Vlog No.3 - Where Have I Been // I Got Wood // Giveaway Results
Vložit
- čas přidán 25. 06. 2024
- Vlog No.3! It's been a while since I posted one of these types of video's, or even posted a making video at all. It's a bit of long one, so something to help you drift off to sleep maybe?
Chapters:
0:00 - Intro
0:59 - Where have I been
3:45 - Future Videos
6:54 - New tools
8:45 - 3D Printed Clamping Square Combo
9:47 - Fanttik Giveaway Results
10:57 - Ending
Dainer Design shop: www.dainerdesign.com/shop
Disclaimer: How I use my tools, equipment and PPE is down to my choice. I use these based on my experience of using and operating these tools. Do not think because I have done something a certain way it is safe for you to do say. Always follow manufactures safety guidelines.
Thanks for watching, should you which to contact me, you can do so via the methods below.
Patreon: www.patreon.com/jamesmancave
Instagram @jamesmancave
Contact - jmc.jamesmancave@gmail.com
-------------------------------------------------------------------
Channel sponsored by
ABRACS
www.abracs.com
abracs_ltd
AbracsLtd/
Abracs_Ltd
-------------------------------------------------------------------
As an Amazon Associate, I earn from qualifying purchases made through these links.
The tools and products I use:
AEG: (known as Ridgid in North America)
AEG 18v, impact driver - amzn.to/2OWuD8S
AEG 18v, Brushless 190mm circular saw - amzn.to/2OwcWhq
AEG 18v, orbital sander - amzn.to/2zNZ2je
AEG 18v, Reciprocating saw - amzn.to/2Dubg1C
AEG 18v, Brushless 18Ga nailer - amzn.to/35Ng2U3
AEG 18v, Brushless belt sander - amzn.to/35JNj2I
AEG 18v, Brushless trim router - amzn.to/2OrouTc
Evolution power tools:
Evolution Rage5s table saw - amzn.to/2KKRU9V
Evolution R255SMS mitre saw - amzn.to/2Lyz76u
Evolution R185CCSX+ - amzn.to/2IOud1o
Evolution 2x700mm Track - amzn.to/2ITMEC6
Evolution 2x1400 Track - amzn.to/2KWGnZ0
Other power tools:
Stanley jigsaw - amzn.to/2vUlNPE
Stanley 18v random orbital sander - amzn.to/36dSdFf
Ryobi random orbital sander - amzn.to/2wy1tVA
Wagner sprayer - amzn.to/2OBIFyX
Clamps, jigs and other stuff:
Irwin clamps - amzn.to/2MHnSpu
Irwin squeeze clamps - amzn.to/2MHnSpu
Irwin sash clamps - amzn.to/2P1Io54
Irwin handy clamp - amzn.to/2wn313G
Irwin card scrapper - amzn.to/2PZFvCF
Speed square - amzn.to/2OtceP8
Gorilla wood glue - amzn.to/2P2QFpI
Epoxy resin - amzn.to/2O6bYZY
Triton pocket hole jig - amzn.to/2XVXVvJ - Jak na to + styl
OMG I was so close, I was shouting 'keep going, keep going, keep going!' 🤣♠
Haha 🤣🤣🤣 I saw your name only 2 away and thought you would notice it. Maybe next time 🤷🏻♂️
Congratulations to Chris 😊👍
Thanks for entering
Hello my friend.
nice vlog. Thank you for sharing. I'm not sleepy :-) Chris Oldman is always lucky.
Haha, some one does read the video description! 😜 Thanks for commenting 👍
@@JamesManCave it certainly is. :-) I am looking forward to your woodwork.
Yay!! Thank you!! 👍🏼👍🏼
No worries, it's nice to be able to give something back
The absolute tease of that wheel! Congrats to Chris!
Ha, a tease is certainly is 👍
James you are a workaholic but you need to be kind to yourself as well mate, I think that's what your back is telling you as well. Awesome to hear your taking part in the challenge #KPWBCC2020. Im looking forward to seeing what you come up build with all that lovely hardwood 😊
Cheers Karl, my back is made of glass at times, sometimes it's super strong, sometimes I can't even tie my laces. 🙃 I'll be cracking on with the chair build soon, once I've settled on a plan 😜
Glad to see your back James just a reminder from an old man (67) burning candle at both ends don’t work I did it for years now I’m paying for it so take care my friend and see you in the future
Thanks Phil, as my dad would say, '67 isn't old, that's not even middle age yet!'. But yea, think I need to take a break from work for a while 👍
Great to see one of the true gentlemen of CZcams back, you’ve been working awfully hard James nut I’m looking forward to seeing you in Shop action soon mate 🍻🍻👍👍👍👍
Thanks Dirk, not sure I've been called a gentleman before, but I'll take that! 😁 Always been a worker me, can't afford new toys without putting the O/T. 👍🍻🍻🍻🍻
Good to see you back, take care of yourself mate.
Thanks Stuart, I'll get there 👍
Good to see you Mate and well done to Chris 👍😊
Cheers Tony, 👍😁🙃
Never seen the plane sharpener before, looks like a really useful piece of kit. 👍
It's a really nice bit of kit, the top slides off, and can be turned around to sharpen at different angles.
Well done Chris, I'm not jealous 😞
Maybe next time Mark
Over time man! 😀
Gotta smash in the O/T whilst it's there
Lol look at you posh boy with the chapters...... works really well been messing about up and down the chapters . Congrats too chris I was only a quarter of the wheel away lol nice video mate happy birthday for when it was
Haha yep, I'm starting to get technical now. Took me a while to work out how to do them mind. The next give away I do, perhaps I can come up with a different random picking way. And thanks for the birthday wishes, card in the post I take it? 😁😜
@@JamesManCave sent already did you not get it ? Sorry mate must have got lost in post lol
Take care of your health, James. I know its easier said than done 😜
Cheers Suj, I find it hard to say no to O/T 💷💷💷 but thankfully the demand isn't there any more 😁
Yeah, I didn't think of the size of cut when getting my Titan bandsaw and it's just smaller than I wanted for the fancy coasters I'd planned to make...d'oh. I just need a new plan. Anyway, you did the right thing of looking after yourself before looking after your youtube account :)
Thanks Chris, didn't have much choice, couldn't really move lol. I had to upgrade the bandsaw as like you I didn't think about the depth of cut before I bought the parkside one, so much I want to make but not able to do it on that badsaw
Cheers for plugging ROI mate! :D I feel ya with the busy... I've been the same, shop time has suffered lately.
Thanks James, it's annoying, gagging to get out and get on with stuff but just don't have a spare minute 🤷🏻♂️
@@JamesManCave Im desperately trying to squeeze in Karl's chair build... we'll see how we go!
Lol same here mate! 🤯
Your loyal subs understand life can get in the way of making videos. Your health comes first. I feel your pain regarding the weather? Been driving me insane. Trying to build the lean to but everytime i get going it rains. As for the new bandsaw im still happy with mine. Yes its cheap but for the money you cant complain.
Anyway stay safe & keep making
Thanks David, looking forward to using it. You were the only other person I knew with the same nandsaw, until Peter Millard got one
Nice catchup James 😁. I'm sure we would all prefer you looked after your back as a priority mate. Mine is as weak as water after years of bending over under car bonnets, and even now... it just gives up and catches me by surprise 😖. Looking forward to Karl's challenge... but haven't even thought of a design yet 🤔. Take care mate 😁👍
Backs are funny old things, I got rear ended in a car accident, after I had my op most of the time my backs great, then it just goes 🤷🏻♂️. I was a mechanic for just over 3 years, would be able to do that now. And lol like yourself, my design for Karl's challenge is still a blank piece of paper 🤔
@@JamesManCave 😁 three years.. you must have still been the new lad 😂🤣😂. After about 26 years in I suddenly had the "stuff this" moment and decided to go to collage and study electronics.. so now I'm just an old fart that used to be a mechanic 😂. If your design is a blank sheet of paper.... your deffinatly copying mine. Stay safe mate 😁👍
I literally just finished my time, and then jumped ship to the print industry. Fair play for retraining in that, not an easy subject to learn. And you mate 👍💪
Near miss; Only 3 away. Well done to Chris Oldman. I'm also an old man called Chris...
Haha, I like what you did there 🙃 maybe next time 👍
Look forward to your box making videos. A mate in work wants me to make him a box to hold silver coins so need some inspiration.
Now that would be a lovely project to make. Think I'd make a box with some small drawers for the coins
Yes that sounds great, well please lead the way and I will try to copy it as my Carpentry skills are quite basic at the moment.. Thanks James for replying.
hi i mate got the ferex bandsaw last xmas as a present and i think its fantastic ,best blade i use for cuttnng wide timber is half inch bandsaw blade from axminster .or amazon 179 mm hope this helps
Hi Phillip, ooo that's great info, I have bought 2 blades of different sizes, I'll see how I get on and keep that in mind
Oh no, how did you bring yourself to part with a motorcycle! I’d find that harder than throwing away offcuts 😂😂😂😂😂😂
It's ok, I still have 3 others! 😂😂😂
Hi mate keep going , am 30 years nightshirt in lol its not easy😴😴 I love ur review on the rage 5 and am getting one, do you think you can make a router table that could fit between the slide extension table? Take care and stay safe scary times mate
Hi Derek, thanks for the the comment. I actually like night shift, it's just when you keep swapping between day and night shift it soon catches up with you lol.
As regards the rage 5, now I did give this some consideration, and basically the extension winds that attach to the main table probably wouldn't be strong enough to support a router, you could of course beef it up with supports, but I'd rather build a bench top router table then drill lots of holes in the table saw
@@JamesManCave hi James I think ur right about that. Bench top it is. All the best mate. Stay safe. Del.
Such a great video James! 💞🥰 Happy Halloween ❤️ Come by and say hello if you get a chance, we'd love to share what we've been up to 😊❤️
Thanks, and happy Halloween to you to 🎃👻
@@JamesManCave Thanks mate! Hopefully we'll see you our way soon, take care !
Hi James, do you rate the Trend sharpening jig?
Hi Jim, to be honest, I've used it only once very quickly to see how it worked. I've not used it really yet. It is a well made tool, and I like the fact it has 4 different sharpening angles. There are also many different grit stones you can buy to sharpen with, so it also has a lot of flexibility. So I unfortunately, I can't really give you an answer sorry
@@JamesManCave Thanks James, glad to see your site is taking off, I remember watching some of your previous video's and your subs were in the hundreds. Well done.
Thanks Jim! Yep, subs are slowly going up. I never intended this channel to be a job, or a change or career like many others seem to pursue with their channels, this was always a bit of fun for me. So i try and do what I can when I can on here 👍
Sorry to hear about your back! Take care of it or you'll end up a useless cripple like me.
Cheers Andy, I know you have your back issues, mine aren't as bad as that most of the time, but when does go, it bloody goes lol