I see a bunch of comments about turning the engine and other options to get it to run the right way, but a simpler solution is what we do with machine belts. Just make the chain into a figure 8. turns the other way and super easy. You might need a guard, but it works.
yes, like Harry Burford just said, turn the rear wheel around so the sprocket is on the other side, and turn the engine around too so the sprocket is on the "right" side of the board.
Всё классно👍! И новые инструменты супер. Следующий проект сделай переднеприводный двух колёсный самокат. И протестируйте его в лесу по бездорожью. 🤏✌👍. На таких колёсах должно быть супер!
Hey dr ds, since we are your loyal fans from all over the world....how about you pay homage by signing our country's names on your builds....your loya fan from Kenya 🇰🇪
If you look up a pivot cup on skateboard trucks it will help you tremendously Where you attach the front axle like a skateboard truck On an actual board there is a little cup there so your board does not sway back and forth so hard Doing this with let you achieve full speed more safely and harder for you to turn by shifting your weight forward and back
That clutch is meant to put the engine facing the other way, since the engine turns counter clockwise the gear box makes it go the other way, so the engine goes mounted with the carb facing forward
Congratulations, young man. You are a very intelligent person. Between the ideas, workmanship, mistakes, and last but not least by your sense of humour shown in picking up subtle and tacit moves with the photography and the instant timing at which you depict it in order to accent your determination, as for example at 20:12. Well done and all the best.
Nice job . Made with the plans in your head. Imagination. Could you do a build for a motorised wheelbarrow . If you do one that can be sold in a kit then you will probably make a few million bucks. Cheers .😎
Ya need to turn your motor around so you steer with 2 wheels. More stable and no exhaust in yo face. Like your stuff brother and I love that you don't talk. Keep up the good work 💯
rear wheel steering is where board wobble comes from. get that motor spun round and ride it like you intended. also go with a decent plywood and you can cut that deck thicknes down by 75%. weight is not your friend
I think it's better with the single wheel in the front. But all you would have to do is turn the engine and drive sprocket 180degrees to the other side of the skate
this looks like a lot of fun! i built something similar. you will want the engine mounted to a 'plate' separate from the frame. Then slotted holes in the plate front to rear. Then you can fine-tune the chain adjustment. & perhaps turn the engine & wheel around to the other side so it goes forward & it will be more stable. good luck! liked & already subscribed
I'm not sure the gearing is right... most of the time, you can hear the engine is 4-stroking and running at a pretty low RPM, meaning the clutch is probably slipping. and hasn't fully engaged. I think you could get better performance by choosing a smaller sprocket on the engine side! Great project nonetheless! :)
Use an Extra Gear? Wind the pull cord in the opposite direction, or use a drill to start it? I heard this works on two-stroke motors, but I haven't tested it. I think it is probably easier to steer "backwards": I can ride a tricycle, but I cannot ride a skateboard.
I owned one just like this 49cc 2stroke it was fun going uphill in the mean streets of Wellington.. All the power was one ine wheel and made for mad speed wobbles when i let off the gas... Ended up going into the back of a parked van and broke my shoulder. While i wasnt using in crackheads stole it....
По утрам одев часы 😂😂😂, не забудьте про.....Трусы!!!😅😅😅😅😅 !!! незабудьте,незабудьте,незабудьте,незабудьте,незабудьте, про трусы.....😅😅😅 czcams.com/video/tQEThzMUAXI/video.html
I see a bunch of comments about turning the engine and other options to get it to run the right way, but a simpler solution is what we do with machine belts. Just make the chain into a figure 8. turns the other way and super easy. You might need a guard, but it works.
I love how you have beautiful edits of you cutting and tooling, and I love that you left in your mistake, instead of editing it out. Respect.
yes, like Harry Burford just said, turn the rear wheel around so the sprocket is on the other side, and turn the engine around too so the sprocket is on the "right" side of the board.
Came to say the same thing
Hi brother
If you turned the engine 180 degrees with the sprocket to the right, the problem would be solved.
svaka čast majstore, jednostavno smišljeno, posebno skretanje, a funkcionira
Bolje, jos malo i na starim stazama slave si, imas like
It look more fancy with one wheel in front💯
Всё классно👍! И новые инструменты супер. Следующий проект сделай переднеприводный двух колёсный самокат. И протестируйте его в лесу по бездорожью. 🤏✌👍. На таких колёсах должно быть супер!
Hey dr ds, since we are your loyal fans from all over the world....how about you pay homage by signing our country's names on your builds....your loya fan from Kenya 🇰🇪
Am also a fan from KENYA 🇰🇪🇰🇪
Hahaha dobro prevozno vozilo samo nemoj jako stiskati kočnicu da nebu bilo red bull daje ti krila
AUSOME!!!!!! Good job!💪💪💪
I like the way you made the front axle and wheels ect.and bushing..
If you look up a pivot cup on skateboard trucks it will help you tremendously
Where you attach the front axle like a skateboard truck
On an actual board there is a little cup there so your board does not sway back and forth so hard
Doing this with let you achieve full speed more safely and harder for you to turn by shifting your weight forward and back
an excellent job, well done, yes, I would add something very small, 2 lills to the legs or two irons so that it does not fall for balance
٠😃😃
Radical rig. My favorite part is the doctor coat.
That clutch is meant to put the engine facing the other way, since the engine turns counter clockwise the gear box makes it go the other way, so the engine goes mounted with the carb facing forward
Congratulations, young man. You are a very intelligent person. Between the ideas, workmanship, mistakes, and last but not least by your sense of humour shown in picking up subtle and tacit moves with the photography and the instant timing at which you depict it in order to accent your determination, as for example at 20:12.
Well done and all the best.
Odličan waw tako da se spasite iscrpljujuće šetnje od svog doma do svoje radionice ili gdje god želite ići, dobra alternativa
Dr. Mad Max mini! Nicht schlecht!
Nice job . Made with the plans in your head. Imagination.
Could you do a build for a motorised wheelbarrow . If you do one that can be sold in a kit then you will probably make a few million bucks.
Cheers .😎
Ya need to turn your motor around so you steer with 2 wheels. More stable and no exhaust in yo face. Like your stuff brother and I love that you don't talk. Keep up the good work 💯
Odlično, svaka ti čast!! 👏👏👏👏
Hey, try to switch the engine pozition, and the brake disc tot make it run in the opoziție direction
Odličan projekt svaka čast samo naprijed
Great job.. the only thing that you have to do is turn the engine around and wheel and sprocket and it will be in the rear... 😁
Kad vidiš kako drugi rade slične projekte tačno se vidi da je ovaj s Balkana.
Svaka čast majstore!
Sve pohvale...
Bravo!
Big fan from Poland 😁
rear wheel steering is where board wobble comes from. get that motor spun round and ride it like you intended. also go with a decent plywood and you can cut that deck thicknes down by 75%. weight is not your friend
Nice little Fardier de Cugnot
flip the motor, sprocket on the other side, reverse direction
Dobro je ispalo 🍻
I think it's better with the single wheel in the front. But all you would have to do is turn the engine and drive sprocket 180degrees to the other side of the skate
Svaka čast odličan video samo ti predlažem da složiš neko sjedalo da ti bude lakše vozit
to onda nebi bio skejtbord već neš drugo
to onda nebi bio skejtbord već neš drugo
brate, svaka ti čast!
Wow, it turn so nicely. Its a shame we didn't see it in the video.
Da je malo Jace pa aj🛠️⚒️💪👌👍
Sve pohvale🏅👍👏👏👏👏👏
Great job dear friend wish you all the best❤
Buenas noches Bro solo jira el motor y cambia el disco de freno acia donde esta la estrella de transmisión para que ande como tu querías de principio
Why didnt you just turn the engine and rear wheel 180 degrees?
Turm motor and sprocket on the opposite side and it will work just fine
this looks like a lot of fun! i built something similar. you will want the engine mounted to a 'plate' separate from the frame. Then slotted holes in the plate front to rear. Then you can fine-tune the chain adjustment. & perhaps turn the engine & wheel around to the other side so it goes forward & it will be more stable. good luck! liked & already subscribed
Great odlican projekat
as always, brilliant
Gordon from Ireland
I'm not sure the gearing is right... most of the time, you can hear the engine is 4-stroking and running at a pretty low RPM, meaning the clutch is probably slipping. and hasn't fully engaged. I think you could get better performance by choosing a smaller sprocket on the engine side! Great project nonetheless! :)
Have you considered putting a handle on it. It would connect your upper body, like on a Segway.
Just a thought, fun content!
amigo.beauiful shots- catch you later.
You dont make small gearbox for front drive?
very nice , you know you should think about putting epoxey resien on it with some cool design
It's very nice that you have been working
Salut 👍✌🏻😎✌🏻🇫🇷🇧🇷 Cool 👍
Da li pratis caletovuradionicu
It's still a lot cooler than an electric scooter 👍
should clean your metal a little more on the edges. mig really likes clean metal.
Svaka čast.
Use an Extra Gear? Wind the pull cord in the opposite direction, or use a drill to start it? I heard this works on two-stroke motors, but I haven't tested it. I think it is probably easier to steer "backwards": I can ride a tricycle, but I cannot ride a skateboard.
it does because the motor / engine can run either way
you have to try to start the engine from the opposite direction so that he can go forward
SVAKA CAST EXELEND WTF SUPERRRRRR
WOW!
2M subs coming soon
😍
why cant you just turn the engine 180degrees, and also the wheel.. ?..
Okreni motor i vucni tocak za 180° i ici ce u drugom smeru. Samo moras prepraviti nosace motora i kocionih klesta
ok so love the concept except the backwards part...also alil wobbly so could you make me one the right way and what would you charge??
Congratulations for the 2 million followers you deserve more if God wills for the 10 million
Мастеря скейт ,не забудьте построить туалет и будку для енота...😮😢😮
To jest bardzo dobra robota
I would ride it, couldn't you just flip the motor around same as the rear and bolt it back up?
Cool build man
Ajme ,Kralj 😂❤️🔥👍👏
Happy 2m
I would put a handle on it for better stability and a place to mount the gas and break leavers
esto me sorprende, 😱 me imagino una silla de ruedas con motor a gasolina
there is a huge diy electric skateboard community. i built a 35mph board with 25 miles of range. you should try it.
👏👏👏👨🏭
Lux robota
Hola bacán me encantó tu mono ciclo sólo para que te camine al derecho sólo borra el motor hacia el otro lado
2:05 I would put in fresh fuel because it gets unmixed and can cause a piston seizure
Buen video.
No basta con saber.
También hay que tener las herramientas y la platica.
Super ideja i posao🙂
Grande Doc!!!
I owned one just like this 49cc 2stroke it was fun going uphill in the mean streets of Wellington.. All the power was one ine wheel and made for mad speed wobbles when i let off the gas... Ended up going into the back of a parked van and broke my shoulder. While i wasnt using in crackheads stole it....
great job! and thanks for not playing jungle music
Go pro kosy 😁
Pre dobro. Imam pitanje. Gdje kupuješ te ležajeve sa kučištem?
Trgovine traktorskim djelovima 🤗
U redu, hvala
Svaka cast
nice you think i can do it with chainsaw engine ? has 18.000 rpm i think dont know how mutch cc
So perfekt
You need some no skid tape on the top of the board
Yio dude just turn the motor around and flip the wheel to the other side voila
That turn radius must be a mile
Nice project!
1:58 hahahahahaha kralj
😁😁😁
Flip the motor and put the chain to the right
Cestitam na dva miliona pratilaca
why not flip or rotate the motor to other side that simple.
Awesome !!
I wasn’t expecting the engine to be mounted at the front. How do you go lifting the front wheel over rises/gutters?
You think he's gonna ride it after the video? Would you?
@@no-prophet 😁...I’d ride it
but I wouldn’t make it.
Kako je krenulo sa reciklažom pomislio sam da ćeš ugraditi dasku za peglanje........
Pa kako se toga nisam sjetio 😂😂😂
По утрам одев часы 😂😂😂, не забудьте про.....Трусы!!!😅😅😅😅😅 !!! незабудьте,незабудьте,незабудьте,незабудьте,незабудьте, про трусы.....😅😅😅 czcams.com/video/tQEThzMUAXI/video.html