Around 17:00 in when you discuss cut by layer order, what did you have to press on the keyboard to select individual lines/shapes out of the entire pattern to move them to separate layers? Is this a vector file or something? Can you do something similar with imported SVGs?
At the very end of this video, you clicked on the outside edge of the circle, then clicked something to make that on a new layer, what id you hit hot key wise or click to put that circle shape on a new or separate layer? Other wise, I am with you sir. Thank you for helping us who are totally new to laser software. I hope you have a blessed week and are staying healthy and safe. Dale
Do you have a tutorial or documentation on printing on tile where you use a negative image to printed on painted tile? I know it can be done with GIMP via da big gimpin plug-in, but I dont want to buy two software programs DBG plug-in is $40.
Thank you this looks a little easy almost like the silhouette studio :-) just got a laser and was worried about how to work the program but this makes it look like its going to be easy
Hello. What is your suggestion if a person wants to add "nodes" to an image?please refer to 9.10 - node editing. I see that you can manipulate nodes, but what if I wanted to create additional nodes or remove existing nodes? Thank you.
Thanks for the video and tutorial. It definitely helps for us newbies. Did I miss it or does lightburn have a fu cation for testing the focus of the laser to ensure it is at the proper height above he material? Thanks again.
3 years later, but for anyone else. Yes, it does. I believe on the docked cut panel, it says "z-focus/auto focus". But it only works with a motorized bed of course.
is there a setting in lightburn (off line mode or something) that will allow the software to be used (for design purposes) without being connected to the laser machine..? my machine is in my shop 2ac away from my house...i would like to edit and design projects wile in the house and not connected to the laser thats 2ac away in my shop.
just bought lightburn while i wait for my laser and I see these tutorials are 5 years old so wondering if the program changed and if so are their updated tutorials. I saw in your cuts/layer window the layer says cut but on my version i see line, fill and offset fill and no cut.
Thank you for an outstanding tutorial. It seems that the software is a lot like Corel Draw, that I have used for some 35 years. I am going to have fun. Thanks again.
Hi and thanks for this useful video. Is it possible to set the "Home" point programmatically within lightburn (for each cutting job) or is it not possible and must necessarily be set via the laser engraver firmware commands before running the gcode produced with lightburn?
If you have a GCode machine, you’re looking for “Set Finish Position” in the “Move” window. Jog the laser where you want it to go after a job, and click that button.
Am I missing something? If I bring in a DXF its a single shape with no editable nodes. Like your logo's dragon eye can't be selected and repositioned. Thanks for fixing the USB connect.
Looking forward to the release. Great work. Has pricing been announced yet? Also, is that Star Wars graphic in the video from the public domain or is it your own?
Is there a place where a person can get the LightBurn Dragon AI file? :-) I would like to get that burned and have on display in my shop area so it can get picked up in the video footage for my CZcams channel.
I was wishing there was a time index to the video. This video is linked in the LightBurn Edit Nodes documentation. Unfortunately, when I did find the relevant section, I could really use a lot more coverage of the subject. I don't understand what some of the operations do and I would like to be able to adjust a node by typing numbers (i.e. XY coordinates) so that I could make small and precise adjustments that I can't do reliably with a mouse. Great program. Thanks.
Thank you for the feedback. We are going through and redoing some of the early videos to update them while making them more concise. Nodes will be one that we cover.
In a previous tutorial you mentioned that the “ enable laser firing button” should not be selected if Im using a CO2 laser. My plan is to purchase a THUNDER laser, and im still fairly new to lasering, could you explain why you stated that doing so would be “ very dangerous”? Thanks.
Because the beam from a Thunder Laser (or other CO2 machine) is invisible, and will blind you. The machine comes with a low power red-dot laser that provides the same functionality but is harmless and safe.
my laser doesn't burn anything.it is moving and pretending to do the job but what shall i do that he is burning the image i want?but laser grbl works fine
It sounds like the origin may be set incorrectly. If the origin is set incorrectly then it would engrave the design in the wrong orientation. This could also be related to your start from mode.
@@lightburnsoftware7189 so i took a look at perforation mode but didnt find a way to produce bridges... could you link any more info bout this topic, its superinteresting for me, as i use my laser mainly for making masking stencils.. thanks !
My radiator controller is stuck on engraving one file, it will not accept any new projects, just says the machine is busy or paused. Please if u can help greatly appreciated
Hi there late to the party but hope some one can help finally got my cnc 3018 pro laser working due to this program working grate apart from it burns when moving along the move lines any help thanks in advance
I'm having problems with the last update for lightburn, the trace after etch is off and so is the cut layer it's like a prism the further from home the further off it is please help or tell me how to uninstall the last update till this is fixed
"Open" brings the specified file into the workspace replacing anything else that is already there. "Import" brings it in in addition to anything already there. So, for example, you could do three imports to bring in three drawings that you wanted to use in your project. I'm sure you figured this out by now but maybe the next person hasn't.
@@lightburnsoftware7189 Took a bit of time, but I can now import .png files and am good to go as far getting the cut down and saving saving as .lbrn2 file. Before trying it out at Makerspace, I should probably ask about the power/speed settings. Right now I am just cutting scrap chipboard, 12 x 12 inches. I would like to put about three 3" images across and down. Is there a way I can put images in rows/columns? Any help would be greatly appreciated. Lucie
HELLO I AM A NEWBODY I BUY MY MACHINE 2 DAYS AGAIN, TRYING TO USE THIS PROGRAM BUT MY DOES NOT APPEAR THIS PART TO CONNECT THE PRINTER, WOULD YOU LIKE TO HELP ME?
Nopal is a name of a cactus and after 2 hours of typing nopal this and nopal that i can not find one image that is not a cactus, little hellp please dm if you would like.
ty so much looks like he shut down all the places that had it, of well, A few people then called him out to disney which id say he will get a call or letter soon
Hello, I am female, 81 and learning to make cutouts on a laser machine at the Rochester Makerspace. I am hoping you can tell me where I can download the dragon image you use in this tutorial. I learn better with images provided with tutorials rather than those I can grab from the Internet. Fingers crossed. Lucie
We have not tested these specifically in house but they do state they are LightBurn compatible. I would highly recommend starting with the trial to verify this before purchasing.
Sadly the snapping feature is not work well at all. In 10 attempts, I was only able to get an accurate snap one time. One attept was .057 (1.5 mm) off location. It would be really helpful if it could snap within .002 (.05 mm) 100% of the time. Please fix this.
@@lightburnsoftware7189I don't know how to post a screen shot, but if you could get the snap feature working like the OnShape CAD program's snap feature works it would be great. What I need is an easy way to snap to the end of a line. I know I need to have the cursor showing crosshairs. The challenge is getting the cursor into that mode. Most of the time I get only a small horzontal line. Thank you for giving this matter your attention.
Hi , I'm new with lightburn and just started my trial today. After 2 hours I didn't move any forward because I'm stuck with material library. My library is clear and there is no presets of materials. When I click on load my files openes but there is nothing related to library. I have no idea how this numbers set so it was very helpful in BRBL software where you can open library and choose material so you don't have to start from scratch. Can you please help? Thank you
LightBurn works for many different laser systems, and we do not provide a material library because we have no idea which laser you have. The material library is intended to let you store your own settings presets as you discover what works. The maker of your laser machine likely has a table of suggested settings available somewhere to use as a starting point.
@@lightburnsoftware7189 I downloaded my library so this is fine. But laser can't reconnect. It was working yesterday but today just keep flashing red. Is there any specific button to reconnect the laser?
@@lightburnsoftware7189 I'm on trial 2nd day butt but have no chance to learn how Lightburn works because Laser doesn't connect and my time is running.. Can you please help? I even tried delete the laser and reinstall like new laser but red light still flashing and laser doesn't move
@@tonyc6331 "Red light is flashing" makes it sound like you have an emergency stop button pressed, maybe? I have no idea what kind of laser you have, and CZcams comments are horrid for support - neither of us can post screen shots - so my best suggestion would be to post in our user support forum, or send an email to support@lightburnsoftware.com with as much info about your setup as you can so we can properly assist.
@@lightburnsoftware7189 I have Aufero Laser Engraver 2 . But there is nothing wrong with laser because when I switched to GRBL software it connects immediately
if you are going to use some kind of program to simulate the sound of mouse clicks. you should atleast adjust the volume so they don't drown out your voice
Cohesion 3D is no longer an option in version 0.9.02. I had thought that was my issue BUT if you have an older K40 with a M2 Nano board dont even bother; stated in the forums its not supported. Stuck with with the elementary kids with the K40 Whisperer I guess. =/ Really annoying after investing so much time in all these videos and getting hyped about using the program. hope this little fact crushes (helps) someone else's dreams (issue)... ; )
I like your titorials, but with ssomeone that has low vision, you might want to make your mouse larger so it would be easier to see. Nice work on the videos I will be continuing to watch, thanks for uplaoding these.
please use a bigger, possibly colored, cursor. your cursor moves around the screen so fast it's difficult to follow. please resist the temptation to CONSTANTLY keep the mouse moving around the screen.
Thank you for the feedback. This is one of the earlier videos on the channel and much has changed in format since. The goal it revisit some of these earlier videos to update them.
@@lightburnsoftware7189 thanks for the reply but it's not the info I couldn't follow, it was the awful volume of the mouse clicking to drove me mad lol
Tutorial is thorough. But way way way to quick. Can’t see his mouse. Can’t see where he clicks. He assumes you can see where he is going. You can’t. He can do the same thing and just pause for a split second to say here or maybe put a highlighter on the mouse pointer. Good video gets lost in translation. Aggravating
The tutorials are intended to be used as reference but we are in the process of revisiting some of the older videos. Many will be in smaller segments hopefully making them a bit easier to digest.
This is the best tutorial for any program I have seen, leant do much already, thank you.
As a user of lasercut, I am blown away by Lightburn. Incredible.
Very well explained! This SW will be fun to use!
amazing and powerful tool!
Around 17:00 in when you discuss cut by layer order, what did you have to press on the keyboard to select individual lines/shapes out of the entire pattern to move them to separate layers?
Is this a vector file or something? Can you do something similar with imported SVGs?
That Star Wars picture has awesome detail.
Where do I get one of those?
GREAT VIDEO
At the very end of this video, you clicked on the outside edge of the circle, then clicked something to make that on a new layer, what id you hit hot key wise or click to put that circle shape on a new or separate layer?
Other wise, I am with you sir. Thank you for helping us who are totally new to laser software.
I hope you have a blessed week and are staying healthy and safe.
Dale
7:44 From my tests, in the latest version, instead of top-dowm is left-right. And instead of dowm-top is right-left.
The first video I've found wNice tutorialch makes production seem accessible, thanks!
This software is ingenious. I'll be using it for a jtech but can it also be used for the Chinese k40?
Do you have a tutorial or documentation on printing on tile where you use a negative image to printed on painted tile? I know it can be done with GIMP via da big gimpin plug-in, but I dont want to buy two software programs DBG plug-in is $40.
is it possible to trim vectors out? so i want to combine and trim to remove the ones i do not want to cut
Can you please design the UI for every program ever? Please??
Thank you this looks a little easy almost like the silhouette studio :-) just got a laser and was worried about how to work the program but this makes it look like its going to be easy
I thought the same after watching the first video. I can do Studio so I don’t feel so intimidated now.
Hello. What is your suggestion if a person wants to add "nodes" to an image?please refer to 9.10 - node editing. I see that you can manipulate nodes, but what if I wanted to create additional nodes or remove existing nodes?
Thank you.
Hi. how can i make a break in the curve? How to copy only the desired part of the curve, not the whole object?
Thanks for the video and tutorial. It definitely helps for us newbies. Did I miss it or does lightburn have a fu cation for testing the focus of the laser to ensure it is at the proper height above he material? Thanks again.
3 years later, but for anyone else. Yes, it does. I believe on the docked cut panel, it says "z-focus/auto focus". But it only works with a motorized bed of course.
Looks like good software. Just downloaded the trial.
is there a setting in lightburn (off line mode or something) that will allow the software to be used (for design purposes) without being connected to the laser machine..?
my machine is in my shop 2ac away from my house...i would like to edit and design projects wile in the house and not connected to the laser thats 2ac away in my shop.
Where can one find/buy the Vader Vector used near the end of the video? Great tutorials!
Search for star wars aztec calendar
just bought lightburn while i wait for my laser and I see these tutorials are 5 years old so wondering if the program changed and if so are their updated tutorials. I saw in your cuts/layer window the layer says cut but on my version i see line, fill and offset fill and no cut.
Where do you get that starwars design from pretty cool
Thank you for an outstanding tutorial. It seems that the software is a lot like Corel Draw, that I have used for some 35 years. I am going to have fun. Thanks again.
How do i change from MM to inch and Change it from Inch to MM, on the tool bar
Hi and thanks for this useful video. Is it possible to set the "Home" point programmatically within lightburn (for each cutting job) or is it not possible and must necessarily be set via the laser engraver firmware commands before running the gcode produced with lightburn?
If you have a GCode machine, you’re looking for “Set Finish Position” in the “Move” window. Jog the laser where you want it to go after a job, and click that button.
Epic vid yo
excellent video! I want to know where to get that star wars vector!
Can you add more fonts to LightBurn, and if you can how do you do it?
Where do I go to change unit measure to inches?
Wich laptop you recomend for this process
Am I missing something? If I bring in a DXF its a single shape with no editable nodes. Like your logo's dragon eye can't be selected and repositioned. Thanks for fixing the USB connect.
LightBurn Software this is a homerun! Definitely owning this! Thanks
Hi , laser
Diodo can do
Marking over acrilic clear?
Looking forward to the release. Great work. Has pricing been announced yet? Also, is that Star Wars graphic in the video from the public domain or is it your own?
Is there a place where a person can get the LightBurn Dragon AI file? :-) I would like to get that burned and have on display in my shop area so it can get picked up in the video footage for my CZcams channel.
Rookie here! How did you add the two outer rings to separate cut layers? I tried to slow it down but couldn't see how it was done? Thanks so much!
He selected the two rings and then he zoomed down to the bottom and clicked on the red square to change the selected objects to the red layer.
I was wishing there was a time index to the video. This video is linked in the LightBurn Edit Nodes documentation. Unfortunately, when I did find the relevant section, I could really use a lot more coverage of the subject. I don't understand what some of the operations do and I would like to be able to adjust a node by typing numbers (i.e. XY coordinates) so that I could make small and precise adjustments that I can't do reliably with a mouse. Great program. Thanks.
Thank you for the feedback. We are going through and redoing some of the early videos to update them while making them more concise. Nodes will be one that we cover.
In a previous tutorial you mentioned that the “ enable laser firing button” should not be selected if Im using a CO2 laser. My plan is to purchase a THUNDER laser, and im still fairly new to lasering, could you explain why you stated that doing so would be “ very dangerous”? Thanks.
Because the beam from a Thunder Laser (or other CO2 machine) is invisible, and will blind you. The machine comes with a low power red-dot laser that provides the same functionality but is harmless and safe.
@@lightburnsoftware7189 thanks so much for the clarification🙂
Hey sir, can i connect lightburn with blietooth or wifi sir??
my laser doesn't burn anything.it is moving and pretending to do the job but what shall i do that he is burning the image i want?but laser grbl works fine
I know this sounds stupid but which button or tool makes a circle
Absolutely incredible software. However please make sure that your camera is in focus.
whats the name of the fie you used for darth vader
The mouse clicking sound filled me with rage but otherwise it was a very helpful video
the simulated software recording clicks are insane. Good video though
Can you tell me why light burns starts engraving at the wrong place? When it starts, it starts going to the lower left instead of the actual frame
It sounds like the origin may be set incorrectly. If the origin is set incorrectly then it would engrave the design in the wrong orientation. This could also be related to your start from mode.
is it at all possible to curve the text ??
hi. newbie question: doesent the inner circle of the g of lightburn fall out after cutting, or does lightburn cut any kind of bridge?
@@lightburnsoftware7189 wow, perforation mode, i ll check it out, thanks !
@@lightburnsoftware7189 so i took a look at perforation mode but didnt find a way to produce bridges... could you link any more info bout this topic, its superinteresting for me, as i use my laser mainly for making masking stencils.. thanks !
Very informative. I only pray the audio improves in future videos. Warning: for headphone users super loud clicking and mouse slamming noises.
@@lightburnsoftware7189 hrmm it did sound more like a software click. I just wasn't prepared with my headphones on. Thank you!
My radiator controller is stuck on engraving one file, it will not accept any new projects, just says the machine is busy or paused. Please if u can help greatly appreciated
Hi. I have an Ortur Laser Master 2 PRO and I dont have the CUT MODE, I only have LINE, FILL, FILL+LINE and OFFset. I see you have a CUT mode.
My Node Editing feature is not working. Am I supposed to hold Shift or Control down to highlight points in the shape?
@@lightburnsoftware7189 Great! Thank you so much! Yes, I was trying it with a square.
Hi there late to the party but hope some one can help finally got my cnc 3018 pro laser working due to this program working grate apart from it burns when moving along the move lines any help thanks in advance
I'm having problems with the last update for lightburn, the trace after etch is off and so is the cut layer it's like a prism the further from home the further off it is please help or tell me how to uninstall the last update till this is fixed
This is very unlikely to be a software issue. If you email support@lightburnsoftware.com we can work with you to resolve it.
Is there a difference from using File Open vs File Import?
"Open" brings the specified file into the workspace replacing anything else that is already there. "Import" brings it in in addition to anything already there. So, for example, you could do three imports to bring in three drawings that you wanted to use in your project. I'm sure you figured this out by now but maybe the next person hasn't.
Oooo... where can I get that Star Wars design?
This is awesome - and WHERE can I get this amazing Star Wars file???
search for
star wars aztec calendar
Is there a preferred file type to import?
SVG and AI tend to work best from art programs. DXF tends to be best from CAD applications. DXF from art apps tends to be bad at preserving curves.
@@lightburnsoftware7189
Thank you for the Fast Reply. I was Exporting my art file as a .png out of Adobe. I'll try .SVG & .AI
I downloaded a free image and am on to the Preview image; both the background and image are filled with red.
Will this image work for this tutorial?
@@lightburnsoftware7189 Took a bit of time, but I can now import .png files and am good to go as far getting the cut down and saving saving as .lbrn2 file. Before trying it out at Makerspace, I should probably ask about the power/speed settings. Right now I am just cutting scrap chipboard, 12 x 12 inches. I would like to put about three 3" images across and down. Is there a way I can put images in rows/columns? Any help would be greatly appreciated. Lucie
Does it have a rotary connector option?
Thank you so much! I'm seriously looking forward to purchasing the software in the near future!
my text are super tiny on my tablet. I see the settings for the tool/menus etc, but the text are super small/unreadable. What do I do?
LightBurn Software I don’t have a surface pro. Dell
LightBurn Software thank you. I will do it now
Is this 5 year old video current to show me what I need to know, or is there a current one? i have some experience with lasergrbl.
HELLO I AM A NEWBODY I BUY MY MACHINE 2 DAYS AGAIN, TRYING TO USE THIS PROGRAM BUT MY DOES NOT APPEAR THIS PART TO CONNECT THE PRINTER, WOULD YOU LIKE TO HELP ME?
Have you downloaded the driver for your laser Paloma?
@@lightburnsoftware7189 drive.google.com/file/d/18hA_QuRbNZkgo8JE7h3l5GWog-E0Qp2e/view?usp=sharing
@@lightburnsoftware7189 WHEN I START HE IS GOING ON THIS SCREEN
Lightburn could you release the Darth image somewhere so we can burn it because it looks great.
Nopal is a name of a cactus and after 2 hours of typing nopal this and nopal that i can not find one image that is not a cactus, little hellp please dm if you would like.
ty so much looks like he shut down all the places that had it, of well, A few people then called him out to disney which id say he will get a call or letter soon
Hello, I am female, 81 and learning to make cutouts on a laser machine at the Rochester Makerspace. I am hoping you can tell me where I can download the dragon image you use in this tutorial. I learn better with images provided with tutorials rather than those I can grab from the Internet. Fingers crossed. Lucie
@@lightburnsoftware7189 No problem, thanks so much for responding!
Hello! LightBurn soft is ok for my Atomstack A5, M30?
We have not tested these specifically in house but they do state they are LightBurn compatible. I would highly recommend starting with the trial to verify this before purchasing.
Works with P7 M40.
where did you get that star wars file!! that is awesome
If you find it please let us know where to get it
Found it, jesus it took a long time with some help from Lightburn nudge lol dm me the file needs a lot of little bits of work but i got it
If purchase software from lightburn directly could I get full set of document or guideline book and full of videos?
All documentation is online (docs.lightburnsoftware.com) and it can be downloaded as a PDF as well.
@@lightburnsoftware7189 how can I purchase soft directly from LB?
@@kimlaihout5381 - purchase here: lightburnsoftware.com/collections/frontpage
When I start paid for Lightburn, about every third or fourth time I need to reenter my activation code.
How do I choose which part I want to engrave and which to cut?
Go through this - it will help give you the basics:
docs.lightburnsoftware.com/SimpleProject.html
Thanks bro! Ima really new in this! @@lightburnsoftware7189
Thank you mister!@@lightburnsoftware7189
Sadly the snapping feature is not work well at all. In 10 attempts, I was only able to get an accurate snap one time. One attept was .057 (1.5 mm) off location. It would be really helpful if it could snap within .002 (.05 mm) 100% of the time. Please fix this.
@@lightburnsoftware7189I don't know how to post a screen shot, but if you could get the snap feature working like the OnShape CAD program's snap feature works it would be great. What I need is an easy way to snap to the end of a line. I know I need to have the cursor showing crosshairs. The challenge is getting the cursor into that mode. Most of the time I get only a small horzontal line. Thank you for giving this matter your attention.
Hi , I'm new with lightburn and just started my trial today. After 2 hours I didn't move any forward because I'm stuck with material library. My library is clear and there is no presets of materials. When I click on load my files openes but there is nothing related to library. I have no idea how this numbers set so it was very helpful in BRBL software where you can open library and choose material so you don't have to start from scratch. Can you please help? Thank you
LightBurn works for many different laser systems, and we do not provide a material library because we have no idea which laser you have. The material library is intended to let you store your own settings presets as you discover what works. The maker of your laser machine likely has a table of suggested settings available somewhere to use as a starting point.
@@lightburnsoftware7189 I downloaded my library so this is fine. But laser can't reconnect. It was working yesterday but today just keep flashing red. Is there any specific button to reconnect the laser?
@@lightburnsoftware7189 I'm on trial 2nd day butt but have no chance to learn how Lightburn works because Laser doesn't connect and my time is running.. Can you please help? I even tried delete the laser and reinstall like new laser but red light still flashing and laser doesn't move
@@tonyc6331 "Red light is flashing" makes it sound like you have an emergency stop button pressed, maybe? I have no idea what kind of laser you have, and CZcams comments are horrid for support - neither of us can post screen shots - so my best suggestion would be to post in our user support forum, or send an email to support@lightburnsoftware.com with as much info about your setup as you can so we can properly assist.
@@lightburnsoftware7189 I have Aufero Laser Engraver 2 . But there is nothing wrong with laser because when I switched to GRBL software it connects immediately
Where can I downloaded this calendar?
If you're referring to the Star Wars file, the creator does not want it shared.
Windows 3.1 and 1995 called....they would like their really loud mouse clicky sound back
Any way we can get that star wars based graphic????
This is a very old video and the graphic is no longer available.
if you are going to use some kind of program to simulate the sound of mouse clicks. you should atleast adjust the volume so they don't drown out your voice
@@lightburnsoftware7189 it's still good.
Cohesion 3D is no longer an option in version 0.9.02. I had thought that was my issue BUT if you have an older K40 with a M2 Nano board dont even bother; stated in the forums its not supported. Stuck with with the elementary kids with the K40 Whisperer I guess. =/ Really annoying after investing so much time in all these videos and getting hyped about using the program. hope this little fact crushes (helps) someone else's dreams (issue)... ; )
I like your titorials, but with ssomeone that has low vision, you might want to make your mouse larger so it would be easier to see. Nice work on the videos I will be continuing to watch, thanks for uplaoding these.
Thanks for the feedback! On current videos we do have larger rings around the mouse for clicks to make it easier to see.
Good video, but damn why is the clicking in the video so loud!!
please use a bigger, possibly colored, cursor. your cursor moves around the screen so fast it's difficult to follow. please resist the temptation to CONSTANTLY keep the mouse moving around the screen.
Thank you for the feedback. This is one of the earlier videos on the channel and much has changed in format since. The goal it revisit some of these earlier videos to update them.
Yep, audio is frustrating. You scroll the mouse around to fast; and all around a little to fast paced.... Perhaps go back and re-do.
Loads of good info thanks but that mouse clicking 😬
We are redoing some of the earlier videos to update them and make them a bit easier to follow along with.
@@lightburnsoftware7189 thanks for the reply but it's not the info I couldn't follow, it was the awful volume of the mouse clicking to drove me mad lol
Mouse clicks are loud and distracting
Nice video, however if I was being honest, you cover the features a little too fast.
Thanks for the feedback. We are going through and redoing some of the beginner videos in smaller segments and working on making them a bit more clear.
I'm sorry I'm sure this is a great tutorial but I can't listen to all the "Ums", I had to stop but hoping I can revisit at another time.
I appreciate the tutorials, but the constant mouse clicking sound is driving me nuts, I will have to learn from another.
For me, the additional auditory cues to the red circles on mouse click are extremely helpful when learning new softwares. Turn it up!
Um. Um. CLICK! Um. CLICK! CLICK!. Um. Um. 🤦♀
You're watching a video from over five years ago, when it was just me. Production quality has improved a lot over the years.
@@lightburnsoftware7189 I get that. But for what you charge people, you SHOULD make a NEW ONE!
Tutorial is thorough. But way way way to quick. Can’t see his mouse. Can’t see where he clicks. He assumes you can see where he is going. You can’t. He can do the same thing and just pause for a split second to say here or maybe put a highlighter on the mouse pointer. Good video gets lost in translation. Aggravating
to fast and hard to follow
you talk too fast
The tutorials are intended to be used as reference but we are in the process of revisiting some of the older videos. Many will be in smaller segments hopefully making them a bit easier to digest.
Use the gear icon at bottom right of youtube and set speed to .75.
Slow down man. Not all of us can follow your curser at your speed. Learned nothing from your tutorial.
We are working on revisiting some of the earlier videos to make them a bit more concise and easier to follow.