Mega Moto 212 swing arm kit install and road test
Vložit
- čas přidán 15. 08. 2023
- Mega Moto 212 swing arm kit install and road test
Installed a GoPowerSports Mega Moto 212 Rear swing arm kit On the Mega Moto 212 mini bike. Tested the bike in the desert.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go-kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: czcams.com/users/Black66fea...
Instagram - Doubledown555Black66
______________________________________________________________
Parts used -
Mega Moto 212 swing arm kit - www.gopowersports.com/mega-mo...
Maga Moto 212 Minibike kit - www.gopowersports.com/mega-mo...
Aluminum gas tank - www.gopowersports.com/gas-tan...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
What an exhilarating ride, I really enjoyed this video..👍🏼
Thanks!
@@Black66can i put that swing arm to the mega moto 80 mini bike also
Best mini bike channel on CZcams!
Thanks!
Sweet Ride brother, Good thing the new coleman B200RSV came out with the rear swing arm stock as well as front and rear disc brakes with torque coverter. Just ordered mine 😊🤙
I also have a Coleman B200 with the 196 . The MM 212 comes with a 212. A lot of folks swap out the 196 for a 212. I have quite a few videos with the 196 . Also there are close to 370 mini bike videos on the channel. Check them out!
Boy oh boy they just keep putting the dude to work no rest for the wicked that's a full on motorcycle now 💯💪🏼
Sold I'm getting one
I really appreciate the support GPS has for these, and I don't even own one.
FINALLY GPS! Great install, Sir!
I enjoyed the ride in the desert 🤠
Nice review!!! I have been looking for someone to show this off before I consider buying it. Thanks!
I like those big bikes. I have to say the extra length of the swing arm kit changes the appearance of bike for the better. zit looks powerful riding off road. Excellent upgrade , I enjoyed your fabrication skills.
Hell yes, that's my kind of riding!
I had to totally cut off the chain guard and grind smooth. The rest of the process was the same.
with my back i need full suspension, thanks for the video broh
Just got mine in the mail. Gonna be a good weekend. This video was right on time. Keep up the great work
Howd it go
@@morgans8582 pretty smooth, but my welder is at my dad's up in the Northern lower Michigan. Had to rent one for the frame cut caps. Better chain as well. Doesn't kick my ass anymore.
@@anti-air-conditioning so without welding it, it didnt work ?
Glad I watched this, I might have just cut the chain guard off, thanks for the tip.
EDIT:
I had been wondering if the brake cable was long enough to tuck like that, never liked the idea of them being across the bottom..
you're awesome, thanks a bunch for the videos.
Very nice!. I like metal fabrications kit mostly bc it looks a little cleaner. Both look to be a great choice but gps kit if welding was out the question. I still haven't decide on one yet. The way u painted you swingarm made it look alot better than the rest of the installs of gps swingarms. And with no surprise with your content!
Thanks! I like metal Fabs kit but for my application the GPS kit works better with my center exhaust .
Good job on the swing arm kit, made a nice bike even better!
Love my MM212but that hard tail makes the back ache on trails...this looks like a winner...
Can you do a video on installing this rear swing arm kit on the coleman b200 model? Does it need nay different modifications to the frame than the mm212?
That little bike rips!
Im about to order this bike in the next few days here. Great to see all the mods and this mod here...being that im lil bit older now a days lmao... will be a real saver on my ole ass n spine! Love this bike and I don't even have it yet! Hey thanks for the how to!
Thanks! It's a great bike! Check out the Mega Moto 212 unboxing and assembly video and the Mega Moto playlist. czcams.com/video/B0vtN35hDDQ/video.html
@@Black66 just went to order... "out of stock☹️"
@@Black66 problem solved. Ordered MM212 bike frame, tillitson 212, stage 1 kit and a 30 series convertor for 1230. Same price nearly minus the electric start. Should be same complete setup right? Im new to this build. Will I be missing anything?
You should do a meet and greet sometime somewhere . So many things to discuss and see .😃👍🏻
cutting wheels freak me out i had one blow up on me once never used one again without the guard
Wahoo here we go
Are you gonna do a mono shock conversion on this one? The mega moto 80 mono looks awesome!
I couldn't imagine having trails and the dessert to ride in that would be amazing sadly I have no where to ride at around me makes me want to sell everything I have
That's the challenge for many of us. Finding a good place to ride.
@Black66 any chance that any manufacturer has made a bolt on swing arm kit for the Coleman ct200u ex ?? Thanks.
Easy way to get the bushings in is to use the bolt and nut to draw them in
Black66, what mods were done to the Tilly engine on that Bike? We just got one and we will be getting the rear swingarm kit but we need more speed out of the stock 212 hemi. Great videos by the way, best out there!
Sweet bike! Check out the Mega Moto 212 playlist for all the engine and part combos with this bike .
This should work on my Coleman B200R right? The frames look identical but my sprocket is on the opposite side. Looks like a great upbgrade!
A couple of the mounting points are a little different but with some fab work i think it would work. Check out the B200 videos on the channel. czcams.com/video/9Tk-t17M-ww/video.html
Havve screen shots of emails STILL but they ignore me. If anyone wants Ill send link
what happened? if you ordered one or these kits they're made to order and first batch sold fast. maybe they just need time to fab yours and ship it
How how was the rear suspension kit
I know it's a no weld install kit but how much stronger would it be if you later on weld all them mounts to the bike's frame.
That is easy enough to do !
Would that kit fit the new Colman B200R the frame looks the same as the mega motor 212 .same diameter tubing.
I would love to see you turn a Trailmaster Hurricane into an electric bike!
My brother has the mega Moto 212 he bought the suspension kit for it we have it together I start we started nosing the chain started getting loose what kind of chain tensioner will work for this
So I’m building my kit. I have the swing arm and battery box installed. Did you have any clearance issues with the chain and battery box arm ? Mine is very very close.
What has your experience been with the jackshaft? I heard they need to be replaced quite often...
Haven't had to replace one so far. Check out the 3 hour endurance race with a jack-shaft video...czcams.com/video/M0HLe8bb6kE/video.html
What header/muffler is that??? The only one ive seen from GPS that works the coleman/MM one, ive been looking for a center exit, please lmk what setup youre using!
There are a couple videos on the center exhaust in the Mega moto 212 playlist czcams.com/video/_UF3rb_4OBA/video.html
That bike with kit (smaller muffler…. How much did it cost total? What is MPG? TOP SPEED? I WANNA SAVE UP AND MEKE IT! PLEASE ANSWER. THX ALTON
what engine would you put into the mega moto to achieve 70 + mph. And gear ratio , how many in the front and how many teeth in the rear? also is there an aluminum flywheel or high rpm flywheel that has the ability to charge batteries, and if not how would you light up your bike?
I would use a 236 or a 263 to achieve 70 MPH . I would use the lighting kit in the street legal videos czcams.com/video/75arrzEwOvc/video.html without using charging coils. The kit uses lithium ion batteries to power LED lighting which last a long time before a recharge is needed. The gearing would depend on rider weight.
@@Black66 i am wondering if the 500cc duromax engine will fit. it also has sufficient charging coils 10 amps, or so i hear. also studz mini bikes in michigan sells a street legal kit . and am asking if you would make a video on this matter. thanks alot a fan.
Where did you get that mirror from that’s on the bike
Amazon
👍👍👍
Hello. Again thank you for all you do for the sport!!
Mega Moto VS The Trailmaster Hurricane 200X.
We just built a Mega M
oto/Tillotson kit for my son. I was impressed with the robust frame and build quality. He would like to add the rear suspension kit in the near future.
I now want one and need rear suspension (63 yrs young). I'm debating over the Mega Moto: prefer the Tillotson, beefy built frame, and even though it's more work, the rear suspension kit also appears to be better built VS the Trailmaster Hurricane 200X.
The Trailmaster would be much easier out of the box, but I don't care for the engine (when compared to the Tillotson), and have concerns for the overall build integrity again VS the Mega Moto.
Your expert opinion/guidance would be much appreciated.
Thank you in advance!
Mike
I think, after watching this and knowing how much these cost, I'd just get a different bike that has what i want already or build one. Seems kinda crazy to me anyway. I'd miss my old bike. i like so many different minis to tear one up to make it do something that another one has already saddens me. But also - like everyone says, I have way too may single cylinder bikes here :0) I would think for that kinda dough for that kit they would have included some kind of relocation thing for the exhaust, looks like if you were just a bit heavier you would have torn yours right off or maybe ripped your rear wheel up. I mean, that kit costs nearly half the cost of the roller kit. YIKES!
Normally these bikes don't come with a center exhaust. The swing arm kit would work perfectly on a stock bike. Check out the fleet video for many more bikes and also the playlist for many more bikes and part combos czcams.com/video/mpP_B4hxR7E/video.html
That turned out nice, looking forward to getting my new Tillotson 212 for my mega moto 212 pro. The Honda set up just doesn't cut it. Are you running the original rear sprocket? It's time to go over 30 MPH on mine.
The Tillotson 212 will work great on this bike. Yes, I went from a 40 rear sprocket to the stock sprocket.
@@Black66 thanks for what you do, not everyone gets to enjoy what they do you’re a rare and dying breed my brother. I can’t get enough of the channel, every other day I’m looking for new videos even though I get notifications but I still look.😆
I think its time to build a big block mini bike!
Does GPS sell the bushings for when those go bad?
Will it work on a Coleman bike?👀
I'm sure with some fab work it would fit. Haven't tried it on a Coleman bike yet...
Looks great ! I need it now and what exhaust is that ?
It is custom-made out of a GPS pipe. Here is the video
. Also, check out the Mega Moto playlist for many parts combos with this bike. czcams.com/video/_UF3rb_4OBA/video.html
What exhaust tip are u running on urs??
Its a pit bike muffler
i guess they shipped your products nicely since they knew it would be on camera?
GPS please send me what i ordered. I love how you blocked me from reviewing after you sent the wrong parts and never made it right. Buyer beware.
Will this kit work with the 40 tooth sprocket noted in your other video?
Could this work on a Doodlebug ?
no....db30 is way too small
@@TheShangralaaaa17 Did not know
@@Popcorx do you own a doodlebug?
@@TheShangralaaaa17 yes I do
I want to do this I’m just to scared I’ll break my bike