Sharkoon VG6-W Mini Tower PC Computer Case Unboxing & Build.
Vložit
- čas přidán 12. 09. 2024
- Buy- amzn.to/3PHxBP1
In this video i'm unboxing the sharkoon vg6 computer Cabinet case.
This is case comes with 4 Front panel usb ports.
sharkoon vg6 pc cabinet comes with 3 120mm pre-installed fans.
Sharkoon vg6 cabinet comes with a acrylic side panel.
#sharkoon #vg6 #gurribuy
its been a while since i saw your videos man almost a year.
im glad you have a case now.
the first video i saw was when yout making your own pc and it was great
Thanks man.
u made the vedio of the system 1 year ago and u got the case now ... great patience
you make do with what you've got.
Also lack of financial resources also help.🥲
Following your video I have assembled the same processor on the same motherboard and installed Ubuntu 24.04 on a 500GB nvme ssd. The installation( from a USB stick) took around 7 or 8 minutes. I have disabled Asus Performance Enhancement. My cabinet does not allow for any sort of significant cable management and I can only drool at the cable management setups I have seen on CZcams. Otherwise, it all seems good for now.
Why drool over cable management.
It does not add to the performance.
RGB, cable management are useless to me.
people who make videos about cable management don't always use the same computer, All they care about is aesthetic.
And because most people only have one computer and if you need to change something in there, you will be messing up the cables anyway.
This is the reason i don't waste much time doing cable management. So that next time if i wanted to install something or change some hardware, I would not need to worry about messing the cable management because there was none to start with.
Very nice 😊
Thank you.
I wish you had shown the connection of the power led, hdd led, and reset button cables from the front panel. Do we have to worry about the polarity when connecting the power led and hdd leds? Does the hdd led light up for ssd and nvme drives also? Also it would have been nice of you had shown the cable management also.
for led's polarity matters. but it should be easy as everything nowdays is labeled. so, you should be able to see '+' and "-" on the board as well as on the front panel connector.
for reset switch polarity does not matter, you can connect in any orientation.
As far as hdd light is concerned it should still work despite using an ssd or nvme.
But, i'm not sure because i never use the hdd light. it serves me no purpose and also distracts me during the night.
If you go into the bios you should be able to turn off the blue rgb
The one that i have are not addressable LED.
None of the fans are connected to the motherboard so, I can't turn them off.
Sorry to bother you again. I have an Ant Esports Si11 cabinet, their cheapest. There is one chassis fan powered by a so-called molex connector that you have talked about. My SMPS, Cooler master 450W has 3 molex sockets chained to one another. Can I connect the fan connector to any of the 3 or the first one on the chain? Thanks. I am using your video to do my first assembly.
you can connect the fan to any connector on the line. It does not matter which connector you use the 1st one or the last one on the chain.
Bro I am planning to build pc with specs i5 11th gen and 8gb ddr4 ram and same motherboard as you have and I also have my old gpu gtx 950 but I am not planning to buy new psu so my old psu i ball marathon 500watt will work or not please tell me
Why save money on the PSU.
I think it is a very old model. It may be working fine but if it is old the capacitors must be old as well.
Why take changes with your new build using an old psu.
I suggest you buy a new psu at least 700w.
once you have your system up and running then you can try your old psu if you like.
@@gurribuy thank you bro and one more question in future I am going to buy rtx 3050 so 700w will be sufficient or not?
@@PranayBhagat04 yes. it should be enough for 3050.
@@gurribuy ♥️♥️
@@gurribuy I am facing with same problem going to build similar pc like he is going to and I also have similar psu like him and I am very budget tight so for one or two months i use my old psu it will work fine or not please reply