Gosen張人穿線法(基本法) / Gosen Haribito Stringing Pattern(Basic)〈DIY羽毛球穿線〉
Vložit
- čas přidán 6. 08. 2024
- 開放原始碼電腦穿線機頭分享,公開原始碼及製作方法 github.com/206cc/PicoBETH ,可以的話,請幫我點個訂閱
此為我在網路上看到的張人2018張人基本法線譜,短邊橫線順序有稍為改一下,短邊豎線拉完直接暫留(原線譜寫短邊先穿一條暫留),然後長邊穿到頂,再回來穿短邊至底。
橫線基本不加磅,如果加磅"較弱"的拍框有機會長邊穿完前就在 4點、8點位斷裂;需加磅的話建議在長邊往上幾條甜區穿完後暫留,回來將短邊穿完後再穿剩餘的長邊。
歡迎一起留言討論~ - Jak na to + styl
真的專業,好厲害
這個太有趣了吧!
DIY穿線蠻好玩的
Thank you for the video. May I know what the difference is with the 2-knots or 4-knots? Usually when I send it for restring, I ask for 4-knots.
I personally believe that a 4-knot method is safer for the racket frame, while a 2-knot method is less likely to lose tension. If the stringing technique is good, the difference is not significant.
Hello, can you tell me what tool you used to insert the share hole? It looks so convenient.
A straight awl with a hole in the center allows a string of up to 0.7mm to pass through. It requires skill to use; otherwise, the string may break easily. Perhaps for this reason, it is now out of production and no longer available for sale.
@@kuokuo702 Could you tell me the name of it? I really want to get it.😂
Search for 'hp-9 badminton' on Google and switch to the image results; you might see it there. I must emphasize again, using this tool requires skill.
您好 可以請教短邊入第幾孔是固定的嗎
請參考gosen官方網站的線譜(最下面)
www.gosen.jp/eng/special/gungnir/
這台是自己研發的機器嗎?
對的 程式碼開源 製作過程可參閱頻道影片
參考 github.com/206cc/PicoBETH