M5Stack M5StampS3 Card Computer Introduction

This is the fist video looking into the M5Stack M5Stamp Card Computer and is meant to be a brief introduction into the function available on the default firmware.
If you have some spare change you can now buy me a tea @ bmc.link/ajb2k35
I don't have tiers or levels as I give every document I write away for free.
If you are enjoying these guides please can you consider subscribing and liking and if you would like to follow me on social media then you can find me on twitter using : @Cpt_J_Purcell
Discord using : Adam#9228
Mastodon using : @[e-mail]
If you think these guides are crap then please let me know as well!

[@Clockwork_Planet]

"Never ever open the front..." I wish I had seen this before I learned the hard way. Great video, thanks.

[@AJB2K3]

Yeh That why I added it .

[@uSlackr]

I've opened the front several times. If you, like me have to look... Go slowly especially in the corner near the Stamp. you are prying the pins from the connector underneath. There is a thin ribbon connector on the stamp so don't pull on it once it releases. When reassembling, pay attention to the on/off button - it bends. Ensure it protrudes through the hole for it in the case.

[@AppliedCryogenics]

The grove connector is more than just supply voltages. It an I2C serial bus interface for connecting various peripherals.

[@TheEmbeddedHobbyist]

Second as usual 😢, merry Christmas Adam and Fred

[@johnny14794]

You press the "Go" button top side to go back to home menu icons and quit the running app/code/program.

[@Ohnoitsbuggerednow]

That's cute

[@TheEmbeddedHobbyist]

Bit small for my old,d eyes 😂

[@gillandro2]

I have one myself, now i cant get it to turn on any more... was trying to put firmware on it now i get a can not connect error message when using m5burner... how do i fix it? Ty

[@AJB2K3]

What do you mean "Not turn on?

[@gillandro2]

@@AJB2K3 it just shows a black screen and when i try to burn firmware on it it gives me a can not connect error at the bottom of the m5 burner app

[@AJB2K3]

How to Burn firmware like UIFlow2 to the #M5Stack Card Computer. czcams.com/video/bnw0tPslV2o/video.html

[@gillandro2]

@@AJB2K3 my hero

[@gillandro2]

@@AJB2K3 can i only put one program at a time?

[@DoctorTooploop]

how do you charge this thing?

[@AJB2K3]

You plug one end of a a USB cable into the USB port of it, plug the other end of the cable into a active USB power source and wait.

[@fredflintstone1]

Thank goodness not an advent Calendar video Merry Christmas Adam, and everyone P.S. I was first again

[@wskinnyodden]

FN+ESC Duuuh!

[@AJB2K3]

Doesn't work on mine