Custom Dynamics Sequential Low Profile BAGZ Saddlebag Lights
Vložit
- čas přidán 12. 09. 2024
- Today, I will do a step-by-step install and show you the new Custom Dynamics Low Profile Sequential LED Bagz Saddlebag lights. I will show you how to install them with and without the Custom Dynamics Magic Strobes. With the strobes, you have to do a simple modification to have proper functionality.
Please join me as I do this install on my 2017 Harley-Davidson Street Glide Special.
I would like to thank Kevin at Custom Dynamics for helping with some knowledge on this install.
Custom Dynamics Sequential Low Profile BAGZ saddlebag lights:
www.customdyna...
Make sure you hit that subscribe button and the notification bell. Thanks for watching.
For great motorcycle content, check out Two Wheel Obsession:
twowheelobsess...
Follow Me on the sites that are called social:
Facebook: / broncoridevlogs
Instagram: www. / broncoride
Broncoride: / comotokelsey1
My Ride:
• 2017 Harley-Davidson Street Glide Special
My camera gear:
• GoPro HERO 7
• GoPro HERO 4
• GoPro HERO 5 Session
• Sena 10c Pro
• DJI Mavic Pro
• DJI Osmo Action
#broncoride #customdynamics #harleydavidson #sequential #supportmvc #led #probeam
They look great! Definitely like the lower profile over the larger saddlebag lights
As do I. Cleaner look for sure.
They light up the back of the bike nicely..Good add on ..thanks for sharing..
Really happy how they came out Jack.
Those lights are totally badass bro. I love those posi taps and use them a lot. Ride safe bro.
First time really dealing with them, but they are super easy to use.
Excellent DIY video much appreciated thanks.
Thanks!
Great video! Will probably be my next install for the RKS. Just did the Tribar and rear lights. Custom dynamics been getting all my money lately😂😂! Ride safe and go RAVENS!
Good luck with the dirty birds this year. You’ll like these lights.
I have something similar but mine are vertical and mounted in between the bags and the bike, thanks for the video, nice work as usual✌🌴☮
I like your set-up on your bike.
Okay those look great. This is an excellent installation video, thanks!
Thanks my friend.
Great video. Very informative installation instructions. Thank you.
Thank you
Thank you for video, I just put my light today.
Very cool
Looks good man. I have the Ciro3D bag blades like those but I think I had to pay around $299. I bought them almost 2 yrs ago when they first came out. Probably would have went with these if they had them back then. Look very similar but with a hefty discount. Thanks for the video man.
The Ciro ones look good too. These sequentials and the latch lights are my favorite ones on the bike.
Those are pretty cool. Awesome install video.
Very cool.
Thanks a lot for the vid. Just out them on. Appreciate it
No problem 👍
They look awesome and easy to installed!
Thanks man
Excellent tutorial and demo. Well done! Take care and rsmf...
Thank you sir.
Awesome lights wish they made them for my bike. Last I looked they didn’t go that far back
You should check. I know they have several for older bikes.
I did and they do. Now to convince the wife she needs them on her bike ( and mine too) lol
Sweet lights, excellent instructions.
Thank you
Very well explained will this work in any motorcycle or just harley Davidson's?
They have different lights for different manufacturers. They mainly deal with HD and Indian. Check their website and hopefully that will get your answer.
great video. did you disconnect battery before installation or it wasnt needed?
It does call for it, but I didn’t do it.
I like this kit. I have a softail which I added saddle bags to it. Is there a sequential light kit for a softail install?
Don't know if it will work on Softail, but in theory, it should. I'd call them and ask.
Yep! have them, they are great.
Great product, huh?
That is one lit bike! Honestly, though, how long did it take to get all that wiring packed away? Hard to believe you've any space left under there.
Really isn’t that bad, but it’s tight. I believe I have 3-4 harnesses now but they all fit.
Just curious how you ran you wiring from bcm to the bags? Did you just run them out under the seat? I did and dont like seeing the wires. Thanks for any info and your bike look sick bud
Thanks man. I did put them under the seat and put a couple zip ties and a couple pieces of black tape. I left like 4-5 inches at end for quick disconnect.
@@Broncoride thanks for the info. I just dont like seeing the wire between the seat and bag. I'm going to try and find a Alternate route so I can hide them better. Ride safe and keep shiny side up and rubber side down.
Awesome video, they prolly need you to do there videos, lol. I do have a question, I installed the sequential turn signals and plasma rods. I did away with the factory turn signals and bar, license plate. I hooked up first towards the rear fender the magic strobe then everything else. Everything seems to be working correct. Just wondering if it is correct,, lol. I have a video I could send you.
Sounds correct. It can change depending on what lights you have installed. Has to be daisy chained a certain way. If it’s working for you, sounds like you did correct sequence. They have tech support there that will verify you did it right. I’ve done that a couple times and they were very helpful.
Bought them Fantastic! Ride safe
Very cool. They work really well.
thats interesting.. I do not remember seeing that lead with the positap at all on the set I have...
They are standard now on what they send out. Think the first run ones didn’t have it, but they’ll send it to you if needed. You only use it If you want to use the strobes with sequential.
@@Broncoride makes sense.. I'm not worried about the strobes... the thing already about throws me into a seizure when I'm looking at it lol... I should make sure to hook it up before the magic strobe though, that might be why I don't think mine look quite right when the signals are on.
Yes, the sequence of the input/output makes the difference.
Great video... thanks for sharing!!!.... are the turn lights yellow or red?
They are red and thank you.
Thanks for doing such an informative video! #unt ;;;
hey, i just found this video, and i wanted to ask did the module with the wire and tap, come with the magic strobes device like one complete unit? from custom dynamics? thanks
No, when I did the install, the sequential lights came with the posi-tap, but I bought the strobes earlier. Don’t know if they have one kit with both sequential and the strobes.
Thx for the response did you do the modification for the Magic strobe or bought it already done?
I modified it with the harness kit that came with this product.
Thx
Thx for a great video!!! Does the red wire come from CD for the magic strobe? Tia
Ty. It comes on the sequential harness. Then you only use posi-tap if you want the sequential lights to flash with strobe. If you want just normal brake, then you don’t need to do.
Do the turn signals flash Amber or red? Hard to tell in video.
Red.
I got the sequential ones but one does sequential one does solid when I turn the hazards on same thing one solid one sequential
Call them. It’s probably just two connectors needing switched. They will walk you through it. Happened to me on one product and I just had to change the sequencing and it worked fine.
How do you add those when filler lights are installed also? 2021 road glide limited. Is it possible?
To my knowledge, you can still do it. I’d call CD just to make sure.
Followed instructions to the T. My bag lights indicate left and right turn lights and run lights as well. No brake lights and they don’t strobe either any ideas?
Sounds like the harnesses might be mixed. Start with from the rear brake plug, then new harness, then strobe. If that doesn’t work, call CD directly. Their tech support is solid and they will walk you through.
Millimeter? we Harley guys what that in inches lol . good Installment
Haha. So damn true.
@@Broncoride 👍
I install the bag lights with the magic strobe my question is do the bag lights strobe too?
Yes
We have a 2013 can you do a video for that year
Hi Michelle, I don’t work for them, but I’d call them for specifics. Probably very similar.
millimeter isnt this the U S most of us use standard
Everything is working except my left blinker ? the left one is working but just doesn’t work when I turn the blinker on
Check the JAE clip and make sure the wires are all pushed through. That usually is the case when this happens. I use a tiny screwdriver to push them in to the JAE clip.
I have a problem with the programming. i don't have the strob module, but i have already changed the rear lights on the motorcycle. this is a Bad dad kit. it looks like it clashes with each other. Can you help me please
I wish I could give you specifics but I’m not familiar with the Bad Dad lights. Call Custom Dynamics and they will definitely help you.
What position number are you using on the Magic Strobe?
I believe I’m #7. Blaster.
I have paint protection film on the side of the saddle bag. Does anyone knows if the 3M tape from the LED light will mess with my existing paint protection film, or at any point I want to remove the LED? Hope my question is clear enough here.
I personally can’t answer but if you call Custom Dynamics, they probably can.
your link for the lights comes up "404 Not Found"
Thank you Kenny. I’m sure CD changed link but I will go in and change.