RPM Powersports Can-Am X3 Electronic Dump Valve Exhaust-Install & Review
Vložit
- čas přidán 15. 11. 2021
- Rpm powersports 2.5 inch Can am Electronic dump valve exhaust/midpipe.
Links below to exact exhaust !
This exhaust is awesome guys I couldn’t be more happier with it and the quality of it is amazing! I have included some info about it below if you have any questions feel free to comment and ask !
The Little Brother to the 3" E-Valve!
Transform the quiet stock sound of your X3 SxS to the mean sound of the 3 cylinder Rotax at the push of a button! RPM SxS has incorporated a high end fully electronic exhaust valve motor into our famous Big Mouth cat delete to do just that! You now have everything the famous RPM SxS Big Mouth has WITH a electronic dump valve! RPM SxS has maintained 2.5" all the way through by utilizing a custom exhaust gasket that mates to a stock muffler! This allows you to have the most free flowing mid pipe on the market and still be able to mate it to ANY muffler that accepts the stock mid pipe! This Stainless, TIG welded Cat Bypass frees up the absolute most HP and substantially lowers temperature radiating from the exhaust system. Any restriction, especially the stock catalytic converter after the turbo, directly reduce horsepower. The Big Mouth features alone will net you 6-7 wheel horsepower with the stock tune and valve closed. All factory heat shields can be reused! OEM, or our RPM Powersports slip on muffler fits straight to this cat delete with NO modifications!
The 2.5" E-Valve give you the option to run a stock muffler, and at the flip of a switch you unleash extra horsepower, 250+ more RPM's, and a deep sporty exhaust tone! Switch it back closed and you have a quite stock sounding machine! Unlike some, our dump valve system has a smooth transition from the mid pipe to the valve allowing for the smoothest and free flowing dump valve exhaust on the market. As it passes the valve the exhaust gasses will flow out our signature & beautiful fish tail tip! If you're running a data logger or accessory that requires a second O2 bung have no worries, all RPM SxS X3 mid pipes come standard with a 2nd O2 bung at no additional cost.
This kit comes COMPLETE all the way down to the zip ties to secure your plug and play harness! Easy to follow & full color instructions are included. Like all of our exhaust they have a LIFETIME, NO questions asked warranty!
rpmsxs.com/products/rpm-sxs-c...
rpmsxs.com - Jak na to + styl
Dang! If my X3 ever comes in I feel confident I could install this after watching! You’re how to vids are not matched by anything Ive seen, including old episodes of Trucks on Saturday mornings watching as a kid lol, well done! I like the option of having the captain’s call!!
Thanks so much buddy for that awesome comment I appreciate it very much ! Hopefully you get that x3 in real soon ! What did you order friend ?
Right on bro. U definitely know how to explain what, and how to do start to finish. Thanks. Keep up the great wrk my friend
This is great, that exhaust sounds so freaking awesome!
Thanks Vinny ! Yes this exhaust is so sick !! I Love it
Appreciate the video! Definitely considering this system now! Sounds legit!
That camera quality is CRISP lol. Your videos are always super informative too, some people brush over stuff, but you take the time to explain everything. Keep it up man and you'll be the face of How-Tos on side by sides!
Thanks very much buddy I appreciate it !
Hey dude great video! I’m very mechanically inclined myself just like watching stuff like this when I order new stuff. Lol. Thank you for these videos it keeps me entertained lol
Awesome thanks for your support brother !
Very good informative video, very easy to follow and well made. I like to see it 🤙
Thanks buddy I appreciate it !
Dude, thats sick!
For sure brother 🤘
Sound awesome man!!
Thanks buddy !
Love it! Thanks for the video.
Glad you liked it and Thank you for the sub !
I got RPMs 3” race /drag pipe because i like to obnoxious haha i cant wait to install it 🤘🏽🤘🏽. Watching your channel and having a buddy who has a YT makes me want to try and make videos haha who knows maybe ill do an install vid and give it a shot
Heck yeah buddy just get out there and give it a shot if it’s what you love doing go for it !
Soooo ill be spitting flames tomorrow. Lol thanks for the video.
Heck yeah brother ! 🤘
Very informative thank you
Thanks for the feedback buddy! Appreciate it
Thanks so much for this video. I just ordered my mid pipe e valve going to end it off with their sport exhaust. I went to youtube to find some install videos just to get some tips. Yours is the first i cam across, and honestly I dont need to go any further. Great stuff, appreciate the detail. Ill be checking out your other videos to see what else i can learn. I havent looked yet, but do you have an isntal video on your BOV? Keep up the great work!
Awesome thanks so much buddy , and yes if you go to my channel then select videos scroll down and I have the bov install on here ! Thanks
Awsome video I really like how detailed your videos are and another thing people probably don't notice is how clean your machine is all the time how do you do it make a video
Thanks very much ! Yes I keep my machine very clean it’s hard to do but I try lol than ask for noticing and be sure to check out my most recent video I’m actually giving this pipe away that I done this install on if your interested!
I just installed this very same exhaust and your how to is good but you did forget to mention reusing the exhaust gasket from the turbo side. It’s paper thin and very easy to miss. Other than that great DYI and I love the flame spitting beast mode :)
That is true I think I had it filmed and somehow the sound got messed up and couldn’t use the clip to say to reuse that gasket ! Thanks for the feedback buddy
Sounds good man, you're never gonna hear that BOV again. 😂
😂 lol this is true , I guess if I get it tuned I might have to go with rpm’s bigger BOV kit lol maybe could hear a slight pshhhh
@@CameronNorman26 I don't know man, I have the 50mm and don't think you're gonna hear it now.
@@paulsturgill8848 lol it is what it is I guess.
Great vid man! You do any clutching yet?
Thanks very much ! And I have not yet but it’s gonna need it soon! Especially if I end up getting a tune for it when Whalen speed releases them .
Does the hp increase at all?
I’m about to buy the 3” evalve for my 22’ to use with my stock muffler, do I need to get the heat blanket? I just don’t want to be melting anything back there
Buddy I Took it off on mine and it was fine no issues should be fine .
Hey cool vid. I just did this setup. It mentions it adds 7-8hp. Can it be felt? Or does add speed? Thanks
I feel like it’s faster but may be where it’s so loud to lol
Awesome video, man. Does this delete the cat?
Yes it does , no tune required though !
Are there any concerns about back pressure or gas air mixture being off? Any overheating issues? Do I have to tune my maverick after installing this pipe? Is there anything else I have to do to the machine if we install it? Thanks🙏
Hey buddy good question there actually it’s not necessary to tune the machine with this pipe ,I’ve been running it and no issues so far no lights or anything . No over heating. The air to fuel mixture may vary per machine though but I can say that mines been fine .
@@CameronNorman26 Ok cool thanks man 👍
Hey Cameron, how much louder is it from the cockpit? I just need to know if I'm going to need to warn my wife that our X3 got even louder from inside the cab.
Lol with it open yeah, you might wanna warn her. With it closed it’s not terrible buddy
what was the purpose of the pry bar? I will get this installed tomorrow thanks for this awesome video
You might need it to straighten out the end tip so it doesn't rub on the metal bracket and rattles until you cant handle it anymore lol i had to do it on mine.
Could you use this with the stock muffler as well? Fit on 2022 Max DS Turbo?
Hey buddy sure could , the 2.5inch as in this video and also the 3 inch ones would work with stock muffler as well !
How's it going man? Considering grabbing this exhaust noticed you didn't say anything about switching out the bracket....not sure if this is the 2.5" or the 3"? Appreciate it man great video by the way
Hey bud going great if you get a 2.5 inch you don’t have to change the exhaust bracket if you go 3 inch you do and I have a video changing that bracket out on my desert series race exhaust install . Little difficult to get to but it’s not terrible
@@CameronNorman26 copy that I'm thinking of going with the 3"....killer I'll definitely have to watch that thanks for the response appreciate it man
Thanks for the video!! Just received my RPM 3’ - hope to shoot fire like yours🔥 is your a TurboRR?
Super awesome !! Yes mine is a turbo RR. I didn’t didn’t have to do anything either for it to shoot flames it just done it I was like Man this thing is so freaking sweet !
@@CameronNorman26 man it took me hours to install this thing! But the start up had me smiling from corner to corner- and we got flames! 🔥🔥
@@nghtrdr84 heck yea ! Super awesome !
@@CameronNorman26 I appreciate the video 👊 helped me on the install (step by step) - keep up the good content!
@KnghtRdr84 did you mount your RPM 3” to a factory exhaust/after market/muffler delete? How did it match up? And did it end up spitting flames?
Did you do a tune before the exhaust or no?
Hey Zack great question ! No tune is required for this exhaust. Thanks any more questions feel free to ask !
Can you please post the link to those retractable harnesses?
Hey buddy those are the ones that just came in the machine I assume you could probably just look up can am Brp retractable harness should be able to find to Them if not let me kno I help yah
Hey Cameron, do you mind if we link this video and the blow off valve video and use a little clip in a upcoming CZcams video that I’m putting together for my Brother Kyle’s channel?
Go ahead buddy that’s fine with me see if you can tag me in it somehow I’d like to see :)
@@CameronNorman26 czcams.com/video/LcUvhI7ALfs/video.html video is up and your video is in the description!
@@Luke_Cullen thanks bro appreciate that very much !
I just installed the e valve last night and tested the car today I have a problem we’re I flip the switch to open the valve but it does not open all the way do you know what it could be?! it just opens like less then half the way
Hey buddy ,I’m sorry your having an issue with that , when mine is fully opened when you look into the pipe it splits the pipe in half at the cut out , feel free to email me cameronnorman71@gmail.com and I can send pics of how mine is . If yours is not this way it could possibly be the little motor that controls it , I actually have an extra I can send out to yah if it’s that so feel free to email me and we will get it lined out for yah friend !
@@CameronNorman26 Hey Norman I have fixed the issue it was just stuck on the pipe and needed a little grind. Everything works fine now thank you for reaching out and your help I appreciate it.
@@x3rr39 awesome man ! I’m glad you got it lined out , ever need anything I’ll try to help if I can !
Any kind of tune needed for
Flames?
Nope just install and let er rip !!! Lol
Any check engine lights? Since it might be running lean?
Hey good question buddy it does run a bit lean without the tune on it yet but no check engine lights or any issues so far
They make a 2 step tuner for these things... I think you need one
Yes !!!! That would be so epic ! I will get one hopefully here soon !
Have you had any issues so far with leaving the heat shield off? Pipe is too nice looking to cover it back up with that ugly heat shield but wanted to make sure it didn't get too hot under there to melt anything
Good question buddy so far zero issues I’ve not driven it a ton but I would say roughly 200 miles and I don’t see any signs of anything melting so I think it will be just fine . Thanks for the question!
@@CameronNorman26 ok cool deal thanks for the quick response and the awesome video! It really helped with the install
@@chrisweavil6781 awesome buddy ! Thanks
Does it spit flames with no tune ?
Yes sir !
Do you know the part number to the turbo gasket ?
I don’t I’m sorry bud
I think Rpm has them on there site
Is your car stock? And how did you get it to shoot flames???
Hey great question Chindondo! My sxs is completely stock and other than installing the evalve from rpm that’s all i done to make it spit flames, I didn’t even know it did until I was reviewing the footage from this video and I was omg 😳 it’s spitting flames !!!!! I read that it will do this where it’s pretty much straight piped from the turbo! Too spit more flames I’m hoping to get a 2 step tune that would be sweet !
@@CameronNorman26 Thank you for replying I have one more question I want to get the evalve but I want to know if you can still hear the bov nice and clear? I have the same bov as you from rpm.
@@x3rr39 if you go to around 18:55 in my video you can hear in the video the blow off valve going off and that’s with the evalve open there , now can you hear it as good as you could without the evalve I would say no , But trust me the evalve puts just a big of a smile on your face as the bov lol
btw you can take the top tunnel cover off without taking the seats out...
Hey buddy what did you do with the RPM pipes you have taken off your ride. So you can install the new RPM stuff? You can DM of Facebook if you like.
Hey bud most of them I still have , one of them I done a giveaway on I thought about doing the same with the rest to boost the channel some
@@CameronNorman26 do you still have this Electronic dump :)
@@code3newslive no this his one I done a give away on !