This is the drive train. 1/4 hp, 1725 rpm. 1.5" to 6" pulley reduction. The 3rd shaft is only 27 rpm. This shaft will hold the crank arms. Keep watching.
The best rotation conversion video I’ve watched yet. Love the tri conversion. We did this growing up with all kinds of things in the farm. Don’t let the naysayers who don’t understand the basics of rotation stop you from providing videos.
MrE2112 I completely agree. I have watched so many ridiculous videos that I had to give you credit for creating a conversion that made sense without confusing the masses. We used huge tractor rims to increase power.
There are many of us that understand fear ratio yet refuse to complicate the basics with people. I’m making a steam punk style can crusher with all scrap and it will have air involved just to embellish the effect once the sensor eyes catch the can. I had a vid for the motor works but watched yours and thought,.... ya know what,.... this guy has the vid. 40:1. For my downplay of the motor might work but I FOIND that a slip chain worked better. Made my final production much more dramatic and increased my pressure. Full cans of veggies. Makes a mess but at least I know the power is there.
MrE2112 Again thank you. From al of us that don’t make videos and still putter around online. Thank you. Your convert has been the simplest and yet the most effective.
This might be the type of setup I need to use on a homemade vehicle tire mounting machine except the last driven pulley would probably need to turn maybe 3/4 as fast or maybe even half. Do you think the last pulley has enough torque to mount a tire on a rim? I'd need the last pulley to turn 1 revolution in something like 10 seconds or maybe a little less.
jiaw bermz for example, if the small pulley is half the size of the large pulley, it will rotate twice as fast as the large pulley. The large pulley is then connect to another small pulley by using a shaft, these two pulleys spin at the same RPM. That small pulley is then rotating at twice the rpm as the next big pulley but half the rpm as the first small pulley. So on and so forth. This is how you transform RPM into torque.
Good work bro, gear motor cost more using these pulley system is economical and doea the same work. I needed it for my project of extrusion machine. Will work on this system only.
@@musicmaneman38 Yes i did consider that but a bit pricey and the cost for delivery was a little to much, I had built my system and it works great as I already had all the stuff in my garage to build a pully system, But my second pully was place high near the motor to reduce the overall length, And I only needed two pulleys after the motor for the speed I needed,
Thats the best example to describe gear reduction without rocket-science. Thank you
The best rotation conversion video I’ve watched yet. Love the tri conversion. We did this growing up with all kinds of things in the farm. Don’t let the naysayers who don’t understand the basics of rotation stop you from providing videos.
A gearbox would be better. Maybe a 40:1.
MrE2112 I completely agree. I have watched so many ridiculous videos that I had to give you credit for creating a conversion that made sense without confusing the masses. We used huge tractor rims to increase power.
There are many of us that understand fear ratio yet refuse to complicate the basics with people. I’m making a steam punk style can crusher with all scrap and it will have air involved just to embellish the effect once the sensor eyes catch the can. I had a vid for the motor works but watched yours and thought,.... ya know what,.... this guy has the vid. 40:1. For my downplay of the motor might work but I FOIND that a slip chain worked better. Made my final production much more dramatic and increased my pressure. Full cans of veggies. Makes a mess but at least I know the power is there.
MrE2112 Again thank you. From al of us that don’t make videos and still putter around online. Thank you. Your convert has been the simplest and yet the most effective.
Just getting vack to you on this but.. the motor was only 1/8hp at 1725rpm.
The torque was the payoff.
this is what i'm looking for before making one. i'm thinking first of a bicycle front and rear sprockets. thankyou for sharing.
Thanks for this videos
Sukses selalu bang, ini video yg sy butuhkan
Alhamdulillah ini yg sy butuhkan.
Thanks for share
thanks bro 😊😊😊
Put on water base opp diraction low rpm to high voltag and rpm
Thanks so much. Did in saw this vedio very very usefull ❤❤❤😊😊iam from india madurai 🙏👍
good
What is the shaft size?????
This might be the type of setup I need to use on a homemade vehicle tire mounting machine except the last driven pulley would probably need to turn maybe 3/4 as fast or maybe even half. Do you think the last pulley has enough torque to mount a tire on a rim? I'd need the last pulley to turn 1 revolution in something like 10 seconds or maybe a little less.
No way. A gearbox would be better.
@@musicmaneman38 Thank you 👍
what is the size of v pulley
الله يعطيك العافية
English please. Thanks.
1440 Rpm moter hai to hume kitne inch ka pulley use karna hoga moter. Aur shaft me bada aur chota pulley size . please batliyea
I have a five-horsepower motor with 1,400 rpm, but I need 60 rpm. Will implementing this idea achieve the goal? Thank you very much.
The reduction was 1.5-6 through the stages. So it woud be slower. Use good bearing blocks instead of the home made ones that I made.
@@musicmaneman38 Thank you
Terimakasih informasinya sangat bermanfaat sekali salam kenal sukses selalu
Thanks bro ..I understood what is used of wheel ..to reduce the speed of motor..
Mesin cuci kah itu bg?
what are the mount block called holding the spindles? I am no expert on this and don't know the technical jargon to source parts, cheers
I made them from aluminum blocks with bronze bushings. Use bearing blocks instead.
@@musicmaneman38 thanks for answering
Assalamu'alaikum, bisa gak abang buat satu experimen, pompa air dari kincir angin dan pengatur kecepatan pakai puley ke tabung sedot air.
Memang mungkin kecepatan dari angin bisa tidak stabil.
😍😍
How do you reduce the speed of the 2nd and 3rd pulleys??
jiaw bermz for example, if the small pulley is half the size of the large pulley, it will rotate twice as fast as the large pulley. The large pulley is then connect to another small pulley by using a shaft, these two pulleys spin at the same RPM. That small pulley is then rotating at twice the rpm as the next big pulley but half the rpm as the first small pulley. So on and so forth. This is how you transform RPM into torque.
1.5"-6"
in the 2nd pulley what is the size..for the use of ice crime machine
1.5" & 6".
Is that good for ballmill turn?
I would use a gearbox instead. Maybe a 90:1.
what's output RPM..sir..
dinamo penggerak berapa rpm itu pak,makasih
Input 1725rpm, output 27rpm
Belt no kya hain
what is the shaft size?
1/2"
What is the rpm of this output shaft
27 rpm. 1725 Rpm x reduction .25 = rpm, x .25 = rpm x .25 again. Repeatedly.
@@musicmaneman38 can you talk to me in private ! I want some suggestions from you actually I am making a project so need some statistics !!
what size pulleys?
1.5" - 6".
Low rotation = High power
*Torque
My motor is running but pully is not moving .. PLZ tell me why?
Belt too loose.
@@musicmaneman38 no.. Without belt itx not moving
@@wazaifeshazli1041 pulley slipping. Tighten screw.
@@musicmaneman38 k thnkx
What RPM u get in last pulley
Tanveer Hussain 27rpm
Good work bro, gear motor cost more using these pulley system is economical and doea the same work. I needed it for my project of extrusion machine. Will work on this system only.
I am not sure what you are making but i can tell you that the bronze bushings for the bearings are not efficient.
Thanks for the suggestion, and the pulleys are not properly aligned
Tanveer Hussain the first one was bent a bit. Cheap aluminum.
How rpm this motor
Kamel Saw 1725 i think. Pulleys were 1.5" and 5".
@@musicmaneman38 what is shaft diameter?
Where’s the crushing pt???🤔🤔🤔
Dead project. The idea was to hook up a sliding piston with arms on the last shaft. I had no way of adjusting the tension on the pulleys.
Part 3
czcams.com/video/FC6TrGxzGMI/video.html
Ime doing this type of system to slow down a wet stone, so my water don`t splash every where, Don't have speed control on my motor
A gearbox would be better.
@@musicmaneman38 Yes i did consider that but a bit pricey and the cost for delivery was a little to much,
I had built my system and it works great as I already had all the stuff in my garage to build a pully system,
But my second pully was place high near the motor to reduce the overall length, And I only needed two
pulleys after the motor for the speed I needed,
Moter speed=1725rpm × pulllly size 3''inch, = 5175rpm.....
5175÷10'' inch pully =517.5rpm..
517.5rpm×3'' inch pully 1552rpm...
1552rpm÷10'' pully 155 rpm...
155rpm ×3'' inch pully 465rpm..
465rpm ÷10''inch pully. 46.5rpm...
👌👌👌👌👌
زياذة العزم وتقليل السرعه
Please solve me 200 to 2 rpm
geargenerator.com/#150,150,50,200,0,3,0,6,1,10,2.5,4,27,-90,0,0,0,0,0,0,96,24,4,27,-90,0,0,0,0,1,1,10,2.5,4,27,-90,0,0,0,0,2,0,87,21.75,4,27,-90,0,0,0,0,3,1,10,2.5,4,27,-90,0,0,0,0,4,0,12,3,4,27,-90,0,0,0,0,0,0,3,-673
@@musicmaneman38 pulley drive
@@musicmaneman38 input 200 rpm out put 2 rpm how many pulley used? And size of pulley?
@@TECHNICALSTUDYZONE use the ratios listed to figure each pulley size.
Big torsi
Where the fuck are the cans. ??
FFS BOOOOOORRRRIIINNNGGGG
So.
I just lost 2 minutes of my life
Sad Sod sorry for that. Dead project. I am doing cnc machining now after my father's passing. It is a very old video.
MrE2112 so sorry for your loss, hope your not offended by my silly comment. Xx
Sad Sod It's all good.