World's worst video card? The exciting conclusion
Vložit
- čas přidán 12. 07. 2019
- For part 1, see this video: • The world's worst vide...
Let's build a circuit that displays an image on a VGA monitor! In part 2, I talk about how VGA uses analog RGB signals to send different color pixels to the monitor. I use an EEPROM to store an image and build a simple digital-to-analog converter to generate the color signals to successfully display an image.
Support these videos on Patreon: / beneater or eater.net/support for other ways to support.
------------------
Social media:
Website: www.eater.net
Twitter: / ben_eater
Patreon: / beneater
Reddit: / beneater
Special thanks to these supporters for making this video possible:
Name
Alexander Catchpole
Beau-James Erion
Ben
Ben Dyson
Ben Kamens
Ben Williams
Christopher Blackmon
Dean Winger
Debilu Krastas
Dušan Dželebdžić
Eric Dynowski
Erik Broeders
fxshlein
Gonzalo Belascuen
HaykH
Ian Tait
Ivan Sorokin
JavaXP
Jay Binks
Jayne Gabriele
Jimmy Campbell
Jordan Scales
Justin Duch
Manne Moquist
Marcus Classon
Mats Fredriksson
Michael Burke
Michael Garland
Miguel Ríos
Mirko Rener
Nathan Wachholz
Nicholas Moresco
Nick Wrightsman
Onion Sniffer
Paul Pluzhnikov
Randy True
Robert Butler
Sachin Chitale
Sergey Ten
SonOfSofaman
Stefan Nesinger
Steve Gorman
Vladimir Kanazir
Örn Arnarson
Want more information or want to try building this yourself? Check out eater.net/vga for schematics, kits, and more!
Nice!
It's more like a cga. No DCA, and few bits on each line. I guess I haven't done those for 30 years... Hahahaha 🤣 (I was and graphics engineer).
I'd say something like the 16-color mode on the CGA, which was actually text mode, but drew no more than the top 1/4 of each character. The characters were either 220 or 221 IIRC (solid block left half. solid block right half), so that you could have 160 "pixels" per line: 80 characters, half foreground and half background color. Background couldn't be anything >7, which rendered some rather bright combinations impossible (like 15/9: white/sky-blue). The 100 lines rather than 200 were a limitation of the video RAM, which would have been too small for 200.
More recently, there were hacks which sacrificed even more resolution on the CGA and used the characters 216 to 218 (25% foreground color, 50% foreground color, 75% foreground color) to dither in a 16-color mode. The results were "plasma" demo effects in text mode and a video player called "8088 Corruption" which ran on a 1981 IBM PC. And a demo called "8088 MPH" which ran on the same PC.
All of these are on YT, and there's another video called "CGA doesn't suck THAT much!" or similar. Some of those examples are quite impressive.
Can you Make this video card controlled by an Arduino?
And you can take an image directly from your computer, or a text...
Nice! Does it have instructions? Also You are no longer answering me 😭
NVIDIA hates him! Find out how he made his own video card with one weird trick!
10/10
Crypto mining farms love him - he's saved them millions!
his kids hates him cause thats all they gonna get
Only 1% gamers can beat lvl 6
Lol nah AMD has more to worry about if this card goes to market
"what do you want from me, I'm trying to build a video card on breadboards" - best thing I've heard all day
I'd like your comment but it has exactly 256 likes right now and that's also too cool
ah nevermind someone messed it up
The other one funny line was “as much fun as colorful stripes are, I want to display more complex image”
I read this as he said it
@@cda32 there's always still 2048 from this point :P
this guy teaching electronics, graphics design, programming and everything in a single video... man that's my entire engineering degree.
As a teacher with a CS and Math background, I can tell you that while this is really impressive, it isn't teaching.
@@RXC13Isn't he teaching if I'm learning from him?
@@RXC13 yes it's much more useful than any formal teaching I got as a CS major!
@@nidavis based
No way he changed between 4 ROMs in order to display his patreons and the bird as well. Just amazing.
Man I want Ben's super power of being able to pull properly sized wires right out of thin air.
Yes! it was magic! I remember cursing all the time when I was trying to wire a flip-flop in class! I was thinking " there has to be a f****ing better way to do this!"!!!
@@leowise2008 build it twice. Ben does. Then again he is a technomage.
Like Professor Farnsworth, he probably has a drawer where he keeps assorted lengths of wire.
I'm more impressed that he's got them pre-routed for his board.
You have 256 likes. Please don't ruin it :)
Also showing off your photoshop, vim, python, and bash skills. This is truly "full stack" engineering.
ben is a god of electronics for me .
@@Mayank-mf7xr ben is based af
I like him, but as an engineer it is for me totally normal to know or learn several things to succeed in a project.
He flexing on all of us
Hahahaha
I love projects like this. They don’t really serve any practical purpose but they’re invaluable for learning concepts. And just to understand what goes into every day stuff we take for granted.
In a nutshell, awesome videos Ben!
what you mean you wouldn't use this as a video card for a raspberry pie? :P
I thought gpus are expensive, but from now I am not sure anymore
@@blackdeath4eternityman the raspberry pi already has a better video card than this tho. I've played Minecraft on my raspberry pi
@@mihajlojovic8631learn more about gpu before comment
"I'm not going to hook this to a computer, at least not yet..." *flashes image of breadboard computer*
All my life, this is exatly the level I've wanted someone to explain and demonstrate me how a picture on the screen is created. Thank you very much!
It's simultaneously less magical yet also somehow more impressive at the same time.
Same for me. I just could not comprehend a human could keep track of whats happening. Ofcourse this is simplified but the perfect amount so I can accept that it is indeed possible
It's deeper than this
@@nicktimmerman2062 mathematical formulas keep track
Redstone CZcamsrs "it's actually quite simple"
That was the most epic way I have ever seen someone honor their patreons
Honor? More like show off
@@danielmalo1753 Looks like someone's jealous.
what is that pfp?
@@questwalkerko it's Stein from the anime Soul Eater
Shiroe from Log Horizon.
Beautiful stuff. I've always worried that the HOW gets invisibly embedded in megachips, potentially lost forever. You keep it alive and visible to the learner. Thanks for that.
chill that’s a lil scary to think about
You can tell a hardware person's writing code when there's a try-catch just to check for a valid index.
Python devs be like
What should you do in that case?
@@HentaiNat Check for the valid index instead of intentionally doing an invalid index to catch the exception
@@davidy22 How would that look like?
@@HentaiNat Just use an if/else instead of a try/catch. Not only is your intent clearer to someone reading your code, it'll also run much faster.
"It might not be the most incredible resolution, but what do you want from me, I'm trying to build a video card from breadboards".
Ahahahah bless you Ben, this is amazing work!
Found at 4:53. Made me laugh so hard as well :D
Blondihacks has a good series on this too, with very similar comments
Give him a New Jersey accent and that statement would be perfect!
You beat me to it. Best quote ever
Love that comment! Ben is simply awesome! Brilliant!!!!!!!
Was watching this to fall asleep, ended up getting a coffee.
Lol same. Was watching with one eye open and when i closed my open eye I got annoyed and opened again. Then just sat up right
Same here 🤣
Ben Eater: digital electronics ASMR channel
Lmao
Almost same. I watched this afternight amd fell asleep
Parts List:
10 Mhz Crystal Oscillator (Full Can)
28C256 EEPROM
74LS161 (x6)
74LS04 (x4)
74LS30 (x8)
74LS00 (x3)
1.5k Ohm Resistor (x3)
680 Ohm Resistor (x3)
15 Pin VGA Female Breakout Board
Hookup / Jumper Wire
4 Breadboards
thnkx a lot !
Can of beer x3
@@antonydecosta6262more like gram of meth 10x if you want to build this irl
Oh man, that 4 bit output voltage divider really tickled me. That's so true genius in it's simplicity.
i agree. almost seems like a miracle how the numbers work themselves out.
its not about the numbers adding up. its just basic electric physics where 1+1 = 2 in terms of current
Yeah I was immediately stumped as to how he was going to vary the voltages and that was clever
I love how you can just hot swap out EEPROM chips to change the image. It makes it feel like some vintage slideshow tech from an old sci-fi movie.
Now, lets give this idea to the professors at university :D No powerpoints or anything. Just breadboards.
PowerPoint 0.1
Hot swap a dozen or so EEPROMs having a second person reprogram them to a different image in a "circular assembly line" fashion. Call it a 0.05 FPS video card system and ship it! *Requires 2 operators
@@Leuel48Fan brilliant
@@Leuel48Fan In the 747 they used as mobile nuclear command they had a button on the podium that would flash a light for someone in the back room to change the slide on the slide projector. They can order world destruction from the plane but it took two people to make a slideshow.
Screw powerpoint next time I do a presentation I'm gonna hotswap EEPROMs for my homemade vga video card
As an analog IC designer, this is so fascinating to watch. You're deeply knowledgeable in everything you do, and you're hacking in the truest sense of the word. At the same time, you do things where I'm like "Wait! That's illegal!" And any applications engineer would have a stroke over. And it just... Works beautifully. And it's an excellent teaching tool.
As a complete noob, and someone wanting to get into this, I'm kinda curious what you find illegal here
I also want to know @@pptheastrologer6870
That’s a whole lot of “Digital Logic Design”, “Integrated Circuits”, and “Computer Architecture” classes combined in two interesting videos! Well done. 👏🏼
This dude deadass built a video card from IC chips and directly plugged it into a flat screen monitor. He did everything from scratch. That's real talent.
No talent bro, I bet he studied a lot to be in his position :)
Next: "Building my own display"
Perfect for running Temple OS
@@Atovange you could study for lifetimes and you still wouldn't be able to grasp the skills needed to achieve that on your own.
"no talent bro", that's exactly what a talentless being would say.
@@FoxhoundULM How could talent teach you how a quartz clock work? It's all hard work and study
Please select your graphics adapter:
1- CGA
2- EGA
3- Tandy
4- VGA
5- Ben Eater’s Breadboard graphics card
BEBGA, Ben Eater's Breadboard Graphics Adapter.
I remember some dos games had options to choose those
6-Hercules
CGA
EGA
SEGA
PS-ONE
PS2
PS3
PS4
His graphics card is better then the one in my computer
the fact that the image it produced is actually not bad and you can even tell what the image is of (to an extent) is impressive good job!
He already mentioned it's distorted because low Frequency 10MHZ
@@HallOfMemeYT i know that, its impressive how good it is.
Ben, you have taken something that seems like an impenetrable blur of magic and brought us behind the curtain to see the "wizard" in the flesh. Thank you!
"What do you want from me, I'm trying to build a video card on breadboards"
Dunno why but that just cracks me up. xD
JackTheSpades it’s just such a self aware comment. It really reminds you how silly this whole awesome video is.
I enjoyed the line "I dont know if this looks like a bird to you" during the hexdump
That needs to go on a shirt...
Swapping eeproms will be a good replacement for powerpoint presentations. Impressive work!!
That's a great idea!
One slide per EEPROM - will definitely keep the number of slides down ;)
@@marwinthedja5450 Stack 50 EPROMs one by one and switch CE pin only.
It's the future! :p
There should be a 90s or something movie where the character does this
@@marwinthedja5450 Actually, two slides per EEPROM, because one bit was left unused - could easily hook up a switch there. Technically over 5 slides could fit because there were also some unused columns and only 6 bits of every byte were used, but that'd require a much more complex circuit, of course.
Not sure why this came up as a recommendation, but we built these 30 years ago in a tech course, as part of our understanding of the display schematics and these signals. We also built the power supplies and operational amplifiers, etc. The fun part was denying the colors and interpreting the interference. Nice to see they are all discrete chips today.
Thank you for explaining this in an engaging, thorough way my CS professors couldn’t be bothered to. You’re making me want to start playing with breadboards and get back into learning hardware.
Hey Ben, you know we all want to see you connect this video card to your 8-bit breadboard CPU, right? Like, all of us want it!
Probably his 8-bit computer is too weak for this gpu, 8-bit bus is not enough to allocate 7500 adresses of video memory. It is only possible to make 4x4 pixel display for breadboard cpu.
With a bit of address mapping (take an address, use it to control a register, then use that register to provide the upper bits of an address when you try to access certain other addresses, called "banks"), and you can fairly easily overcome any memory restrictions. With multiple banks (two is good for moving data, three is good when also executing from "expanded" memory) you get a _very_ powerful system that's almost as fast as an un-banked system.
Демид Ефремов you could easily add stuff in between which takes in an ascii character and then writes that character to the memory at the next available spot on the screen (or newline)
3:03 image flash.
And then we run Crysis on it!
+1 for the audio-environment that your keyboard adds to the python explanation segment.
Definitely not butterfly keys
Funny to see you here! Now get back to working on GM. :P
That mech board glory
@@blodstainer Yup, lot faster than any other kind to type on.
@@tonikotinurmi9012 it's more to do with the feeling and typing experience than speed. Rubber domes just feel bad, and while I like scizor switched, I definitely prefer colicky or tactile mechs. Or hell, buckling spring Model M styles
There's no way I could sit through all the work you did here for this!! Skimmed through it and the first video just to see if it was legit. Computer science people should have the money, NOT influencers. To have the mind and patience to do these kinds of things is incredible! All the effort that went into this for a poor picture blows my mind to consider all the slaving over people who think like you do for each, stupidly faster generations of hardware we get to enjoy. Props to you guys for being the unsung heros, designers and architects of our daily lives
Thank you! People that solve problems for real should have the money and influence. (ie Elon Musk)
@@multivariateperspective5137 Musk’s engineers. He’s a venture capitalist that doesn’t do jack on his own.
people choose where the money goes, if they wanted to fund engineers instead of influencers they could do that
average joe doesnt give a shit about physics and engineering, theyd rather watch funny videos or football - hence so much money in football. Basic rules of capitalism and it's good that way, no better system has existed before.
I love that you include the errors (one might encounter) in your work and not just jumping to the solution
As rudimentary as this "video card" is, you're actually showing how a video card works. I don't know a lot about these things, so to people like me, the way electronic devices work might as well be magic, but this video really shows what the device actually does when it receives an input, and how it interprets electrical signals in order to display colours, creating an intelligible image in the process.
Right? So just imagine when a video card is doing complex things like ray tracing. A video card like an NVIDIA RTX 2080 is a mini-computer--a video computer. 🙂
Naa ppl these days only care bout ma fps
Not only that - I don't know if you catched it - but those 6 resistors that convert the digital image to volts to send to the screen - is actually a small DAC (Digital to Analog Converter).
In fact using the same principle you can make a simple audio DAC ...or as we used to call it....a sound card.
@@jarls5890 I used to wonder why my parents interchangeably use "video card" and "sound card". Little did i know that they are very similar.
@@jarls5890 I want him to build a sound card too now lol
"I don't know if this looks like a bird to you" that made me subscribe lol
This is the greatest line in internet history!
Neo surely saw the bird, that’s some Next level matrix shit. fascinating insight of how a picture is generated... and other programming voodoo ;)
Amazing work! Thank you for taking the time to do this AND record and explain the whole process.
Great stuff! And what an interesting and educational explanation! I was an electronics/telecom student during the period of conventional TTL and CMOS chips, as well as CRT technology, so this is fully understandable for me! Keep up the good work and I might show this video to my kids! I hope they get the passion for these things!
That EEPROM could store 2 more frames. You could make this display a gif.
@Ben Eater gif gif gif gif gif
Gif? You mean an "animation", don't you?
@@l3p3 He means a Graphics Interchange Format image.
1 more frame would be relatively easy - just write the second frame starting at 0x4000, and have a switch to take A14 high to swap to the second frame. 2 more frames would be a PITA.
Moving picture please! I'm sure with a bit more effort it could be compressed down to get a few more frames too.
"I'm not going to hook this to a computer, *at least not yet*" 👀
Play it with 0.25x speed. He's teasing something in one of the frames
3:03
Oh god I'm excited for that
Holy shit that is amazing. I thought you were taking the piss.
You can use the "." and "," keys to navigate from frame to frame
I understand almost nothing here, yet I am for some unfathomable reason compelled to watch it still.
I think at least you get that it shows how VGA pixels are born. :)
And I recommend watching the 1st part too: czcams.com/video/l7rce6IQDWs/video.html
The image destruction around 15:45 made me cackle and choke. It was like that King of the Hill thing about jpegs where the quality just keeps getting worse.
3:03 HE'S GOING TO HOOK UP THE GRAPHICS CARD TO HIS BREADBOARD COMPUTER
yeah, that would be so awesome!!! :D :D
hype
was wondering if anyone else seen that hhahaah
Just saw that and came down here to look for the coment about it. Found ya!
I mean I figured that was the case when pt1 came out.. this is was just confermation.
3:03
*you can’t escape me, single frame of a dummy thicc breadboard*
actually, it is two frames at 30 fps.
42!
@@user-od5ri1fj8m four frames at 60 fps.
thank you :)
LMAO! dummy thicc breadboard ... I'm ded
Even though the object was to display a video image, so much additional information, applicable to more generalized and broader areas, can be inferred. Phenomenal video!
"Lopping off" lower vertical counter bits to make evenly-sized pixels is such a simple & elegant solution lol
These videos were incredible. I feel like I have a better understanding of how Computers display graphics now.
and while the formatting is different (digital instead of analoug) this is still how video signals are sent over HDMI.
I have a Display Port cable that has two damaged wires (I think). So, it's interesting... If I bend the cable at the wrong angle, the wires disconnect and the monitor has little cyan lines going through it, meaning that at least 1 red wire and 1 green wire is having issues.
Me too ;-)
Same here! Great videos.
"I'm not going to hook this up to a computer... yet."
*Don't do that. Don't give me hope.*
Wojtas! Hook it up to the 8 bit breadboard computer!
hey at least it'd be better than my laptop's integrated graphics card
As soon as he says "yet" there is a single frame that contains a picture of his 8 bit computer. So it seems even more likely he will attempt it!
@@TheYaMeZ yep
3:03
14:06
"So what I'm gonna do is add a NAND gate here..."
Actually laughed out loud. Seems like he just throws NAND gates at every issue he runs into
Your explanations are so enlightening! I haven't tinkered with electronics in decades (I'm 74), but now I'm inspired by this and your other videos. Nice work!
Incredible work! I'm very excited to see what future projects you come up with!
nematei ant gala buvo ekrane užrašyta "debilu krastas" nu ble ble lietuviai a ne gieda :D
How it was posted today you commented yesterday
@@aidensamuels3340 Patreons can see the video a few days earlier.
Next project; mining bitcoins on breadboard video card.
@@TheWeberiz Sakes :DDD
in the future "How to make a 2080ti from scratch"
Marcos Tezó not likely
Viper vids gaming plus well maybe in 100 years? 🤔
@@NeoReibert I estimate 60-70 years. Fully 3D printed GPU.
Never ever
Viper vids gaming plus it's a joke, dickhead
He demystified the process of creating images on a screen and ironically by this he makes it even more fascinating.
These videos (breadboard computer, video card from scratch) are amazingly well done. Well done Ben!
The level of organization on your bread board is incredible. I thought I was organized with mine, but yours make mine look like a bird's nest...
Well, he's got a bird in there and that technically makes it a bird's nest too.
It always pays to watch how others organize their circuits.
And his fancy cut's in his video editing.. cause i'd imagine there's a lot of cut out of him measuring them and bending them and removing them...............
Ben: I made the world's worst video card!
Intel HD Graphics: *Am i a joke to you?*
Lirei Taichen ATI: *Am I a joke to you?*
Ha! that comment was also on the first video!
Most integrated graphics in general: *Am i a joke to you?*
S3 ViRGE: Am I a joke to you?
Gedo De Luchs ATI=AMD Graphics and before that the most common integrated graphics in server boards that only needed a screen for setting the thing up.
Anyway, the original IBM PC manual included schematics for everything, even the CGA card built with TTL chips, a RAM chip and an old 6845 chip that did the job of the two bottom breadboards. Max res 640x200 with the 4-bit DAC in the monitor instead of the card. Hercules just added more TTL chips to get 720x350 on the MDA monitor with it's 2 bit DAC.
This man basically ends up answering every random question that pops up in your head at 3am. when you are not able to fall asleep
Damn that was a journey!! Absolutely incredible. I am always amazed at how much work goes in to computer hardware and how little we appreciate it.
People: There's no way you can top your DIY 8-bit computer!!!!
Ben: Hold my breadboard
Next: "Adding a GUI to the breadboard computer"
"actually, don't hold my breadboard, I need it to build my gpu"
When Ben used Red, Green, And Blue wires to represent the color outputs on the breadboard, i was delighted by the attention to detail that went into this.
Thanks for producing such an interesting and educational video.
Me too. But it wouldn't have been Ben otherwise.
Wow that was well done! Congrats! I feel happily educated enough that I knew what the next action was to be, but very cool to see it actually done to the end (I stopped at the rainbow colors and sourcing for odd patterns etc). Makes one appreciate the early VDG chips in little computers like the CoCo series & Atari etc. Cutting edge back then!
Im proud to say that you are the first content creator I've seen in my entire life who has engaged me this much.
Maybe thats because Im also an electronics engineer (I dont really know whether i can call myself an electronics engineer after watching this).
But , my man, you've impressed me the hell out. U deserve much more subs than other good for nothing useless creators.
Kudos.
keep going brother.
Would really like to communicate with you.
Love from India
What do you have to be proud about in praising his merits?
Proud🤡 also why bring up good for nothing creators
It's just a translation thing / lingo. You know, English is not the first language of majority of world. Monolingual americans won't understand this, especially if the other guy is an Indian, who are on average trilingual.
@@curious_banda then he gotta learn that thats not how we talk in the english language
@@zlr9022 Nobody asked to talk with you. You probably don't have friends.
The Patreon thanks via EEPROM images was a nice touch!
We need more videos where the end credits roll by switching out EEPROMs.
Brought to you by viewers like you.
Could you imagine having credits for a movie roll like that? That'd be great
@@jjbailey01 I spy a PBS reference
@@jjbailey01 pbs kids
To fix the thin lines, put a 74LS374 on the output of the EPROM and clock it from an inverted dot clock (10Mhz) & adjust the H-sync to be one step later.
CZcams is truly the greatest human invention. Not just that the content exists, but instantaneous gem feedback such as this comment. What a time to be alive!
I love how there's people like me that kinda get what's going on here, and then there's people like you who *get* what's going on here
Yep, I was just thinking the same. 🙃
Unfortunately the worst case tACC for the EEPROM is 150ns, and the period of the 10MHz clock is 100ns, so using a D-type flip-flop (like the 74LS375) and correcting timing by one pixel would still have potential for a glitch.
However, as he’s dividing the 10MHz by two by dropping the LSB of the horizontal counter, it would be possible to divide the clock to the D-type by two to produce a sampling period of 200ns and never violate the EEPROM access timing. H-sync would then also need to be delayed by two cycles rather than one.
I was immediately thinking the same thing - "you need a buffer on that slow ass prom".
Ben's comment about sdram being faster and that this would solve the issue is misleading too. Let's say he used some low latency ddr4 with 15ns latency. That might work, but only because the monitor is too slow and likely samples towards the back end of each 25ns pixel. An old crt would shift the image by about a half pixel and if it was a good monitor, it would display the invalid data as vertical lines of pixel flicker.
A 4k pixel is less than 2ns - so sdram is always buffered.
18:30, "I don't know if this looks like a bird to you" gave me a good chuckle. Great video, really fascinating stuff.
This was so neat! I've never seen a breadboard in my life (and have no education in computer logic), so I struggled to follow along when you were plugging up a storm there. But still interesting to watch!
Last time I was this early this calibre of video card was considered good.
IKR, 64 colors was a dream config for me for years!
I remember the 1st pic i ever displayed on the 1st computer i ever owned was of Gloria Estefan. I downloaded it over a phone line modem and it had worse resolution than this. Man was i excited!
04:55 "I mean, what do you want from me ? I'm trying to build a video card on breadboards".
That's the most badass punchline I've ever heard
Watching you explain this was the exact same to my brain as watching a speedrunner explain a complex glitch in a game I hadn't played yet.
I wonder how many different things I could actually do if I gave them the proper amount of time and training. So much of what you were saying I have absolutely no idea but it's all incredibly contextual and represents concepts that can be applied in multiple alleys.
Makes me think I should have more confidence in my abilities IRL. I mean the only thing that separates me from conquering that incredibly complex glitch is time and effort. I guess it's the same for the real world.
Just shows how beautiful the engineering process is, from an idea, to hardware, to software, to debugging, to finished product, with testing at every step.
Absolutely beautiful when we are a spectator but extremely excruciating when we are the ones doing that
@@hello123s exactly. In my hardware classes, testing even a simple module with testbenches was hard and annoying. This one-man show is an absolute marvel. Bravo.
You've got space for several images in that eeprom, right? Could you add a 'frame' counter and have it play a (very) brief animation?
Or a GIF
@@mrtuffguy2769 JIF
@@morganthomas1463 Graphics Interchange Format
GIF
@@Iceykitsune have you heard of this brand new concept called “joke“?
I'm both surprised and not surprised I found a comment from you here! Eager to learn more about AI safety btw!
I understood 50% (got lost in the details), but was still fascinating to watch. You solved the mystery of a graphic card!
Why is it when I watch a Ben Eater video during the day I fall asleep, but when I watch late at night when I'm supposed to be sleeping I remain alert and interested throughout the whole thing?
really makes you appreciate how amazing it is just to see a 1080p desktop
Or run a game, even more crazy
yup, it would be kinda cool if big video card, and computer component companies in general, would do this kind of educational videos with narrators good such as this.
@@DreamskyDance Well, a video card, even a low-end one is a thousand times more complicated than this one plus its parts are a lot tinier. Such cards are also produced in a factory. So, making an educational video would be extremely difficult.
@@perfectlybalancedasallthin9319 thera are educational videos about black holes and 4th dimension so i dont think its that hard to make one about videocards
@@david2438 yup.. i think its more of an issiue of propreitary technology. But it would be interesting if someone could show on a bit simplified examples what exacly happens in Nvidia RTX for example ( as opposed to my old 1050 Ti ). There are specs of cards with release and all, thats nice. Imho in depth educational video would be really interesting for some people.
Cool! Now we need to make a Ray Tracing module to this breadboard card!
I guess if you dont need it in real time it is doable :D
cue factorio raytracing engine built with in-game elements
@@mestevesx I believe that factorio experiment you mentioned did ray casting, not ray tracing. But it surely is an incredible achievement on its own.
@@onuktav Yeah, my bad, I thought the had the same principle, but one displays light as it is on camera, the other displays retangles at it's distance location. or something like that
Wouldn't the card need to support 3d internally to support hardware accelerated ray tracing? I dont know understand your comment.
And make a GIF that goes on and on at 4k
I just found your channel @Ben Eater. This is GOLD!
when you were prying out the eproms to change the images it reminded me of old projector slides. I love this project because it shows how the basic a image can be displayed while still talking about voltages, resistances and basic electronic components.
Is there any alternatives to using EEPROMs? Too costly
Me : *build my own pc*
Also me : *Think i am good with computers*
Ben : Makes own video card
😂😂 same
Me : * can write assembly programs with only self education and online courses and build computers too *
Me : wow i'm kinda good with computers
Ben : * Draws stuff on a monitor with some electricity , wires and holes *
You should consider doing a bonus part 3 where you load 3 unique images into the remaining memory and slow the clock enough to make it animate like a GIF!
He could probably just use the vertical blank for advancing the image. That'll be a 60 fps animation.
_Insert joke about 30 fps consoles here._
xD
Honestly that would be a cool idea
@Richard Clutterbuck not with all games, some of them run at 30 or even 30 unstable
Am thinking hoock it up to a raspberry PI and we can have some 100x75 pixel fun
I never expected to learn this deep how images were shown in the screen of my laptop. Impressive.
This and the previous one might be best videos I've ever seen. I am blown away by the sharpness of your intellect Ben, both in figuring out how to do this conceptually and the execution of the build and the video. It's also extremely inspiring. You've made me believe that I am capable of understanding complex digital electronics and I've already ordered parts to start playing around. Thank you
Just wrote my first "Hello world!" program. Came out to youtube to hang with the tech types. Turning off my computer now.
Dont give up
Don't give up, i work as a programmer and the electronic stuff he does may as well be magic to me, the only thing i understood was the python script and the binary hex part.
Don't give up! We all started at "hello world!" We all started out learning the basics. The rest is just study and application. If you are truly interested, you could be doing stuff like this with some study and practice.
Everyone starts at “hello world.”
And some of these don’t give up. Keep going!
@@diablo.the.cheater Funnily enough, that was the only part that seemed like magic to me! I haven't seen shell commands in YEARS
2:58 "I'm not going to hook this up to a computer just not yet" I saw that freeze frame at 3:03!
pasteboard.co/IORD4YR.png
it's a spoiler to show that he's going to connect it to his homemade CPU ? =O
Same. Tried to catch it, that one frame, but couldn't! Hours of fun! :P
@@TheoPantazi put playback speed to 0.25 then pause it
@@mikuhorizon yep I did, I forgot about the playback speed setting, thanks! :)
@@TheoPantazi or pause near the frame and press fullstop key "." .......on pc xD
That girl has appeared in every Machine Vision class in the whole world
This is the most I've ever learn in 30 minutes... amazing
I found this hilarious as a Windows user - Microsoft Paint forced bitmap on us for years - but you wrote a python script to extract a bitmap from a png =D
OHH so thats what bitmap means!! It's a literal map of bits!
This is a big revelation to me for some reason
For what it's worth, you'd have to do the same with a bitmap (.bmp) image -- they write data from the bottom row of pixels to the top, and of course still have all the header data and don't have the necessary padding.
I get it
Yeah I think he could have just increased the canvas size to 128x256 and filled the bottom and right edges with black, then exported as bitmap to avoid the whole python step, right?
You wouldn't get indexed colours like shown with Paint's BMPs, it forces you to use its colour indexing.
"I don't know if this looks like a bird to you"
Yeah it does, really does.
Insane stuff and so cool. Amazing to think that the actual boards are also having to deal with multiple resolutions too. Although, the dodgy ancient python code hurts my daily Python 3.7 using heart :P
Amazing explanation! Hope that I had seen this when I was studying electronics engineering!
This is the way everything should be explained in universities. Amazing job!
I'm pretty sure we would have understand woman by now then :>
That's a terrible idea, especially considering how certain disciplines are logically incompatible with using an example as a metonymy for theory.
He does teach in a university. Lol.
isn't it how they explain it in universities already?
Thank you CZcams for remembering I wanted to see this video, as I subscribed on the previous one!
I forgot to subscribe last time but CZcams was kind enough to notify me of the new video anyway.
I honestly wish stuff like this was highlighted during the IT-courses at university. But i have been fortunate enough to work with 16-bit ISA and a time where BIOS-updates were regular ifnot old-school, so i could understand most of it. Many thanks!
The most amazing thing about this whole project: not a single decoupling cap. Who was that that said we need decoupling caps? Oh, and you could fit 2 images in a chip and just flip that address line. . . Or even use a 28C1024 and put a counter on the upper address lines. ;-)
finally, now I can run minecraft shaders.
I'm an electronics newbie and I'm impressed that your explanations are detailed enough to follow along without being verbose. I'll keep watching.
You've come to a great place to learn, then. I would also recommend a couple of other CZcams channels: *Great Scott!* and *Julian Ilett*
A recommendation for a follow-up video would be to store smaller tiles and basic transform functions (rotate 90 degree intervals, horizontal/vertical flip) . This may reduct the data requirements and lead to higher resolution potentials. Great videos, Ben!
Me: can I get a video card Mom: we have a video card at home The video card at home:
I noticed one of the sync wires isn't hooked up correctly I believe. On the second breadboard from the bottom, the white sync wire is hooked up to pin 13, which is an input of the flipflop. Whereas the yellow sync wire correctly is in pin 12. Could that cause the problem with the black bars or am I wrong somewhere?
You're right, it looks like that was hooked up wrong! That would have made the horizontal sync pulse much narrower than it should be, which apparently the monitor was able to deal with just fine. Presumably I didn't notice it since it worked. But hooking it up to the correct pin which provides the longer correct pulse still gives you the black bars so I think my diagnosis of the slow ROM read time is still likely to be what's going on. Nice catch though.
Incredible catch if I might add
@@paladin1147 I double this. I look at those holes in the breadboards and I still can't get where to put wires. I believe that all holes on the same column are connected between each other. Amirite?
Where's this bread you guys keep talking about? I wanna sandwich now. 😂
Alter Falter hast du ein Auge fürs Detail 😯
Help! I'm from the future. In 2025 Ben Eater's breadboard computer takes over the world.
We are all trapped in a 8 bit lo-fi minecraft hell
LMAO
8 bit lofi minecraft hell sounds like a chill venue
hell? you mean paradise
Shit...
Until the creepers come
Subbed. Man it was very interesting to see. All the knowledge I have, found life in your hands. Thanks.
This was such a well presented and fun video. Excellent content!