Suzuki SV650 Oil Change Procedure Using Rotella T6, Suzuki Genuine Parts Oil Filter, & Crush Washer
Vložit
- čas přidán 3. 08. 2024
- I recently noticed that the @PASSIONBUILT CZcams channel has a good amount of in depth SV content. But nothing as simple as an oil change... So today we are going to add an SV650 oil change video to the channel! In this video I will show you a step by step process on how to change your oil on your SV650 and what parts, tools, and oil I prefer when I do my oil changes. This process is generally the same for all models from 1999-2021. So if you have a first or third generation SV650. No need to worry. This video will help you out! If you enjoyed this video or learned something. Please hit that thumbs up and SUBSCRIBE to the channel for more SV related content!
For all of your SV650 / SV1000 part needs. Please visit my website, WWW.MOTOPARTSSOURCE.COM
ALL PARTS AND FLUIDS USED IN THIS VIDEO ARE LISTED BELOW.
- OIL : ROTELLA T6 (2.4QTS W/O FILTER CHANGE / 2.9QTS W/ FILTER CHANGE) (PLEASE CHECK OIL LEVEL AFTER RUNNING BIKE AND ADD OIL IF NEEDED!)
- OIL FILTER : SUZUKI GENUINE PARTS FILTER (PART # 16510-07J00)
- DRAIN PLUG CRUSH WASHER : SUZUKI GENUINE PARTS CRUSH WASHER (PART # 09168-12002) - Auta a dopravní prostředky
Great videos. As a new to me owner of 2 (1st gen, 2nd gen) race/track SV's I find this a great source of information. Just to add I pour oil into the oil filter about halfway or so, been doing that for all my vehicles for over 50 years...
thankkkk you so much for this video!!! That debate of the crush washer was driving nuts! the right way is how you do it! thanks
No problem at all. I’m glad this video helped you out. Thanks for watching 😎
amazing vid, thank you never thought about using t6
Thanks for the feedback. T6 is a great all around oil. 😎
Awesome video! Looking at getting an SV650.
GET ONE. YOU WON’T REGRET IT 😎
That was a great kick 1:05
Lol thank you! Please subscribe to the channel 😃
thanks for uploading this for everyone. i enjoy your instructions and timelines helped a ton. also for some reason my 09 sv650a showed overfilled even though i followed the instruction manual of 2700ml for oil change+filter. i had to bleed out 100 ml; i heated the oil and checked on front/rear stands too.
Thanks for watching! Not sure why yours was overfilled. Did you run the bike long enough to get the oil through the cooler and fill the filter?
@@PASSIONBUILT yea i did
Damn it really is as easy as it looks in the manual.
I WAS THE 4K SUBSCRIBER WOOOO
Thank you for subbing and helping me reach 4k subs! 😃
Hi! Just subscribed, I have a Sv650 and new to bike ownership. Can you do a video about how you clean your chain?
Thanks for subscribing. There are tons of chain cleaning guides on CZcams. My chain needs to be replaced soon so I’ll probably be making a video on that 😃
Wth bro literally just commented on your other video and im doing this tomorrow......VERY MATRIXY
Haha thanks for the follow up comment! Get that bike serviced so it lasts for many miles!
Also! One more thing I just thought of since you said you bought an SV1000. You NEED to pull your magneto cover off and inspect the magnets on your magneto. SV1000s are notorious for having the magnets come loose in the magneto. Causing shrapnel to break off into your engine and pretty much grenade it causing catastrophic engine failure. So please try to do that service soon! 🙂
@@PASSIONBUILT thank you bro will do asap 👍
No problem. 🙂👍🏼
Thanks for the vid, im about to change the oil in my sv1000s which has been stored for about 8 months and i suspect some fuel may have leeked into it as the oil level is high, to the top of the window, so better safe than sorry. Question is should i change it cold IF there's possibly fule in there or is it still ok to walm it for five minutes first?
Thanks for any advice 👍
No problem! Thanks for watching 😃
Honestly I don’t see any harm of running it for 5 minutes to warm it up. If there really is fuel in the engine, which I really don’t think there is. It would help flush out any grime in the engine. But good choice to change the oil on the bike after it’s been sitting for a while. 🙂👍🏼
@@PASSIONBUILT thanks, changed it all today and the oil came out clean and there wasn't any fuel smell to it so i guess it was just higher because it had drained down from the engine maby but better safe than sorry. Thanks for the reply 👍
Awesome video man. Would this be the same procedure for my Sv1000s?
Yes but I believe the SV1000 has a different oil capacity. Double check your owners manual to make sure you’re putting the right amount in.
Thanks for the feedback man. Yes the sv1000s takes 2.7litres.
Your oil was pretty clean as I saw light thru it especially when the oil filter was removed. Does the magnetized oil plug come
on the bike or did you add that? Figured I would ask, I'm really looking at dual sport bikes but this little bike is one of the
street bikes that I would consider b/c the riding position is so good for us older folks. Back to watch the ending.. peace
Most SVs have the magnetic plug installed. I’ve seen some without. But the majority of them have it. Dual sports are great. I’ve been looking for a CRF300L but haven’t found one used in my budget. Thanks for watching.
@@PASSIONBUILT >> Yes, the Honda 300L comes in a couple of versions, I like the "Rally" which comes w/ a larger
gas tank, the small wind screen, and different lights. But in my list the Rally is in the top right now but when I was
looking at suspension upgrades I saw an upgrade using a Kawasaki bike part for the SV650. I saw how good this
bike looked & I saw yours.... IF I change my mind for a street bike, I think the SV650 is a nice choice. peace
What about the stands? Where do you get those? Also, do you have any tips on finding used/or new OEM parts? Thanks
Great questions. The stands I’m using are called Powerstands Racing but I don’t know if these specific stands are readily available anymore. However, you can buy similar stands through other vendors online. Just make sure you buy SV specific pins for your front stand. Also, for all of your used OEM part needs. Please check out my website! WWW.MOTOPARTSSOURCE.COM
The best place to buy new OEM parts is www.oneidasuzuki.com
@@PASSIONBUILT thank you for the info.
Hey brother. Thank you for the lesson. Your videos are super helpful. I have a 08 SV650s ABS, and I can’t find the flasher relay. I installed some led indicators and now I have hyper flashing. How can I fit this issue?
The flasher relay should be under the rear seat / cowl. If your bike has had the wiring messed with before. It may have been moved but I promise it will be very easy to find.
@@PASSIONBUILT you are right. It was messed with and there’s nothing there now.
Bummer. I hate when people mess with wiring. Hope you figured it out!
I had to replace the battery because it wouldn’t hold a charge. To my discovery, when I went to put in the new battery I saw the relay. The previous owner rewired the relay and placed it under the battery. It’s a cleaner look.
That's great. Glad you found it. Did you change the flasher relay to make the signals flash correctly or are they still flashing fast?
What do metal shavings mean on a bike? I found some on the drain plug of my recently purchased 2008 SV650S when I did a service on it
Depending on how much you found on the drain plug. I would recommend cleaning the plug and changing your oil sooner than usual just to verify it’s not full of metal shavings again. If it has excessive shavings. You may have some internal engine issues that may need to be addressed. Metal shavings could be a result of your internals not being properly lubricated, possible normal wear and tear, wheelies, etc.
Also, where is the best place to find a crush washer and oil filter? Are oil filters model specific?
Just go to your local Suzuki parts dealer for the crush washer and filter. I buy the washers in packs so I have plenty on hand.
Which kind of size crush washer do i need?
Do you u also use rotella T6 for your SV1000s? Also please do a video on the Clutch rod seal
Hey there. I don’t own an SV1000. Both of my bikes are SV650s. The SV with no lower fairings is an SV650S and the full fairing SV is an SV650SFA (full fairing with ABS).
But yes, you can run Rotella T6 in an SV1000. It works great in the 1000 models too. Plenty of SV1000 owners run T6 with no issues at all.
As for the clutch rod seal video you are requesting. I don’t need to service that seal on either of my bikes so I cannot make that video at the moment. I apologize. I do have a complete clutch assembly removal video dropping today at 12:00 PM EST if you’re interested in learning the disassembly process to that. 🙂👍🏼
@@PASSIONBUILT yes I am interested in that because I will need to replace the clutch basket for the SV1000s . It has a famous factory design flaw where it vibrates after 10000 miles of use. Known as "chudder". I encourage you to get a 1000 though, its a fiend lol
The SV1000 is a nice bike but I already have too many bikes that I don’t have time to ride lol
I may actually be downsizing my collection soon as well 😩
@@stanza77 where did you get your new clutch basket from? Did you have to send yours in as a core? I have the same issue 2006 SV1000 it’s always made that sound
@@The1JBanks hate to admit it but I did nothing about it so far. I just got used to it. It’s not too bad on my machine at this point.
I’ve never replaced the crush washer in 8 years of ownership and never had an oil leak. Do you really need to replace them?
Yeah. I always have a pack of them on hand and replace them every time. You’re lucky you’ve never had a leak.
I herd they changed the formula, and now it does not protect interior engine parts. only good for the wet clutch is that true?
I’ve never heard about this. I don’t believe that’s true.
All my old oil goes in my diesel Mercedes tank further more getting more use of
That’s awesome.
@@PASSIONBUILT gotta have something to drive up here in the pnw as in castle rock we get a quite a bit of rain
@passionbuilt have you ever had a sv650 consuming oil? If you did, any tips?
I’ve never owned an SV that consumed oil. But it’s common among engines that haven’t been serviced in sometime or tired engines. Worn out piston rings and valve seals could cause this. How many miles are on the bike?
@@PASSIONBUILT 18k miles.
Oil is 1200miles old.
I do a lot of high revving mileage, but 1L in 1200 miles seems excessive even in old bmw standards.
Bike runs nicely and pulls well, can't spot any drip on the floor and no blue smoke nor oil in exhaust or spark plugs.
I'll try some frequent oil changes to see if it goes back... it's weird cause I've owned engines known for oil consumption but no one talked about SVs being oil burners.
Strange, my manual calls for 10w-40 not 5w-40
I see you used 5w-40 but the manual says 10w-40, which I bought, for nearly $80. What is the difference?
5 and 10 are viscosity ratings. I live in Florida where that number doesn’t matter too much since it doesn’t get cold enough down here lol
Hi, what is the size for oil filter wrench? 68mm or 64mm?
I honestly don’t remember off the top of my head. I apologize.
What size is the crush washer please
Not sure off the top of my head. I just go to my local Suzuki dealer and get a handful of them every once in a while.
If yo going for copper washer, it’s outer 18mm x inner 14mm x thickness 1.5mm
So 18x14x1.5
Need 06 SV650S engine, any advice?
Where are you located?
@@PASSIONBUILT Charlotte, NC but I travel to FL alot for work, just got back from working in Melbourne, Ft Lauderdale, Coral Gables, and Tampa. Reason I mention this is I believe you are in FLORIDA
Yes. I am in Florida. I have a 2007-2009 engine in good running condition that I haven’t listed yet. It will fit 2003-2006 models.
That's the dual plug, correct? I know that will work but is there anyway to take advantage of the dual plugs if my bike is an 06 SV650S? Either way, what's milage, price, etc.? It's going in a track bike
Yes, dual plug. Not really any major advantages. The additional plugs will just remain unused.
And that’s why I don’t use crush washers.
Because they need to be replaced after use?
I like to prime the oil filter- BEFORE putting it on, so you get oil pressure up right away.
To each their own. 🤷🏻♂️
That is a great practice but not necessary.
I use a car filter
I’m sure there are some car filters that thread on and work just fine. But the Suzuki filters are easily obtainable and are affordable. 🙂👍🏼