Hey Steve, Good Morning, I am having trouble starting my sxs. The starter is engaging but the motor is not turning over. I took it to a shop and they figured it was one of the gears. They took off the cover but all seems ok with the gears and are unsure as to what it is. On Monday they are going to put the cover back on to see if it engages. What do you think?
Hey Steve, Not sure if you rember this post. Hey Steve, Good Morning, I am having trouble starting my sxs. The starter is engaging but the motor is not turning over. I took it to a shop and they figured it was one of the gears. They took off the cover but all seems ok with the gears and are unsure as to what it is. On Monday they are going to put the cover back on to see if it engages. What do you think? Well they changed the oneway bearing, plus the stator was gone and the waterpump had a leak and that was replaced. Finally got it back yesterday, she starts no problem. Took it for a run today. Didn't get very far before it started to hesitate. I talked with the mechanic and he mentiond that the gas in the fuel filter looked cloudy. What's the best way to drain the tank without removing it from the side by side? Thanks Fred
Looks like a good filter. The newer sxs make it much easier to change the filters. Mine would take about an hour to change. You are right about promoting different channels. People would watch what they are interested in anyway. Myself, I am subscribed to both of your channels. Enjoy them equally. Keep up the great videos. God Bless.
Great video! I just ordered one for my ZFORCE 950 HO EX from RNG after watching your video. I also ride dirt bikes and have use oiled foam filters for years. They always provide the best protection for your engine.
I got the filter from RNG and it did not go as well. When I installed it, it was difficult to push into the housing then when I went to clean it, it would not come out of the filter housing. Had to tear the whole back end off of the SXS to get the housing out then not wanting to break anything worked at it for about two trying to get the filter out of the housing. Now am trying to grind the seal down so I can use it. The moral of the story is if it won't go on don't force it. It won't come off either.
Lol oiled air filter…. Not oil filter lol You’re starting to sound like me. Those air filters are great especially the outer foam casing because that will catch most of the large debris. I’d like your attitude with boosting a fellow channel because we are after all in this together… Great video
Not that I know of. I asked RNG about that and he said there's no truth to that. I can't see why it would be an issue, if anything the filter will protect your engine way better than the paper filter, The paper filters are know to break down and fall apart. The foam filter will catch alot more dust than the OEM filter definitely.
They can't void warranty for you just simply putting a better filter on , now if say your engine blows up and they find you have a aftermarket filter and if they find traces of dirt in the intake track , then they could blame the filter and void warranty. Hope that makes sense
Hey there!! Good video! That would be an AIR FILTER not an OIL FILTER lol. Also there are two Uni filter companies. One is in Australia and one is in America. That one you have is Uni filter Australia. Uni filter USA does not make one yet. U might wanna make that a point. Thank you for the video!!
⚫ *This Kemimoto Storage Bag is a HUGE Improvement to My ZFORCE 950 HO EX!* czcams.com/video/vejNzfjnuSs/video.html
Thank you 🙏 Awesome video. We can’t wait to meet you and ride with you. Like you said plenty to go around we all work together we grow together. ❤😊
Hey Steve,
Good Morning,
I am having trouble starting my sxs. The starter is engaging but the motor is not turning over. I took it to a shop and they figured it was one of the gears. They took off the cover but all seems ok with the gears and are unsure as to what it is. On Monday they are going to put the cover back on to see if it engages.
What do you think?
Absolutely!! The 950 will breathe easier now.
Hey Steve,
Not sure if you rember this post.
Hey Steve,
Good Morning,
I am having trouble starting my sxs. The starter is engaging but the motor is not turning over. I took it to a shop and they figured it was one of the gears. They took off the cover but all seems ok with the gears and are unsure as to what it is. On Monday they are going to put the cover back on to see if it engages.
What do you think?
Well they changed the oneway bearing, plus the stator was gone and the waterpump had a leak and that was replaced. Finally got it back yesterday, she starts no problem. Took it for a run today. Didn't get very far before it started to hesitate. I talked with the mechanic and he mentiond that the gas in the fuel filter looked cloudy. What's the best way to drain the tank without removing it from the side by side?
Thanks
Fred
Looks like a good filter. The newer sxs make it much easier to change the filters. Mine would take about an hour to change.
You are right about promoting different channels. People would watch what they are interested in anyway. Myself, I am subscribed to both of your channels. Enjoy them equally. Keep up the great videos.
God Bless.
yes Fred it is much easier to get to the air filter now and it make more sense where it is now. Thanks for your support and have a great Sunday!
Great video! I just ordered one for my ZFORCE 950 HO EX from RNG after watching your video. I also ride dirt bikes and have use oiled foam filters for years. They always provide the best protection for your engine.
Good choice! Thanks for watching friend 😊
Love the video! Can’t wait to meet you when you come to our neck of the woods lol! 😊
Thanks 😀 looking forward to it!
I got the filter from RNG and it did not go as well. When I installed it, it was difficult to push into the housing then when I went to clean it, it would not come out of the filter housing. Had to tear the whole back end off of the SXS to get the housing out then not wanting to break anything worked at it for about two trying to get the filter out of the housing. Now am trying to grind the seal down so I can use it. The moral of the story is if it won't go on don't force it. It won't come off either.
Lol oiled air filter…. Not oil filter lol
You’re starting to sound like me. Those air filters are great especially the outer foam casing because that will catch most of the large debris. I’d like your attitude with boosting a fellow channel because we are after all in this together… Great video
Oops did I say oil filter lol
Hi.
Wondering what microphone you are using?
Informative video, my question is that I THOUGHT I read that using the unifilter voids the warranty. Any knowledge about this? Thanks
Not that I know of. I asked RNG about that and he said there's no truth to that. I can't see why it would be an issue, if anything the filter will protect your engine way better than the paper filter, The paper filters are know to break down and fall apart. The foam filter will catch alot more dust than the OEM filter definitely.
@@FANATICALSIDERIDER that makes total sense to me, just figured I would check and thank you. I know what I will be ordering tonight. Thanks again
@@FANATICALSIDERIDER just ordered it, thanks again
They can't void warranty for you just simply putting a better filter on , now if say your engine blows up and they find you have a aftermarket filter and if they find traces of dirt in the intake track , then they could blame the filter and void warranty. Hope that makes sense
Hey there!! Good video! That would be an AIR FILTER not an OIL FILTER lol. Also there are two Uni filter companies. One is in Australia and one is in America. That one you have is Uni filter Australia. Uni filter USA does not make one yet. U might wanna make that a point. Thank you for the video!!
Hello everyone. I'm looking for a UNI Filter for a 2022 Cfmoto Uforce 1000. Does anyone know which model number fits it?
Look in the description of this video. Go to rngperformance.net and search for the filter you need.