Just installed these taillight and front turn signal bulbs. VERY bright. As for the taillight removal, I broke the lens housing using the method described on the first lens I took off. On the second one, after pulling the lower fastener straight away from the body, I used a pry tool on the upper fastener. Clean disengagement. Be sure and pre drill the holes for the relay. The screws are crap. Thanks for the video though! Life saver.
Installed the interior LED kit in my 2017 Tundra, huge difference to the interior brightness. Highly recommend this upgrade. This video was super helpful ❤
First of all, the videos you guys put are great help installing LED for first time. and question. I have 2021 Tundra, and bought "2014-2020 TOYOTA TUNDRA LED REAR TURN SIGNAL UPGRADE." I was wondering why it didn't say 2021, but went for It anyways. Turns out, 2021 has LED rear turn signals from the factory. Is it ok to just install GTR T15 without register? or should I add the register as well?
First of all great video. I just recently installed the Morimoto headlamps and fog lamp assembles on my wifes sequoia and she loves it. But one thing I noticed is that If the lense is already red why do you have to use a red LED? The stock bulbs were clear so would using a white LED would make the stop lights brighter and still red?
That was a great complete demonstration of putting all the bulbs in I have one question does anyone sell a complete set of bulbs and how much would it cost?
where can we find the Carbide 2.0 rear brake lights that you refrenced @ 12:22 ? cannot seem to find it on your website as being listed for the 2021 Tundra...
Here you go! www.headlightrevolution.com/japanese_trucks/tundra/tundra_14_21/custitem_cat_facet_fitment/Tail--AND--Reverse,Tail-Light?order=commercecategory:asc
Quick question, in most of your prior videos, you guys said that the Carbide 2.0 bulbs don't need a resistor for turn signals. So why do the rear signals need resistors when the front does not?
Ok i have a question y u guys never do Nissan rouge sport or the regular rouge i have a 2020 I would to see what u guys have for that type of vehicle u guys can get at one to do ?????
Which resistor should I purchase for the rear signal on a 2019 Tundra? 25 W 60 HM, 50W 30 HM, 50W 60 HM? I've added a pair of Carbide 2.0 921 red bulbs for my signal/blinkers on a Tundra 2019. I am now trying to figure out the proper resistor to purchase and am having trouble figuring out which resistor is appropriate.
We haven't updated the pictures just yet on these listings, but this is what you'll get. www.headlightrevolution.com/50w-6ohm-gold-resistor-ACC.RES.50W_2
Just installed these taillight and front turn signal bulbs. VERY bright. As for the taillight removal, I broke the lens housing using the method described on the first lens I took off. On the second one, after pulling the lower fastener straight away from the body, I used a pry tool on the upper fastener. Clean disengagement. Be sure and pre drill the holes for the relay. The screws are crap. Thanks for the video though! Life saver.
Installed the interior LED kit in my 2017 Tundra, huge difference to the interior brightness. Highly recommend this upgrade. This video was super helpful ❤
Great to hear!
I would be putting a 7443 switchback bulb in that reverse housing and do some wiring so I can have an amber rear turn signal.
Which bulb am I supposed to get for a 2021 tundra turn signal bulb? I need a resistor too, what would be best?
First of all, the videos you guys put are great help installing LED for first time. and question. I have 2021 Tundra, and bought "2014-2020 TOYOTA TUNDRA LED REAR TURN SIGNAL UPGRADE." I was wondering why it didn't say 2021, but went for It anyways. Turns out, 2021 has LED rear turn signals from the factory. Is it ok to just install GTR T15 without register? or should I add the register as well?
You'll only need resistors if it's a turn signal bulb.
0:52 my 2017 Tundra uses a 4157NAK. Are they interchangeable with 7443?
4157 is cross compatible with 3156/3157
www.headlightrevolution.com/search?keywords=4157
First of all great video. I just recently installed the Morimoto headlamps and fog lamp assembles on my wifes sequoia and she loves it. But one thing I noticed is that If the lense is already red why do you have to use a red LED? The stock bulbs were clear so would using a white LED would make the stop lights brighter and still red?
It will wash out the color of the red lens and make it look pink, trust us. We've learned from experience 😂
@@HeadlightRevolution I didn't know that but that does male sense consideringthe color temp of the LEDs . Thanks for the response!
That was a great complete demonstration of putting all the bulbs in I have one question does anyone sell a complete set of bulbs and how much would it cost?
You can reach out to our support team and we can get you a full list via an email!
Sales@headlightrevolution.com
218-755-5200
@@HeadlightRevolutionare you guys able to put together a bundle deal if we buy all the bulbs in the video?
where can we find the Carbide 2.0 rear brake lights that you refrenced @ 12:22 ? cannot seem to find it on your website as being listed for the 2021 Tundra...
Here you go!
www.headlightrevolution.com/japanese_trucks/tundra/tundra_14_21/custitem_cat_facet_fitment/Tail--AND--Reverse,Tail-Light?order=commercecategory:asc
The cargo lights the two white ones, you dont state what size they are. you say the same as the ones in the inside. Which ones might those be?
They are T10 LEDs
www.headlightrevolution.com/search?keywords=t10&order=commercecategory:asc
@@HeadlightRevolution thank you! Would you recommend the GTR? No issues with Fitment, where I would need the low profiles?
Quick question, in most of your prior videos, you guys said that the Carbide 2.0 bulbs don't need a resistor for turn signals. So why do the rear signals need resistors when the front does not?
Just balancing out the load, not all vehicles are the same!
Ok i have a question y u guys never do Nissan rouge sport or the regular rouge i have a 2020 I would to see what u guys have for that type of vehicle u guys can get at one to do ?????
This could happen at some point with our transition over to more common cars and SUVs.
Which resistor should I purchase for the rear signal on a 2019 Tundra? 25 W 60 HM, 50W 30 HM, 50W 60 HM?
I've added a pair of Carbide 2.0 921 red bulbs for my signal/blinkers on a Tundra 2019. I am now trying to figure out the proper resistor to purchase and am having trouble figuring out which resistor is appropriate.
After watching again it looks like you guys are using a 50 W 6 ohm kit so I’m assuming that is the appropriate specs.
That's right!
What would you recommend for us folks in the northeast most leds seem to have issues in the cold?
Morimoto 2Stroke 3.0 bulbs!
@@HeadlightRevolution how about the like 194, 168, 3157, 3057s who would you go with?
GTR bulbs in this case!
@@HeadlightRevolution thanks for the info!
What is the socket size for the reverse lights?
Click the link in the description, it's linked there 🤙
Where can we purchase these GTR Lighting ULTRA resistors with these connections (09:26)? I'm not able to locate them on your website.
We haven't updated the pictures just yet on these listings, but this is what you'll get.
www.headlightrevolution.com/50w-6ohm-gold-resistor-ACC.RES.50W_2