are tied into. I had gutter guards installed and the seams buckled and let debris down in my gutters. I don’t want my French drain to clog because that would be a lot bigger problem. Not sure what to do… maybe downspout screen?
@@basketballcomedy5618 Nope, you need to install regular gutters and clean them as needed depending on the tree coverage you have. The ad the told you cleaning gutters is a horrible job lied to you, its a fun and simple job that anybody can do. If your looking for a truly maintenance free system that doesn't exist with the exception of hiring a handyman to come over and do the periodic maintenance that you should be doing yourself. Stop living in the world of advertisements, they all lie to you.
@@petebusch9069 yeah it’s not that I’m worried about cleaning gutters. It’s the fact of having a French drain system because our house is on a hill. So we have hundreds of feet of buried pipe tied to our gutters that can clog from leaves and debris that I would rather clean the gutter or something above the ground than have to pay someone to come and clean the buried pipes we had installed
I thought disturbing the shingles voids the warranty..
Always error on the side of caution and understand the requirements for you brand of roofing. Thanks for stopping in
Okay well im going to let it be known for everyone. Dont do this shit bc it will void the warranty on your roof. Also, realistically Leaf filter gutter guard and all thats out there. They claim Maintenance fee and that is not true. Do extensive research because these sales men will take your money. If it sounds too good to be true. It probably is. Stay safe elderly! dont get scammed!
Gutter guards don’t cause ice dams. Cold spots in your roof line not properly insulated causes ice dams
Appreciate the feedback, thanks for stopping in
How do you know if you have a cold spot?
In my experience that’s not entirely accurate. My husband put something similar on our gutters not realizing that small leaf litter, bugs, roof grit can clog the drain holes. If not cleaned the ice builds up from the gutter up.
What if we went 21st century and make it so that the gutters will flip with the aid of piano hinges and a encased servo in the gutter powerd by a solar cell...
What's weird is that they don't sell a real 5.5 or 6 inch product. The 5.5 inch is only 5 inches and the 6 inch is actually 7.2 inches. Have to shove all the excess of the large unit under the shingles if your gutters are wider than 5 in
Yep, im not sure for the reason but i am sure there is one. Thanks for stopping by
9: 00 why is it indented?
Can you elaborate on this?
@@k6outdoors sorry the metal just concaves at the bottom of the slope. I would think it should be better to just be a flat slope?
@@WakeRunSleep that is by the design of the manufacturer for optimal water retention
@@k6outdoors ahhh ok ok makes sense!
Good video but you don't have pine trees. That makes all of the guards useless.
Thanks for stopping in
EXACTLY! The pine needles just lay on top and eventually decompose. This creates a fine grit that blocks the screen, so the rain just shoots over. To remedy this, you need to take a scrub brush to the screen, so that means you are up on the ladder. This happens multiple times each year. I'm taking mine off.
It's really warped. I don't see how it will go on.
Are you referring to product you are trying to install?
go Hawkeyes
Go hawks! Thanks for stopping in
Sir, your trees do not really present an issue, they are not even overhanging your house, so...
That is incorrect, I have 5 large maple trees that produce a ton of leaves and seedlings that readily fill the gutters. That is the main reason i added the guards to the house in the first place. Otherwise, why would i waste a large amount of my money on them? If you have trees overhanging your house, i would recommend you have them cut back or cut down so they dont damage your home. Thanks for stopping in
Garbage Guards they don’t work you still have to clean the gutters and they rot out your roof 😮
I sounds like something wasnt working correct in your situation. No issues on my end and I havent had to clean my gutters out in 3 years, which was done 2-3 times a year prior to installation. Thanks for stopping in!
Lol wait til he sees the pictures i have of that product, after we did a roof jobs.
Hydroponic vegetation system inside the gutters. Bwahahaha
The mesh isn’t fine at all.
It must depend on where you live then, thus far I have had 0 build up in 4 years.
I've had these on for three years and they don't work worth a damn with pine needles.
That is unfortunate, thanks for sharing your experience and stopping in
Ha you don't really have any trees. If you stand in my backyard and didn't know what my front yard looked like you would think I live in the middle of a thick forest a wall of green
Thanks for stopping in
You could have said all this in 3 minutes
Thanks for stopping in
They make the situation worse. Never install gutter guards. It’s a scam.
Thanks for the feedback, they have 100% resolved my gutter issues, definitely not a 1 size fits all solution. Thanks for stopping in
Talk, talk, talk...
Thanks for stopping in
How ‘bout them Astros…!
Expensive and will not work well with high pitched roofs or heavy rains.
Not sure what your criteria is for high pitched roofs. I've used it on 6/12 and 8/12 roof pitches with no issues at all. Heavy rain also has 0 effect in my experiences. Thanks for stopping in
Too much repetitive talking and didn’t show how to prevent water overflow flowing down from a roof valley onto a inside corner
Appreciate the feedback, I don't have much of an issue with valley overflow so it's hard to show you how to prevent it. Thanks for stopping in.
these things are crap. the debris, especially pine needles, piles up on the surface. As it accumulates, it moves toward the drip edge and creates an overflow path for the water, which ends up coming down onto your facia board and keep it wet. What's worse, the end of the valley runs will look like water falls as the water races down, hits that flat screen surface and flies over the edge of gutter, flooding anything below and of course messing up facia boards. Pine needles will absolutely stick in these little screens and accumulate quickly. The fix: the company sends you a free brush, which must be attached to an extension pole and used to clean of the gutter guards. Not sure how these are saving any work for people. Total waste of money!
Appreciate your feedback and sharing your experience. I dont have pine needles so I can't say I experience the same issues. Thanks for stopping in
I have these on my pole barn and they were great!!!!
I’ve been using them for two years too. I also don’t have pine needles to deal with but can attest that they work me. I’ve been pleased with them.
Interesting, I do have a pine tree way too close to the house so the branches hang over the roof. I agree the needles do stick into the mesh BUT it’s easier to brush them off, standing on the ground, than it was getting up on a ladder and cleaning out the downspouts. It also doesn’t feel like I need to clean them as often. I suppose I could cut down the pine but it’s not really an option and still remain married.
Interesting, I do have a pine tree way too close to the house so the branches hang over the roof. I agree the needles do stick into the mesh BUT it’s easier to brush them off, standing on the ground, than it was getting up on a ladder and cleaning out the downspouts. It also doesn’t feel like I need to clean them as often. I suppose I could cut down the pine but it’s not really an option and still remain married.